Ship in a bottle with LED Lighthouse homemade DIY selfmade - Glenlivet 21 Diorama

Another Lockdown, Quarantine Project to make good and entertaining use of time.
All music was obtained by the „KZbin Mediathek“:
A Brand New Start TrackTribe
• TrackTribe - "A Brand ...
Cover Charge TrackTribe
• TrackTribe - "Cover Ch...
Home for the Holidays TrackTribe
• TrackTribe - "Home For...
I Have a Reservation TrackTribe
• TrackTribe - "I Have a...
Hedge Your Bets TrackTribe
• TrackTribe - "Hedge Yo...
Members Only TrackTribe
• TrackTribe - "Members ...
Walk Through the Park TrackTribe
• TrackTribe - "Walk Thr...
Sunday TrackTribe
• TrackTribe - Sunday
Angelic Forest Doug Maxwell
• Angelic Forest - Doug ...
The Awakening Patick Patrikios
• Patrick Patrikios - Th...
Fading LED tutorials:
• Awesome LED light Effe...
• Breadboard Tutorial: L...
A bottleship with LEDs. Mostly I was in it for the lighthouse, but since a lighthouse all by itself, seemed a bit dull; eventhough the fading LED is extremely cool. So why not add a ship from scratch, toothpics an old shopping back and some string?
This is basically every single step that was necessary to make this bottle-ship-project a success. Not shown are of course repeated steps (like the sails) and steps gone wrong. Almost half of the wooden parts you see had to be glued at some point. But it all worked out ok I think.
Best thing: total cost (not counting the 21 year old Glenlivet Single Malt Whisky) is at around 20€ give or take a few. Stretched over 7 months makes an incredibly cheap project.
If you have any questions, ask away.
Thanx for watching! :-)

[@aarjaycee3601]

Sat fascinated by this video, and a German ship in a bottle by a German engineer nicely built demands a comment in German So, AUSGESEICHNET 👍👍👍

[@BALOYBEACHBUM]

I have been bottleing ships for about 5 years now and very impressed with your work! OUT STANDING !!

[@Luiscout]

Outstanding job! And the music is perfect.

[@unique4551]

nice 1

[@olligator22]

Absolutely, beautiful!! You Sir, are a true craftsman!!

[@daveypb24]

Amazing skill and I was genuinely mesmerised for the whole video. Great to see a craftsman at work. Beautiful end product.

[@pauljd2664]

Your video is so soothing and relaxing. Nicely made. Thank you

[@agermangineer]

That is highly appreciated!

[@thomasullrich7655]

Sehr cool! Tolle Handarbeit!

[@derekdoll6451]

This was truly a spectacular video. I’ve been watching these kinds of videos for a few weeks and my dog brought me a stick that she cleaned all the bark off of it. I think I’ll give it a try but in a bigger bottle!

[@karenmusa3052]

Just came across your page. Wow totally amazing, patience and working fingers help lol Just beautiful, thanku for the great tutorial..😊

[@ZenoJohnSABAHAN]

I like the music. Make me calm and almost fell to sleep 👍

[@jankrause464]

Ganz großes Kino 👍🏻!!!

[@sailinginbottles]

Beautiful build! Congratulations!

[@agermangineer]

Thank you, and same to you! 😀🙋🏼‍♂️

[@jeremystark3350]

I'm just here for the jazzy music..just kidding, nice work!

[@udayasirinayake4863]

You are a genius, incredible piece of art...

[@jjohn4156]

This is really a masterpiece well done sir.....

[@giovannirazza9938]

Muy bien .wowww!!!!

[@tolstoi_vitalys1988]

Очень круто!!!!я учюсь потихоньку ,но плохо паруса еще получается!

[@engelbertstrauss2354]

Sensationell 🤩👍🏼👍🏼👍🏼

[@nunyabusiness9773]

Amazing camera work as well as an amazing project!

[@senthilkumar-yc2ot]

Excellent job

[@onkelnielsson]

Hi Thomas. Absolute Spitzenklasse! Navigare necesse est, vivere non est necesse, fällt mir dazu nur ein. 👍

[@VFlyArtAndDanceStudio]

Thanks for sharing your amazing work and video, I have shared your video with a student and your video helps her to learn about how to make a ship in a bottle, you are so talented and stay awesome

[@agermangineer]

Wow! Thank you! 😊👍🏻

[@michelszvetecz3243]

absolument magnifique un superbe petit chef d'œuvre bravo l'artiste👍👍

[@ThePsychokater]

The boat has no name!

[@agermangineer]

I know… the Christening would have been a bit of a problem…

[@GageisGreat12]

How about SS America

[@PaulGarcia-ii5ns]

That's a beautiful job there Mate. Thanks for the video and inspiration.

[@dragonrose2620]

This is insane .. beautiful

[@agermangineer]

Thank you. 😊

[@javiergonzalo1685]

Maravilloso

[@valtermello]

Wow! Much more than an Amazing work.

[@Dominic_Kim-]

A sailors dream

[@robertsalanon2909]

Beaucoup de travail et de patience ....Bravo !!

[@agermangineer]

Even I understand enough French to say: merci! 😀

[@Dominic_Kim-]

Imagination and science wow

[@fuad33gaming57]

Thank you bro bahut badhiya banae ho

[@cliffjamerson3107]

Cool

[@davefricke2689]

that's coolest ship i ever seen, i 've made quite a few in my day but dam it just was exquisite. thanks for making this video, i'm for sure going to step up add more to my ship making. just plain incredible

[@agermangineer]

Thank you so much. Yes, another project is in the making. This time a ship repair but with an actual working (rotating) lighthouse. So far it’s going well. :-)

[@davefricke2689]

@@agermangineer I'm working on one right now also. That sounds interesting with revolving light house light

[@danielzunino7144]

EXELENTE TRABAJO

[@stars4alam0071]

❤️

[@supremedreamsproductionsti3600]

You have to be abnormally patient to do this

[@panamour4281]

Men, you have a good job. Please, give up ❤

[@simonrisley2177]

I thought the painting wasn't quite as precise as it might have been, but the construction and rigging were outstanding. As was the incredibly complex lighting... Much more ambitious than mine, so far! My own ones I do in sections, so the fo'castle, poop deck of a galleon, etc., have to be put in after the hull (as otherwise the ship won't fit into the bottle) which makes the construction quite fun! My next project is a Roman galley -- so I have oars as well as a mast, bowsprit and sails to think about! (Wish me luck: I'll need it!)

[@agermangineer]

I watched the video just two days ago after a long time and thought the same thing about the paint. But my question is: will you post a video? That would interest me a lot! And I’m sure you’ll do fine! 😃👍🏻 And I’ve just subscribed to your channel.

[@aminablanco9868]

Me gusta y lo estoy haciendo casi igual

[@marcuskrugel6620]

HAMMER!!!

[@sergiobotardo7951]

Um trabalho perfeito , um mestre , merece todos os likes ... Ein perfekter Job , ein Meister , verdient alle Likes ...

[@agermangineer]

Soso… und was schlagen Sie vor? Die Kabel durch den Flaschenhals verlegen? Das wäre bestimmt besser… 😂

[@sergiobotardo7951]

@@agermangineer ja alles wird durch den Engpass erledigt. und der geklebte Rumpf. das ist das Richtige. Ich habe nur meine Meinung geäußert. Dieser Link gibt Ihnen ein Licht, dem Sie folgen können ... kzbin.info/www/bejne/m4XCf6iXbqucabM

[@sergiobotardo7951]

@@agermangineer Grüße aus Brasilien lieber Meister...

[@agermangineer]

@@sergiobotardo7951 ja, aber das ist doch das gleiche wie hier: 27:39 Das Schiff wird durch den Flaschenhals geschoben, die Segel über den Flaschenhals gesetzt und am Ende wird alles abgeschnitten. Nur die Stromkabel kann ich ja nicht anders verlegen. ☺️

[@sergiobotardo7951]

@@agermangineer Verzeihen Sie, ich habe bis zum Ende Ihres Videos nicht aufgepasst, ich hatte unterbrochen, bis Sie die Flasche durchbohrt hatten. jetzt schau dir das Video bis zum Ende an, ich gebe dir allen Grund. Verzeihen Sie mir noch einmal , weil ich meinen Kommentar abgegeben habe , bevor ich das ganze Video angesehen habe ... vielen Dank , dass Sie Ihre wunderbare Arbeit teilen .

[@user-fy7hz9dz9g]

Обалдеть ! Такое придумать - уметь нужно !

[@salbredramatou2147]

EEEEEEEEEEEEEEEE1E1E111eee

[@dunebuggy1286]

Nice. Gave some good ideas. Like the waves hitting the land. What did you use for the slow blinking lighthouse light?

[@agermangineer]

Thanks. I used a micro LED and a wiring tutorial from an Indian guy. I’m in a hurry right now, but the link to the video should be posted.

[@quepasa2781]

Thanks mate, what diameter drill bit are you using?

[@agermangineer]

😀 0:36 1 mm for the wire fittings and 0.5 for almost everything else.

[@djericanthony]

Would be cool for a way to add an intake somehow for fog from a diffuser

[@agermangineer]

Now you tell me!?! I like your thinking!! 😀👍🏻

[@focuspocus5236]

Just wanna ask, what kind of materials did u use for the sails?

[@agermangineer]

Oh that was just an old polyester shopping back with kind of a silky texture. And to form them: clear nail polish. My wife really supports this stuff…

[@krismarie4837]

I would have added some resin to bittom just to secure it down

[@nathanirvine3007]

Please don't use a fence to make a cross cut.

[@andersandre5120]

Echt gelungen und Glückwunsch zu deinen 1000 Abos, könntest du vllt ein 1000 Abo Special Video überlegen und machen🤪

[@agermangineer]

Video nicht unbedingt, aber ich schicke Euch was feines! Versprochen!

[@vipinbhatti]

Can I buy this masterpiece please

[@agermangineer]

Thank you, but it’s not for sale. ☺️

[@tharangaathulgama7535]

What is the name of machine that you are get to chatch the toothpick?

[@agermangineer]

What does to chatch mean?

[@tharangaathulgama7535]

@@agermangineer what is the name of that you are get to catch the toothpic?

[@agermangineer]

@@tharangaathulgama7535 I don’t know. Those tools were made by myself, so I don’t know if they have a specific name….

[@MdDhali506]

is this for salev ? sale?

[@agermangineer]

Nope. Thanx though. 😌

[@johncollins8862]

Where can I get the plan picture at ok ur phone???

[@johncollins8862]

On*

[@agermangineer]

On google: Rickmer Rickmers plan. Should be one of the first images…

[@agermangineer]

Or just: Rickmer-Rickmers.de

[@gonnerhaftesgonnachu3825]

25:46 WTF!!!!🤣🤣🤣😂😂😂😭😭😭

[@agermangineer]

What can I say? It was a cheerful moment… 😌

[@sachaldalai8685]

I need this, i want to buy Sir

[@agermangineer]

That is very flattering! Thank you! But it really is not for sale. Sorry. 😀👍🏻

[@sachaldalai8685]

@@agermangineer okay sir 😔

Waaahnsinn

[@marceloquintanilla4777]

CAPO

[@960wattoffgridrv]

you forgot to add fog to make the lighting more dramatic to the music. you went low budget lol

[@senthilkumar-yc2ot]

Excellent job