Shooting Suppressors Wet

[@youtubekeepsshadowbannin-ym4go]

Bros within the first 30secs i see two dude with mustaches talkin about Vaseline lube

[@jkarmamentsuppressors]

lol

[@jasonparker3173]

The JK 195 SGX 12 will be my next can. Thanks

[@jkarmamentsuppressors]

It's a great can! Let us know If you have any questions.

[@jasonparker3173]

@@jkarmamentsuppressors 10-4, I appreciate that!

[@thbrtmn]

My .22 can has a mono core. After so many rounds its hard to separate the outer and the core. Then there is a lot of lead and carbon fouling inside...wish I knew this back when I got it. Makes so much more sense for cleaning.

[@jkarmamentsuppressors]

yeah .22 needs cleaning pretty often.

[@shanepitzer4323]

Very exciting discussion. Monotone much? Lol. Good info. Just playing.

[@TheKunsky]

Thanks man! I know, I will try better next time. 🤣😎

[@specialydobon]

What's the verdict on subsonic 300blk out of a 10.5" barrel with a JK 155 VersaX 45? Okay to go wet since it's subsonic or is it a risk?

[@jkarmamentsuppressors]

We would recommend running that combo dry. Pistol, rimfire and shotguns are the only hosts that we recommend using in a wet configuration. Since the Versax45 will be over bored for .30cal use we would also recommend adding a .30cal end cap to your set up for added sound suppression. (just make sure you swap it back to the .45cal end cap if you plan to use the suppressor on a larger caliber host.)

[@JPEBeard]

Do you suggest shooting 22lr wet? Does that help with cleaning?

[@jkarmamentsuppressors]

It isnt needed. but it defnitely helps with keeping it clean. .22 is dirty and most 22 cans need cleaning every 500 rounds or so.. so some vaseline allows in there allows you to just wipe the carbon off when its ready to be cleaned. instead of scrubbing and using some sort of cleaner.

[@StraightToTheBoots]

How often would you recommend reapplying the vaseline again? After each mag? After a couple 100 rds?

[@jkarmamentsuppressors]

There are a lot of variables that affect how long it lasts, like caliber and barrel length and more. You'll know when it's time to reapply as you'll be able to hear the difference fairly clearly. Once the ablative is gone it'll hop up a few dB. It isn't mandatory, of course, but it helps make a suppressor as quiet as it can possibly be. We also like ultrasound gel as it works super well and it evaporates really cleanly without leaving any residue behind and it's really easy to clean up off your skin and other stuff as well. Doesn't last as long as vaseline but it works great and it's clean: amzn.to/3Gtm2WI

[@TheKunsky]

On shotgun we are seeing around 50 rounds before we need to reapply. On 9mm it is closer to the 10-15 rounds.

[@breakthechains8362]

Has anyone tried a high heat axle or bearing grease?

[@jkarmamentsuppressors]

we havent. wire pulling gel, and ultra sound gel work great too

[@mike-zt8uc]

i have used bearing grease it burns up after a range use....it helps in cleaning softens the build up....i believe that bearing grease is designed to handle high temperatures so that is why i use bearing grease

[@MephobiaYT]

69 upvotes.... noice.

[@jkarmamentsuppressors]

hahah!

[@raydelfa1125]

Never add Vaseline,

[@JKArmamentUSA]

It has so many applications.

[@TheKunsky]

It is a great option in special purpose applications. Wet cans have been used for years, this is not a new concept. Happy hunting. 🇺🇸