Sat fascinated by this video, and a German ship in a bottle by a German engineer nicely built demands a comment in German So, AUSGESEICHNET 👍👍👍
@haresh.r2084Ай бұрын
Can you please tell me bit more about the 12v power pack and where i can get it ?
@MdDhali506Ай бұрын
is this for salev ? sale?
@agermangineerАй бұрын
Nope. Thanx though. 😌
@chanyeowchuan8298Ай бұрын
Impressive diy housing for the endoscope camera……… Can u share what’s the materials and items used to make the endoscope waterproof housing show in 2:34?
@renewable8051Ай бұрын
Excuse me Sir, can i ask how u connect the wire from camera to mini pc or antenna?
@renewable8051Ай бұрын
I have a project autonomous ROV, but i confuse how to connect the wire from action camera to mini pc.
@agermangineerАй бұрын
@@renewable8051 you have to get a fixed system. An underwater camera with cable. Or - if available - a waterproof and pressure tight case to allow an auxiliary cable to be connected to your camera. The plug into pc or an above-water transmitter is a matter of software which has to be compatible with the camera system.
@karenmusa3052Ай бұрын
Just came across your page. Wow totally amazing, patience and working fingers help lol Just beautiful, thanku for the great tutorial..😊
@tolstoi_vitalys1988Ай бұрын
Очень круто!!!!я учюсь потихоньку ,но плохо паруса еще получается!
@Rabauke2.0Ай бұрын
Super Video. Vielen Dank dafür. Bezüglich der Dachaussteifung: kann man auf die Windrispenbänder verzichten, wenn man das Dach mit OSB Platten vollflächig verschraubt?
@agermangineerАй бұрын
Ja das geht: im Idealfall so, dass möglichst alle Stöße auf den Sparren liegen um mind. alle 20 cm eine Schraube verbaut wird.
@Rabauke2.0Ай бұрын
@@agermangineer Danke für deine Antwort.
@DhanyShadowSport2 ай бұрын
May I know the type of you camera for underwater? 🙏🙏🙏
@agermangineer2 ай бұрын
Sure: the Eken h9r action cam and the EYOYO fishing cam with 30 m cable.
@TreasureByMeasure2 ай бұрын
I really like your lighting setup! Is it possible to integrate an HD 360 camera to your rig and grappling arm?
@agermangineer2 ай бұрын
Everything is possible. But be aware of the weight and balance. No to mention the limited space on the frame.
@panamour42812 ай бұрын
Men, you have a good job. Please, give up ❤
@ronnyherrmann15283 ай бұрын
Echt super erklärt! Dickes Dankeschön
@supremedreamsproductionsti36003 ай бұрын
You have to be abnormally patient to do this
@nunyabusiness97733 ай бұрын
Amazing camera work as well as an amazing project!
@Jeffreyrbrady3 ай бұрын
I'm impressed by the control box!
@agermangineer3 ай бұрын
Thanx. Be sure to check out my controller box videos. 🤓
@TheTobbeman374 ай бұрын
building my own ROV atm inspired by yours alot! im about 70% done so far.
@agermangineer4 ай бұрын
Keep me informed!
@simonrisley21774 ай бұрын
I thought the painting wasn't quite as precise as it might have been, but the construction and rigging were outstanding. As was the incredibly complex lighting... Much more ambitious than mine, so far! My own ones I do in sections, so the fo'castle, poop deck of a galleon, etc., have to be put in after the hull (as otherwise the ship won't fit into the bottle) which makes the construction quite fun! My next project is a Roman galley -- so I have oars as well as a mast, bowsprit and sails to think about! (Wish me luck: I'll need it!)
@agermangineer4 ай бұрын
I watched the video just two days ago after a long time and thought the same thing about the paint. But my question is: will you post a video? That would interest me a lot! And I’m sure you’ll do fine! 😃👍🏻 And I’ve just subscribed to your channel.
@hooniiic4 ай бұрын
❤❤❤자작 드론
@trsr24 ай бұрын
Moin. Super erklärt... Vielen Dank!
@alfredoduraningenieroscons605 ай бұрын
Hello. Excellent video. I have a question for you... How can I configure my Meade tripod considering that my city is located at 10° North latitude? Thanks in advance. Greetings !
@PaulGarcia-ii5ns5 ай бұрын
That's a beautiful job there Mate. Thanks for the video and inspiration.
@livquitain18735 ай бұрын
Fantastic ❤🎉
5 ай бұрын
Waaahnsinn
@alb33065 ай бұрын
rechne ich das mit Stahlträgern statt Holz genauso ?
@agermangineer5 ай бұрын
Hervorragende Frage, die schon öfters aufgekommen ist. Nein, auf keinen Fall. Beim Stahl gibt es ein ganz großes Problem, was nicht so einfach zu lösen/berechnen ist: Biegedrillknickversagen. (Ewig langes Wort; auf Englisch einfach: „buckling“) Der einfache Biegeknicknachweis (wie hier im Video) wird beim Stahl natürlich genauso geführt, wie beim Holz (max. Moment geteilt durch das Widerstandsmomet). Bei sehr leichten Konstruktionen wo man für die reine Tragfähigkeit mit einem sehr schmalen (billigen) Stahlträger auskäme, ist das maßgebende Problem die Schlankheit. Und das wiederum führt zu einem deutlich stärkerem Träger oder zu zusätzlichen Einbauten, welche das Biegedrillen verhindern. Kurz und knapp: es ist einfach zu komplex und aufwändig, um es in ein 20 Minuten KZbin ausreichend zu behandeln. Hoffe das hilft weiter. 😀🙋🏼♂️
@alb33065 ай бұрын
@@agermangineer schade , denn wir gehen davon aus das wir ein Carport Konstruieren sollen in unserer Meisterprüfung. Da wir das nie hatten wäre es cool gewesen es irgendwo erklärt zu bekommen 😅 trotzdem danke
@dunebuggy12866 ай бұрын
Nice. Gave some good ideas. Like the waves hitting the land. What did you use for the slow blinking lighthouse light?
@agermangineer6 ай бұрын
Thanks. I used a micro LED and a wiring tutorial from an Indian guy. I’m in a hurry right now, but the link to the video should be posted.
@mistigiles10917 ай бұрын
Your cool af
@TheTobbeman377 ай бұрын
i have tryed make ur ROV, but i dont manage to get the wiring to work. could i get some feedback perhapps =) ? from you or anyone els aswell! thx
@DB.Schraubergott7 ай бұрын
Super Danke
@djericanthony7 ай бұрын
Would be cool for a way to add an intake somehow for fog from a diffuser
@agermangineer7 ай бұрын
Now you tell me!?! I like your thinking!! 😀👍🏻
@valtermello8 ай бұрын
Wow! Much more than an Amazing work.
@tomglasauer9 ай бұрын
Echt Klasse erklärt, auch für Laien wie mich. Wir planen gerade unseren Carport und möchten dem Statiker dann gerne unsere Rechnung zeigen. Mal sehen, ob wir das mit deiner Hilfe richtig machen. Nur eine Frage: Wir möchten auf dem Dach eine extensive Begrünung. Deren Gewicht wird mit bis zu 150 kg/m² angegeben. Ab Minute 9 sagst du, das Gewicht der Begrünung muss bei der Ermittlung des Gewichts addiert werden. Du addierst aber kg/m und ich habe das Gewicht der Begrünung in kb/m². Ich berechne das dann so wie die Dachhaut, also geteilt durch den Trägerabstand, korrekt? Also ~ 120 kg / m ...
@agermangineer9 ай бұрын
Absolut richtig, nur nicht geteilt durch den Abstand sondern mal. Aber ich sehe, dass Ihr das richtig gemacht habt: 1,5 kN / m^2 x 0,8 m = 1,20 kN/m. 😀👍🏻
@tomglasauer9 ай бұрын
@@agermangineer Ja, klar, falsch aufgeschrieben :-) Danke für die Korrektur. Wir haben nun mit der Dachbegrünung einen Wert von 2,85 kN / cm berechnet, was über die 1,66 kN / cm für Nadelholz rausgeht. D.h. wir wählen nun die Balkenstärke, -abstände, Maße und Auflage der Begrünung so, dass das passt. Wenn wir nun kein Nadelholz nehmen, wo finde ich die S10 C24 Werte anderer Holzarten?
@agermangineer9 ай бұрын
@@tomglasauerden rechnerischen Widerstandswert von Holz zu bestimmen ist kompliziert. Deshalb hab ich das bewusst pauschal gemacht, damit das Video unter 1 Stunde bleibt. Es stimmt zwar, dass es bessere Holzarten gibt, aber ich wüsste gar nicht wo ich die herholen sollte, weil im Bauwesen grundsätzlich C24 verwendet wird. Von daher: besser die Konstruktion verstärken. Allgemein ist Laubholz natürlich stabiler. Aber auch hier gibt es Unterschiede - das bedeutet, dass Eiche mit D24 mit C24 Nadelholz gleichzusetzen ist. Sollte man aber tatsächlich Laubholz mit D30 (mit entsprechendem Zertifikat) bekommen, kann man grundsätzlich den hier genannten Widerstand um ca. 20% erhöhen. 😉 Also… machbar schon, aber wissen was zu beachten ist.
@tomglasauer9 ай бұрын
@@agermangineer Verstanden. Also verstärken. Danke 🙂 Nach meinem Verständnis macht die Verstärkung in der Höhe der Träger am meisten Sinn, oder? Mit Dachbegrünung würde zumindest der Wert von 1,66 nie erreicht. Bei einer Erhöhung der Breite x Höhe auf 10 cm x 24 cm passt das.
@agermangineer9 ай бұрын
@@tomglasauer 100% korrekt
@RubaSon9 ай бұрын
Hallo ist zwar schon älter das Video aber ich hätte eine Frage zu der Endoscopekamera. Die ist doch mit USB oder? Wie funktioniert das mit dem langen Kabel?
@agermangineer9 ай бұрын
Yep, entweder direkt an einen PC oder per Handy über den WLAN Transceiver. Ganz simple Technik
@aminablanco98689 ай бұрын
Me gusta y lo estoy haciendo casi igual
@MGM_Aquatics9 ай бұрын
This is absolutely amazing! This design has so much potential! Your ingenuity in this project had so much attention to detail and I'm thinking of trying this myself to recover a lost camera from the bottom of the ocean.
@day43079 ай бұрын
What sizes were the metal mountings you used to mount the motor housings to the frame?
@agermangineer9 ай бұрын
2 cm inner diameter. Same as the frame. The flanges are as big as they come…
@imacoid10 ай бұрын
great project, i wonder what if you just install the bilgepump (not reassembly by other propeller). Will the thrust just same or weaker or maybe stronger?
@agermangineer10 ай бұрын
Inside the pump is just a little pelton turbine. Meaning you have very little thrust: forward you have water exiting a hole and reverse… suction into a hole - no thrust and a bit of thrust through the pump intake… going into a different direction. So: I wouldn’t recommend it. 😀🙋🏼♂️
@imacoid10 ай бұрын
oh i see@@agermangineer , i want to make sea scooter. Is it recommended use this type of bilge pump for cheap and simple project? maybe need more than two of them 😁
@agermangineer10 ай бұрын
@@imacoid well, if you use one for each direction (forward only) and if you have a good power supply with a short tether you will be able to operate it. A colleague of mine did that to steer a small buoy.
@imacoid10 ай бұрын
i love to hear it@@agermangineer , what do you mean by good power? it is possible to use more than 12v? and good tather mean change the cable to the bigger diameter i guess. Sorry if you hard to understand my english, i'm Indonesian
@agermangineer10 ай бұрын
@@imacoid no 12 volt is correct. The question is, can the power source handle several Amperes? And yes, a good cable is not too thin.
@tomyracing7810 ай бұрын
Está genial el ROV, ¿estos submarinos tienen tanques de lastre?saludos.
@marcuskrugel662010 ай бұрын
HAMMER!!!
@ireneh132410 ай бұрын
Hallo, tolles Video! Könntest Du vielleicht auch so ein Video machen wenn es sich um ein Stahl-Carport handelt? Wäre es nice..
@agermangineer10 ай бұрын
Die Sache hat einen Haken: Stahl hat eine Form des Versagens, welche man nicht mal eben so mit ein paar einfachen Faustformeln berechnen kann. Von daher eignet sich das nicht für ein DIY Heimwerker-Video. Sorry.
@ireneh132410 ай бұрын
Danke für die schnelle Antwort. @@agermangineer
@pauljd266410 ай бұрын
Your video is so soothing and relaxing. Nicely made. Thank you
@agermangineer10 ай бұрын
That is highly appreciated!
@guitarstring598111 ай бұрын
Hello, where I can find schematics to mount the tubes? I have already all cutted, now I have to join it. Thanks, best regards
@schraj237011 ай бұрын
How many amps is your battery your using?
@sirmoritz12211 ай бұрын
Ist das bei dir auch so das, die Motoren anfangen zu vibrieren, wenn sich die Propeller drehen?
@agermangineer11 ай бұрын
Also eigentlich nicht.
@sirmoritz12211 ай бұрын
@@agermangineer Hab das Problem gelöst, des lag daran, dass der Abstand zwischen Motor und Propeller zu groß war
However, they are indeed quite massive. Smaller ones also do the trick. Unless you specifically want the visible technology - like I do. In case the link doesn’t work, search for: 12V DC Coil Power Relay LY2NJ DPDT 8 Pin HH62P JQX-13F With Socket Base
@lauraregelous3577 Жыл бұрын
Thanks for the reply 😁
@nicker3115 Жыл бұрын
Hello! Does these engines support reverse trust? if so how can you make it? If no how can the submarine go back up or down?
@agermangineer Жыл бұрын
Just watch from 3:07 or check out my other videos. Switch the polarity of the cables and you have forward and backward motion.
@nicker3115 Жыл бұрын
@@agermangineer Thanks!
@nicker3115 Жыл бұрын
@@agermangineer Do you think if i go 7 or 8 meters deep in water these pumps will hold the pressure? or theyll break?
@agermangineer Жыл бұрын
@@nicker3115 I’ve had them 15 m deep. No problems down there.
@sirmoritz122 Жыл бұрын
Und welche Propeller nutzt du
@agermangineer Жыл бұрын
Robbe Racer rechts 62,5 mm M4 Oder Graupner…
@sirmoritz122 Жыл бұрын
@@agermangineer Macht des einen Unterschied, ob ich links laufend oder rechts laufend nehme?
@agermangineer Жыл бұрын
@@sirmoritz122 nö… musst nur richtig polen. Hätte ich damals links UND rechts kriegen können, hätte ich je 1 genommen.
@sirmoritz122 Жыл бұрын
@@agermangineer Du meinst am linken Motor einen rechtsdrehenden und am rechten Motor einen linksdrehenden, damit sich der Radeffekt aufhebt?
@agermangineer Жыл бұрын
@@sirmoritz122 ja, aber nur aus „optischen“ Gründen. Viel Radeffekt oder Torque hat das Ding nicht
@sirmoritz122 Жыл бұрын
Kann man die Geschwindigkeit der Motoren regeln?
@agermangineer Жыл бұрын
Yep - über einen Spannungsregler
@user-ft4jb1do5w Жыл бұрын
how much did this cost in total?
@agermangineer Жыл бұрын
Good question… I build these things with leftovers and by means of recycling. But I’d say with 300 bucks you’re in the clear.