Shop Truck Gets Spray Painted With Krylon Paint - Custom Mazda B2200 Stanced Mini Truck

[@ericlewis5035]

Looks good for a rattle can job. I've painted my previous cars with rattle cans. I've painted my 97 gtp with a gun (candy red) turned out bumpy-orange peel. I absolutely LOVE PAINTING cars,parts etc.

[@BeardedPandaProductions]

Right!!??... he's all rattle can pro. He use to "legally" tag back in the day. Lol

[@ericlewis5035]

I LOVE painting with spray cans. I painted my 03 Chevy Monte carlo Black with Duplicolor Clear effects (can) by far my favorite paint job. It's on my Instagram page @junkgtp

[@BeardedPandaProductions]

@@ericlewis5035 I'll check it out bro man. I'm sure it looks freaking awesome.

[@kevinrayburn3686]

Dude, this thing is sick af! I just bought a 2300 and am looking to do the same kind of build. I'm gonna rattle can for sure but there's no way it will look clean as yours lol. Love the channel guys. Keep it up!

[@durango8882]

Nice

[@mustangfuego]

loving the truck I am not a fender flare person myself unless you color match them to make it look like it was originally created that way but keep up the great work. You guys are humble looks like a cool crew to hang with. can't wait to see the next vid.

[@orbitwankenovi1463]

Love iT!!!!!!!

[@BeardedPandaProductions]

Next phase is race tires and lots of aero

[@teilyrmagnum5524]

How many cans of spray paint did you guys use? I got an ext cab in about to paint.

[@BeardedPandaProductions]

That one took a total of 7. Since it was a light color, it needed 3 coats

[@Based228]

What's the name of the color? i know it's krylon but i can't figure out the color and it looks super sick.

[@BeardedPandaProductions]

You know what? At first I didn't think I'd like it... but once the truck was sprayed, I fell in love with it. It's Krylon pistachio - in satin. Walmart use to sell it, but now I had a hard time finding it. I wanted to do a touch up recently. Searched everywhere and found it at a True-Value store.

[@freshram192]

Question for you...... I have a 1986 dodge ram 50 (mitsubishi mighty max) picked up some wheels, 15x8.5 and 15x10. Should I use the with the staggered size or get the same size for front and rear?

[@BeardedPandaProductions]

I would keep the staggered size. I'm a firm believer in staggered. Do you know what the offsets are?

[@freshram192]

@@BeardedPandaProductions thank you for you reply. On the 15x8.5 the lip is about 3.5 inches and the 15x10 lip is about 5 inches

[@ericlewis5035]

Now you need some fender flares on the truck😍 looks good guy's

[@BeardedPandaProductions]

That's what I'm saying... I keep pushing Gabe to let me go wild on it.

[@scottlee4244]

yu guyz are the best

[@BeardedPandaProductions]

Thank you man. 😁 There's more to come very soon for this b2200. Super stoked

[@Stinky0182]

Love the black accents! Looks sick!

[@antoniocc353]

Muy bonita camioneta 👍

[@RFJersey]

Should have installed 4x4 fenders and bed before painting.

[@matthoffmann3289]

What type of wheels and tires are those? How do they get them to look that way?

[@BeardedPandaProductions]

They're a 15x10 Bart steel wheel on 195/45 Proxy tires. You have to find a tire shop that's willing to stretch them. It's a huge stretch. I believe the install at the tire shop is on the first truck video that's on my channel.

[@xxobeyxx5552]

You think those rims will look good on a Isuzu hombre 1996 ?

[@BeardedPandaProductions]

I think so. They're similar in design. Do it hombre!!.

[@williamgreen9196]

what grade of sand paper did u use for the taking off of the paint

[@BeardedPandaProductions]

We used a 220 grit on the rotary sander to smoothen out the primer. We didn't remove any paint.

[@BeardedPandaProductions]

We got a hold of it with all the bodywork and primer already on it. 220 will smoothen it out as well as removing paint without putting any swirls.

[@tannerhederson4067]

What brand of paint did u use

[@efraindelariva9368]

Wow i got the same truck where can i oder the wheels for that same truck and where can i buy the 🐼 stickers?

[@BeardedPandaProductions]

These wheels were picked up off ebay. They're Bart Racing wheels. 15x10. 😎 The stickers will be posted on our website by this weekend. Beardedpandafab.com

[@derekbeglinger723]

What's the name of those rims bro and were do u order them

[@BeardedPandaProductions]

They're a 15x10 Bart steel wheel on 195/45 Proxy tires. Found them on eBay.

[@treyharris6020]

Where u got your rims

[@BeardedPandaProductions]

You can pick some up at Summit Racing or eBay.

[@NightMarEstaRv714]

Dang that looks sick

[@BeardedPandaProductions]

Thanks broski. We should be putting out a video soon on the full breakdown and how much we've spent up to this point.

[@NightMarEstaRv714]

@@BeardedPandaProductions looking forward to it

[@bobbymiller8705]

Clean 👍👍

[@fabe707]

Good job, keep up the truck vids!

[@BeardedPandaProductions]

I'll be recording more on the truck this coming up week 👍🏻

[@phillillibridge5229]

I may have missed it, but what are the tire/rim size yall running? 195/50/15?

[@BeardedPandaProductions]

They're 15x10 on a 195/45 tire.

[@miataganggarage4680]

Looks dope

[@BeardedPandaProductions]

Thanks broski. More work coming soon.

[@1juan167]

What size are those and tired

[@BeardedPandaProductions]

They're 15x10 -38.10 back spacing with Toyo Proxies 195/45. Just need to find a tire shop that's willing to stretch them.

[@becerroduvi5015]

Nice mini truck bro what side are your wheels

[@BeardedPandaProductions]

They're 15x10 on a 195/45 tire.

[@becerroduvi5015]

Okay thanks bro

[@Lex_below]

Where can I get the rear bumper for my 1997 B4000?

[@BeardedPandaProductions]

That's a tough one man. They're hard to come by these days. Best bet is a junk yard

[@Lex_below]

@@BeardedPandaProductions thanks for the reply. It's so hard finding aftermarket parts on old B series. Love your vids. Keep it up.

[@captainarsenio3880]

Whaf rims do you have in the truck

[@BeardedPandaProductions]

They're 15x10 Bart Wheels. With a 4" back spacing.

[@danielsandozequi7295]

what kind of paint cans did you guys use ? i have the same truck , how can i prepare my truck for paint?

[@BeardedPandaProductions]

We actually used Krylon Colormaster. Prepping: prep the body as far as dents and rust. Primer (this one already had 2 coats of primer on it when purchased). We used an orbital sander starting with a 220 grit. Wipe down with paint prep. Painting: getting a super smooth, non-streak finish... takes some painting skills. Basically try your best to lay each pass of paint slightly on top of each other to reduce over spray and streak marks. If done properly, there will be no need for wet sanding nor clear coat. We like to use a satin finish. It's easier to lay, gives a really nice finish, and has the flat effect without the dry look, and reduces streaks

[@dj2dope820]

How many inches is it lowered?

[@BeardedPandaProductions]

It has a 3" drop block on the rear and torsion bars cranked all the way down in the front with a reverse lower control arm plate.

[@michaelwilliam7654]

Sickkk where did you get the front and rear clear running lights??

[@BeardedPandaProductions]

Found them on eBay. A seller from another country. They fit and look great

[@norbertoortega6839]

How many cans used

[@BeardedPandaProductions]

If I remember correctly, it was 7 to 10 cans. Some were the tall ones, some were standard sized cans.

[@juanortiz6835]

Buen proyecto

[@travismoon5290]

We have these with v6's in South africa

[@BeardedPandaProductions]

That would be so cool if they came in V6's here

[@LitoLuna99]

What's the year and model ?

[@BeardedPandaProductions]

It's a 93 Mazda b2200 single cab

[@CatsOrangeAndGrey]

You have 666 subscribers 😨 😇. Good job!

[@BeardedPandaProductions]

Lol. I know!!.... we need to hurry and add more subscribers. 😂🤣😂 thanks.

[@importdose869]

Wow amazing job with the spray can guys.... Do you guys have a Facebook? To communicate......

[@BeardedPandaProductions]

Sure do man. 😀 facebook.com/beardedpandaproductions Instagram: bearded_panda_fab_jason

[@phantom_cutfilm2ss]

What size wheels and tires are those? I got a 89 b2200 but I'm trying to find those kind of wheels and fitment

[@BeardedPandaProductions]

They're Bart Wheels 15x10 with Toyo Proxes 195/45/15

[@phantom_cutfilm2ss]

@@BeardedPandaProductions thank you!

[@BeardedPandaProductions]

What are your plans for the b22? 😁

[@phantom_cutfilm2ss]

@@BeardedPandaProductions right now just trying to put some new shoes to change the look of the truck. Recently painted the front grill ,mirrors, and plastic things on the window gloss black. It changed the look 😎👍

[@BeardedPandaProductions]

@@phantom_cutfilm2ss crazy how little touch ups like paint make such a dramatic difference.

[@jasonbarrios2229]

What you’re tire specs? 195 45?

[@BeardedPandaProductions]

Yes sir. They're a nicely stretched 195/45 15 😎

[@artsautocare3826]

Jason Barrios what those wheels called

[@BeardedPandaProductions]

15's

[@k_scamander_riddle]

Esta chida yo quiero una asi

[@unseenhero7498]

why didnt you show how he painted from the start not just one small piece looks suspicious

[@BeardedPandaProductions]

Lol. I can understand that. We show him paint at 5:20 but the main reason is that we show how to rattle can large body pieces when Gabe painted his civic front bumper. We explain techniques, paints, and best methods to go with.

[@unseenhero7498]

Bearded Panda Fab I’m not trying to be I’m not. Trying to be a an ass I’m just wondering why you didn’t show the whole procedure or at least a good chunk of it I’ll check out the other videos I’m only asking because I’m trying to spray can my van

[@BeardedPandaProductions]

@@unseenhero7498 Good point. I'll definitely keep that in mind for the next spray paint video. We paint often. Using satin paint is the best route to go. The likelihood of getting spray lines is reduced. If you want to have a clear finish, it's better to spray clear over a flat or satin. Let me know if you have any questions that I can try to help with

[@CarlosCaterpillar2004]

Over spray 😞

[@BeardedPandaProductions]

We didn't have any over spray lines. As long as you lay it wet and run 50% over lay stream, it'll turn out smooth. After it dries you can wipe it with a rag and soap and water or prep sol if needed in areas. We just used soap and water.

[@tannerhederson4067]

What brand of paint did u use

[@BeardedPandaProductions]

Krylon indoor/outdoor satin spray paint