Plasma TV Main Board Repair Overview - TV Has Audio but No Video - Symptoms of a Bad Main Board

[@shopjimmy]

Thanks for watching our TV repair video! Due to KZbin policy changes, we are no longer answering tech support questions in the comments section or on the phone. We apologize for the inconvenience. If you need additional tech support, please visit FixYa.com or contact your local TV repair shop. Good luck and let's fix your TV today!

[@MoonChildMedia]

youtube sucks

[@thomasjaworski5279]

Thanks for your help Shop Jimmy, I was thinking it might be the 'main board' too. I will look at your website for the link you sent for a replacement part. I appreciate your time.

[@michaellittle9345]

Hello, I just got a Westinghouse LTV 32w3 HD from a friend. He broke the antenna connector (coax) off of the back. I tried to connect a DVD player up to it through the RCA jacks but it shows no signal message. If I put the TV input to air it shows snow. Could this be the main board? I tested the dvd player on another tv and it works fine. Thanks

[@StefanosBand]

Congratulations for your Helpful videos! I have the PANASONIC TH37PX80E and in all SCART (AV1,AV2,AV3) i have no video signal I see all option of the TV in the screen and I have noise sound from the scart cable. I have not check the HDMI ports yet . It could be the main board in the Video input section? What you think that I have to look? Any special part to measure or change? Thanks in advance and have a great day!

[@bud194751]

I have a Vizio VP50HDTV10A that seems to have a bad DTV input. All the other inputs work perfectly, but if the input is set to DTV the set will sometimes come on, sometimes shows a 'no signal' message. I can switch to any other input and it comes right on. After it's on awhile I can switch back to DTV input and sometimes it comes on, sometimes not. Do you think it could be the video box panel assembly and tuner?

[@Escorpio40]

People, don't hold your breath waiting for a reply from ShopJimmy.

[@shopjimmy]

@michael Little - It appears as though the DVD player is in progressive mode for a 5 wire component connection on the DVD player/TV. That can be changed on the DVD player. I would however recommend replacing the main board on your TV to fix the coax connection. Please call our customer service for help with purchasing the correct main board. [phone] Thanks and please let us know if you have any further questions!

[@shopjimmy]

@Jeremy Easley - This could be the main board or also be the panel that is causing this problem, the panel is very expensive and often difficult to replace so I would recommend replacing the main board in your TV, to see if that helps. You can search your main board part number on our website, shopjimmy com to find a replacement. You can also call our customer service for help with your purchase! [phone] Thanks!

[@parbjotkhela3072]

+ Garry Gemmell would you know we're I can gets this part and if so can you give me the link

[@greenlantern1174]

Hello Jimmy been having problems with my LG plasma TV model 50 pn 6500. Sometime ago the remote stopped controlling the TV iknow the remote is working. It works on my other LG televisions. But lately I will turn on the TV and it seems after it warms up it shuts itself off. Then after a while it will come back on any thoughts thank you

[@alejandromartinez-zw4hs]

The same problema but with an 19 inch lcd Toshiba model LE19s304A , it displays the menus, channel, and inputs correctly but shows no video and no audio, i have suspect of the mainboard, what do u think THANKS

[@jamesduwar1760]

I have a TC-p50g25 and 4 blinks and it’s made by Panasonic. I replaced the SOS board and it’s still giving me four blinks. what would you recommend!

[@shocknaweent]

I have a 60" Samsung plasma model #pn60e530a3f. I have no backlight/picture but the sound works. What do you think my problem is? Nothing looks visibly damaged. If you could be of assistance that would be great!

[@kirkfaulks3272]

Hi.. i have a tcl model # 75S421. When i plug it in it goes to like a dark blue image no picture at all but not neccesarily black screen. I do have sound. When i pulled the back cover off from what i saw every led harness light seemed to be working. Any pointers on what to do or whats going on would be greatly appreciated!

[@RescueMoversDFW]

Hi, I have a Plasma Samsung TV PN50A510P3F, when i turn it on everything it works good but after couples minutes starting show red-pink sparkles slowly until the covers the screen and the goes dark. If i turn it of-on still doing the same. I already tried all inputs and without them , also i looked for any bad caps and everything looks ok. Please help! Thanks

[@shopjimmy]

Daniel Martinez I recommend replacing the Y-Main Board and Scan Drive boards that attach to the Y-Main Board. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=PN50A510P3F Be sure to match part numbers on your current board, with your replacement for compatibility. You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@RescueMoversDFW]

Thank you very much for your advise. I fixed the problem by replacing the Y-Main Board and Buffers.

[@bdkane721]

I have a Pioneer PDP-4280HD that has no display on screen and no audio. Our cable boxes all work for other tvs in house and the cables are all in excellent condition. The tv gave the message "plasma tv is starting...please wait" the first time and now I don't see that anymore. Is this a main board issue? Can it be replaced on a tv that's about 10 years old like this one?

[@rusam689]

HI , I have a 40 inch NEC plasma, Model PDP42V74413, Lost video while watching, But can hear audio from the input source. Can you help fix this problem. Did take out the back cover and checked the fuse in the Y - sus and Zsus boards. both are OK.

[@macfreestyle]

I have a LG 60PV450 when powered on it clicks and get the red stand by when I hit the power button or sounds like it’s trying to turn on then the power light in the front fades and cycles to power on again. I don’t have picture or sound. Voltages present to x and y boards and to the main board. Do you think this is a main board or power supply or panel issue.

[@ajjenga4316]

Hi. I have a panasonic plasma. Model number th-50pz85u. The TV gets power it seems. I hear an initial click. The red led though just stays red...no blinking. The remote will not turn off the TV and nothing shows on the screen when I use "menu" or any other functions. Ideas?

[@zebra100300]

Hi. I have an old plasma 60 inch tv with brand of Atner which I bought at Vegas CES show I believe is a copycat of LG. When turned on. it starts with flickering "no signal" sign in middle of sceen. It can be solved by hair dryer blowing into the middle circuit board then by a light click sound and the "no signal" sceen become solid and swtich itself into input singal and everything will be fine. I checked the board. didn't see any bulge capacitors there. So could you please figure out which part is most likely have the problem and how to fix it? You help in this respect will be much appreciated.

[@mylton14]

Hey my tv keeps turning on and off and some times not at all. Im thinking main board. What do you think? 1 UN60H6350AF

[@charliebrownsting]

LG 60PB4DT. One HDMI dropped out after a lightning storm. The other worked intermittently until recently and now it does not. All other inputs are functioning. I understand I need to replace the main board, but I'm having trouble finding one. I don't see the board listed on your website (all I see is the main logic board). Any ideas?

[@manotvmanotv9470]

Hi. i have a question. Panasonic TX-P50UT50B Serial FA 2230513 losing control. Changing AV or HDMI automaticly, changing valume and some another settings. Remote controler stoping works. Any idea whats going on? Ty

[@terbencas]

I have a panasonic plasma no picture and volume are working do I just replace the board?

[@ozzzy41]

Hi, I have Hitachi 42HDS69 plasma manufactured in 2006, and I'm getting vertical lines about 2 inches in width, red , black and multicolor , i get one or 2 at the time, I still watch tv but sometimes it just shots off, maybe you can give an idea what can be the issue, thanks.

[@cleonedwards5197]

Hey shop JimmyI have a 32ld340-ta lg TV it has video but no audio do u known the problem .the speakers are good. I try unplug the power 2min but still no sound

[@Shade2black]

I have a Tcp46c2 that need a mainboard and a power supply board. To get it repaired is too costly. How complicated will it be to buy the parts and do it myself.

[@shopjimmy]

Kevin-Shawn Talbot Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=Tcp46c2 Be sure to match part numbers on your current board, with your replacement for compatibility. You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@lindseyroark1401]

We have a LG 55UJ6200 55” inch tv and it just went black and we still have sound. What do we need to do in order to fix it? Thanks for your help!

[@Jerdejong14]

Hello, Samsung plasma PN60F5300AFXZA sound but no picture. As soon as the power cord is plugged in, the standby light flashes 3 times, then slowly 9 times, then 4 times, then stays off. I can hear sound from a dvd player but the screen is pitch black. Pushing the power button does nothing, but the volume still works. The tv stays on unless the cord is unplugged. The green led on the main board flashes once about every 4 seconds. Upon testing the power supply and main board, I get the low voltage pins to test ok but I'm not getting any high voltage at the sustain boards. I've already tried a different power supply but I get the same issue. Not sure if I should start throwing more boards at it or if there's more testing that can single out the issue. Also, I've tried disconnecting everything from the main board and power supply but no changes. Since the power button doesn't seem to work, should I start with a main board? Also, I didn't noticed any burned spots or bad caps.

[@aramtoutikian3751]

I have a Samsung model pn51d450a2d serial # z2z13cqb344216r. The other day the screen decided to go black but had audio. I checked connections all were good. I tried unplugging and starting back up and no picture only audio. Wondering what part can be the issue so I can order one and replace it.? Thank you

[@JoseRivera-mu4cn]

Jimmy do you have any main boards in stock for samsung pn64f8500afxz, part bn94-06205c? plasma tv is powering off and on. could it also be control board or logic unit?

[@greekcs]

+Jose Rivera I have a similar problem with mine. I removed the back cover and noticed a blown chip on the main board. Now trying to find one.

[@bmichael9303]

greekcs .. I'm having the same problem ,did you get yours fixed.. did fixing the blown chip fix this problem..

[@djchas8707]

samsung pn51d550 replaced the power board and the logic main board and got sound but no picture and it takes a long time for it to come. i was wondering on the logic main board does that green light supposed to be blinking because i purchase a new one and that light doesnt come on. could that be a bad board?

[@shopjimmy]

Dj Chas A picture problem typically means you need to replace the Y-Main Board and the bottom Y-Scan Drive board. Yes, the logic board needs to blink. If you need to replace any boards, here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/index/?cat=4&q=pn51d550 Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: Samsung Plasma TV Repair: Samsung Plasma Panel Parts Guide You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@MoonChildMedia]

LG 42PA4500. I have no cable, no dvd player hooked up. Was watching tv and picture went black. Sound is fine. Just no picture. It's been sitting in my living room for a couple months because I don't want to throw away something that can obviously be repaired, but I don't know how to do it. I bought it about 4 years ago. I took the back off and dusted things off, and everything looks pretty good. I don't see any obvious defects. No blown out or swollen capacitors. Nothing obvious. I am not a tv repair person. I know a little about alot of things, but I don't have alot of fancy tools and I can't afford any fancy tools. I wonder if there might be an easy way for me to diagnose and repair this tv? The diagnosing part being the most difficult for a layperson such as myself. Any info would be greatly appreciated. ShopJimmy seems to be a well run and ingenious organization. Very innovative.

[@jayakumaranrangasamy299]

Hi I have a pioneer plasma. PDP 507 xg the blue light blinks 8 times. What could be the problem

[@noahh.9062]

Hello, I've got a Sony KDL-52S5100. I just bought a used Wii and found that the image through the composite cables is black and white, distorted a bit, and quite dim. I got component cables and found the same result on both component inputs into the TV (yes, I did select the HD output in the Wii settings). I hooked it up to another Sony I have and the image works perfectly, but this is not my living room TV and is way, way smaller. My HDMI image works well, which leads me to believe the issue is in the main board section of the TV. Hoping a simple main board replacement is the likely fix here, but wasn't sure if there was another component I wasn't considering. What are your thoughts? Thanks!

[@noahh.9062]

Actually a firmware update on the TV fixed it! Thanks anyway!

[@albertgharibi8267]

I am having problem with my Pioneer Pro151FD plasma tv. The problem is that I am unable to change my input and it is stuck on input 4 which is the HDMI input. I have a normal audio and video. I can change the volume and can get into the menu but whatever that is related some how to setting or changing the inputs on the tv won't operate. I even can not use the numerical buttons on the remote control to change the channel. I also tried the scroll through the inputs via the hard buttons on the side of the tv, but no luck. When I press those buttons nothing happens and tv displays a banner message saying "starting up please wait" and after a while the message disappears. I tried to unplug and plug the power back but didn't help. I am thinking maybe there is a problem with the main board. Is main board the one that controls the switching the input commands? Any help or suggestion would be highly appreciated.

[@shopjimmy]

Albert Gharibi I recommend replacing the main board in your TV. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=Pioneer+Pro151FD Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: Part Identification Number Guide for Pioneer Main Boards & Digital Boards You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@natanieltayas3631]

I have a Samsung plasma display model pn43d450a2d and it have a clicking sound at the power supply, removed all connection clicking stop when the main board bn96-19469a (main board) is connected the clicking sound return. should I replace the main board?

[@ScottJacobsRealtor]

I have an older Sony Plasma KE-32TS2U (sn:2017034) that has never had any issues until recently. The set powers on, has sound, but no picture. This began as an intermittent issue and after powering on/off a couple times the picture would appear. However, the set now remains without picture at ALL times. We have replaced the set with another to confirm that it has nothing to do with receiver or other components. I am curious what you think is most likely the problem. While I don't have the ability to test them, ALL capacitors appear to be in good shape. I know this set is old but I am having a hard time tossing it. I have read about the Y-SUS or X-SUS boards (or both) being a possible cause for this scenario. I was about to order a used Y-SUS until I saw your video about the Main board. Suggestions on where to start first?

[@shopjimmy]

Scott Jacobs I would start by replacing the Y-main board in your TV. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=KE-32TS2U Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: TV Part Number Identification Guide for Sony Main Boards (LCD, LED, Plasma TVs) TV Repair You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@ScottJacobsRealtor]

ShopJimmy.com Thanks for the response. I placed my order today.

[@ChingasX]

Hello, I have a Samsung PN64F8500AF that has audio but no picture. When I try to turn the set on the red light will blink several times. I can't access the menu from the remote and the startup Samsung logo never comes up. I've read everything from capacitors to buffer chips on the Y Board. Any help would be appreciated so I can order the right parts. Thanks.

[@juanchamorro7443]

Hey, Shop Jimmy! I have an LG 60PA5500 Plasma TV. When the tv is turned on, the video goes away, while the sound is on. Sometimes, the tv just shuts off. I'm suspecting the main board is the problem, but I'm not 100% sure. What can be the issue? Thanks any help and suggestions.

[@venugurujapaneni1655]

i have a panasonic plasma th-p50u20m made in singapore the pblm is its got the 10 blink red led, i opened the back and got the part number tnph0840 km 1a ie the a board number and searched for the part number but found kp 1a and kn 1a. can these be used or suggest me alternate. thank you

[@uh60av8r]

JIMMY- I HAVE AUDIO AND NO DISPLAY ON PN60F5300AF. SYMPTOMS: TROUBLE WITH DISPLAY; WAS INTERMITTENT FOR TWO WEEKS, POWER DOWN AND UP ON REPEATED CYCLES BROUGHT DISPLAY ON, AFTER TWO WEEKS OF VACATION NEITHER HDMI PORTS WORK WITH A GOOD VIDEO SOURCE. SET POWERS ON AND I HAVE AUDIO BUT NO IMAGE IS DISPLAYED EVEN WHEN I PRESS MENU BUTTON. RESEARCH LEADS ME TO BELIEVE IT MAY BY THE MAIN BOARD; PART BN97-06528V OR BN94-06195G. IS THIS A GOOD PLACE TO START WITH MY REPAIRS OR DO YOU SUGGEST SOMETHING ELSE? JOHN

[@parkerourada3435]

LG 50PB560B the picture works for 3-45 minutes at a time and then it will go black and the audio will still work just no pictures. Should we replace the main board? or which one of the board do you recommend? My brother is an rookie electrician so he knows how to install the boards just doesn't know which board should be changed.

[@jms1721]

Hello, My Samsung model PN50A450P1D has no picture or sound when powered on. Will it be the mother board? Can you walk me on how to fix it my self. Thanks

[@drgnfab]

Hello I have an Insignia model # ns-pdp42 that has half of the screen go black and the other half is static. There is clear sound coming from the set, just the visual is gone. Any help would be appreciated.

[@shopjimmy]

***** I would recommend replacing the main board in your TV. Here is a link to the search results for replacement parts for your TV model. www.shopjimmy.com/catalogsearch/result/?q=ns-pdp42 Please call our customer service to confirm compatibility for your replacement part. [phone] Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@DAVTHESLAVE1]

plasma 2010 mod # 842ax - yb09 identicle to one u hav in tutururial,think 42 " clicks on red light & melody sound but nothin but black screen still. got nothing .on logic board there is a flashing green light..asuming diode or some kind indicater..any suggestions..haven,t checked fuses first of all yet. Thanx !

[@DAVTHESLAVE1]

Dave Dunn ref above model # actually is pn42c 430a1d ,sn z1x53cqz601414w

[@butchcrum9929]

I have a Samsung PN50b450b1dxza I have replaced the X-Main, The Y-Main and the Power supply board. I get sound but no picture. All the voltages are correct on the Power supply,X-Main and Y-Main boards. Any Suggestions?

[@parkergust6617]

hi I have a hitachi p42h401 and it turns off on it's own if you know how to fix it please tell me how(it has been sitting in the shed for a while but I did clean it)

[@shopjimmy]

Parker Gust Try all repairs and troubleshooting at your own risk. Sounds like it may have damage that may not be fixable. I recommend replacing the TV. Thanks! www.shopjimmy.com

[@JoshuaCount]

ok, so I replaced the main Y sustain board as advised and got the tv picture to work! issue now is that the picture is very grainy and bad quality. any advice on why that would be the issue now? tv model, Samsung 60" PN60F5300AFXZA thank you again for your time! -Josh

[@johnalexanderjr7151]

I have a Samsung PN64f8500 that suddenly wont have a picture but only sound is coming thru the TV. What board has to be replaced, Is it the Y board?

[@jarrellbarnes9347]

I have a gateway TV model gtw-l30m103 it has control lock on the screen how can I unlock it without the remote

[@levigeisinger3733]

Hi I have a 60 inch LG TV I was watching TV on it one day and it shut itself off and I haven't been able power it back on model number 60pn000-ua I hope u can help

[@argoonz1]

Hi. I got a samsung 50" plasma tv model PS50C450B1W S/N B1TX34PZB07379F. My tv dosnt hav picture but has a sound. The screen is not totally black its a bit like grey. Theres light on the edge of the screen. Is there any thing that I need to replace? Any help will be highly appreciated. THANKS...

[@anthonyhollis9891]

i have an LG 50PT350-UD.AUSLLJR that has audio but no video upon start up. It appears as if a ic on the main board has overheated. power supply seems to be ok, there also appeared to be a blown component (which was replaced) on y sus board. Any thoughts?

[@shopjimmy]

anthony hollis I recommend replacing the YSUS board and the bottom & top Scan Drive boards. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=LG+50PT350-UD Be sure to match part numbers on your current board, with your replacement for compatibility. You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@anthonyhollis9891]

ShopJimmy.com ordered the ysus board and the scan drive boards from the left side of the unit. however I noticed there are what appears to be more buffer boards along the bottom of the chassis. what are the odds that they could be the issue?

[@bribman78]

I have a Samsung 50" Plasma (model #PN50A510P3F) The TV powers on and both my cable box and xbox 360 through HDMI connections display green, magenta, or blue, while clicking on and off until the picture corrects. This took a few minutes at first, but now takes a lot of time. Sometimes if I just turn off the APC surge protector and battery back up off and reset everything I can get the picture to correct. Everything I have read suggest it is the power supply board and the caps should be bulging. I don't see anything like this. I am torn between whether this is the power supply board or the main board. Any advice would be appreciated!

[@manuelhernandez4862]

I have a 65" LG plasma tv serial #405rmku9y149 model #60pb5677-ua with audio but no image, not sure what to look for....

[@toolmanbill]

I have a 42 inch samsung plasma Model PN42A450 that is 6 years old with sound but no picture. No menu or guide working either, no popping sound. Screen stays black when turned on, does not look grey in dark room. All capacitors look good. All fuses are good. Heat syncs on X-main and power board are warm. 2 heat syncs on Y-buffer are warm and one is not. All small heat syncs on Y-buffer are cool.I have looked at the logic board and there are 2 green lights, one comes on and goes out when the tv is turned on, the other blinks continuously about once per second. At first I was thinking it was the Y buffer board but I was told the blinking light would be much slower denoting a problem board. Any thoughts?

[@toolmanbill]

Thanks for the response. Unfortunately the ICs have small heat syncs on them and I can't see them. Should I try to remove them? Thanks! Bill

[@shopjimmy]

toolmanbill I recommend just replacing the Y-Main and buffer boards. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=PN42A450 Be sure to match part numbers on your current board, with your replacement for compatibility. You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@lavernavirden5784]

Hello I have a Samsung 3/D plasma model # PN51E550D1F it was working perfect then I turned it off. Now it won't turn back on, I do have a standby light blinking, I tool the back off and I don't see any leaking or poofed caps. The only thing that looks like it got very hot on the power board is 2 black flat round things with ( DSC 2.5D-15 ru152) on them and the board looks darker in color around these,and there is only 2 of them on the power board,no other board has them. I hope you can help me fix the problem. Thank you Greg

[@parbjotkhela3072]

So I have a lg plasma tv 50PJ550 it gets sound but no picture if I plug in my Xbox with hdmi I just get sound or my dish which has the colour wires and I only get sound what do I need to get fixed if you can reply back fast that would be great

[@dancleveland3201]

samsung model pn42c450b1d. when plugged in power chime sounds but no picture, then power chime continues to chime every 30 secs, I believe this its power cycling. but i dont know how to fix it any help would be great thanks in advance

[@dede6631]

Hello. I have a samsung le46c750r2kxxu and i think the 2x usb ports and the LAN port mite be broke because when i connect things like a usb or an ethernet cable to the LAN port nothing be's recognised. Could it be a problem with the pcb main board. Some feed back would be great thank you

[@shopjimmy]

Dede Lynch PLEASE SUBSCRIBE TO OUR CHANNEL - Try all repairs and troubleshooting at your own risk. I recommend replacing the main board in your TV. Unfortunately I do not see any replacement parts in the search results for your TV model number on our website. Please reply with your part number on your main board and I can try searching for replacement parts. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@dede6631]

The part number is bn94-03388f

[@shopjimmy]

Dede Lynch PLEASE SUBSCRIBE TO OUR CHANNEL - Try all repairs and troubleshooting at your own risk. Unfortunately I do not see any replacement parts in the search results for your part number on our website. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@hollyfagan1474]

I have a Samsung Plasma model PN50A510P3F that I purchased early 2009 and worked fine until the past 6 months or so. Upon turning it on it has distorted pictures and sound and more often that not a highpitched screetching. It turns itself on and off until it stops (I have no control of making it stop) sometimes taking as long as 45 minutes to stop. Thank you for your assistance!

[@shopjimmy]

Holly Fagan I recommend replacing the main board in your TV. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/index/?master_part_type=Main+Board&q=PN50A510P3F Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: Samsung Main Boards & Digital Boards: Part Numbers for LED, LCD, DLP, Plasma TV Repair You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@gsmeadhtc]

Hello I have a 2013 Samsung PN64F8500 plasma TV that has no video but does have audio. I have tried the various HDMI inputs and verified the issue is not caused from other components within the system. Issue started a few months ago and got progressively worse until last week when I no longer get the panel to power up.I power on the set and it just goes through boot process with no power to the display. The problem sounds very similar to other plasma TV's but have not seen the fix for this relatively new model. Samsung support is worthless and TV is out of warranty. I have removed the back cover and performed a visual inspection looking for blown fuses and bulging capacitors. Did not notice anything wrong with visual. Hoping you can provide your expert opinion on the matter. Thank you in advance.

[@neilramlal2786]

I need a motherboard for a lg 55LF6500 MODEL NUM.55LF6500-SB. I have been searching many sites and cant seem to find it.

[@keithharris-pinessothebysi1802]

Had a lightning strike hit our house and Samsung PN60F5300AFXZA will not power on and no standby light. Tried other outlets in the house that are functional. Can you help please? Thank you!

[@shopjimmy]

+Keith Harris Try all repairs and troubleshooting at your own risk. I recommend replacing the main board and the power supply board in your TV. Click this link to replacement parts for your TV model number: www.shopjimmy.com/catalogsearch/result/?q=PN60F5300AFXZA There may be multiple boards for the same TV model number, be sure to match part numbers on your current board, with your replacement for compatibility. Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@johno6596]

I have a Samsung plasma mod # pn50c550gif and I just got my first thin black horizontal line. any advice would be appreciated.

[@shopjimmy]

John O This sounds like a TV panel problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@zannvanwyk5429]

Good day Shop Jimmy. I have a Plasma monitor with model no:PX-61XM4W.The problem I'm experiencing is that the unit switches on and show "no signal" and I do also not getting any OSD menu when I press the menu or any other buttons. I also gave it input signal on the RCA ports and DVI port but still the same results. The main bord number is ANP2117-A.Hope you could help me .Regards

[@taryasullivan7017]

I have a LG plasma tv model #60pa5500 and it wont turn on. The Orange power light is on but when I try to power it on, nothing happens. I checked for bad capacitors and their all good. I disconnected the cord that runs from the main board to the power board and the tv comes on and the other parts or working fine but I get no video or audio. When I connect the cord back, it shuts off and everything stop running. Is this a main board or power board issue? Thanks

[@barkingspider6307]

What problems come when a YC sustain board fails

[@qedupreez981]

Hi i have a lg 42pg60ur switches on and then after a minute switches of by self and then won't switch on again.

[@geowbcnk8572]

What is the easiest way to separate the 6 white connectors between the Y-Main and Y-Buffer on Samsung S60FH-YB02 ( 2012).

[@chiquito003]

Hi. My LG 60PK550 plasma is only getting a green screen in all inputs after an electricity power failure. A friend suggested that the main board should be damaged.

[@BiggLatt]

Hi. I have a samsung pn51d450a2d plasma tv. It will power on just fine and has sound but no picture. Could this be a bad main board?

[@shopjimmy]

Jon Lattimore I recommend replacing the Y-Main Board and Y-Buffer board in your TV. Click this link to replacement parts for your TV model number: www.shopjimmy.com/catalogsearch/result/?q=pn51d450a2d There may be multiple boards for the same TV model number, be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: kzbin.info/www/bejne/iGLNnp2Vm9R8mpI Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@orangedj]

I have a Samsung PN50A510P3F that made a very loud "pop" noise today and then went dim. I can see faded video on every input and audio works. I went through the resetting steps with Samsung and still have the dim/faded picture. Please guide me into what part I might need to replace and about how much it would cost. Thank you for any help that you can provide.

[@shopjimmy]

orangedj Please watch this video FIRST to help with your repair! kzbin.info/www/bejne/eIGWf4mEeKx4rJo I recommend replacing the Y-Main board and the Upper & Bottom Y Scan Drive boards. Click this link to replacement parts for y our TV Model number: www.shopjimmy.com/catalogsearch/result/?q=PN50A510P3F There may be multiple boards for the same TV model number, be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: kzbin.info/www/bejne/iGLNnp2Vm9R8mpI Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@chrisfriessr.1722]

I have a Pioneer Plasma TV model PDP-504PU. When I power it on, within 3 seconds I hear a snap sound from the back and it goes completely black. This is usually before a picture has been displayed although sometimes part of a picture can momentarily be seen. How do I fix this? Thanks, Chris

[@shopjimmy]

Chris Fries Sr. Please watch this video FIRST to help with your repair! kzbin.info/www/bejne/eIGWf4mEeKx4rJo I recommend replacing the Y-Main Board and the Y Boards(Pioneer AWZ6810 (ANP2042-B) 50 Scan B Assy & Pioneer AWZ6809 (ANP2042-B) 50 Scan Fukugo) Click this link to replacement parts for your TV model number: www.shopjimmy.com/catalogsearch/result/?q=PDP-504PU Be sure to match part numbers on your current board, with your replacement for compatibility. Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@liamstacey505]

hello i have a pioneer tv pdp-435pe ser no ebuk031258ew and i dono whats rong the stanby light keeps flaching green and red what do i do

[@alphabah8883]

My LG 42PQ3000 is on standby we change pawer source but still clicking without switching on what is the solution please?

[@DemarkkoStark]

I gotta LG 42pj350 n it's tv speaker aren't working...can you help?

[@bobmartinez5566]

My Samsung HP55053X/XAA starts and works fine cold. Then after a half-hour or so, the video drops as sound continues. The video may return for a bit, then drop again. Ultimately I have to power down and wait. Is heat impacting the video? Logic board? Symptoms consistent but diagnostic help on this flakey problem please! Thanks. Bob

[@shopjimmy]

Bob Martinez Unfortunately I do not see any replacement parts in the search results for your TV model number on our website. Please reply with your part number on your y-main board and buffers and I can try searching for replacement parts. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@JoshuaCount]

Hello, So about a week ago my 60" Samsung, model # PN60F5300AFXZA made a loud pop sound and the screen went blank but the sound was still working. I turned it off and back on and another loud pop sound happened and I now have no picture or sound. I went ahead and bought a new Y sustain board as well as the Y buffer boards to see if that was the issue... Still nothing. Interesting enough is, when I turn it on with just the lower Y buffer board connected, the screen will flash a few times. Same if I only have the upper Y buffer board connected without the lower... But when I have them both connected, once again nothing. Any ideas? Thank you for your time! -Josh

[@metalhead541]

I have a 43" Plasma model PN43D450A2D. I was watching TV one night and it was working just fine. The next day I go to turn it on and you could hear the tv itself power on, but there is no picture. I am unsure as to why this is. It'd be great if you could help me figure out why. Thank you

[@shopjimmy]

Joel Umfrid Please watch this video FIRST to help with your repair! kzbin.info/www/bejne/eIGWf4mEeKx4rJo I recommend replacing the Y-Main Board and the bottom Scan Drive board in your TV. Click this link to replacement parts: www.shopjimmy.com/catalogsearch/result/?q=PN43D450A2D There may be multiple boards for the same TV model number, be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: kzbin.info/www/bejne/iGLNnp2Vm9R8mpI Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@garyorewiler220]

#pn64f5500afxza no picture or sound power light comes on green light on main board flashing replaced y main board still no sound or posture what next please

[@will1231]

Hi i have a vizio plazma tv model m70 1d-a3r the tv will come on with the power button in the back but will not work with the remote i get a blue screen which then fades out but you can still see that the screen is still faintly lite up. There is no sound or picture. Thank you.

[@dcshipps]

I am dealing with a samsung PN60F5500AFXZA. I have sound but no pic. I am thinking of replacing the x and y cards. Should I replace the main board as well?

[@dondonstaton5989]

hey sir did you get this TV working I have same TV with same issue

[@dcshipps]

DonDon Staton unfortunately no. its dead

[@dondonstaton5989]

it's a shame you pay that kind of money and it only last you a couple of years thanks for the reply

[@johnnycrossway4249]

replace the main board and boom, you back on......had the same problem and i did iny miny moe on the boards and it worked for me.

[@josephdavis8094]

I have a Magnavox 50MF231D/37 Plasma TV, I replaced two bad capacitors. The TV turns on but will not power on the screen or sound. I Checked all pica fuses and all Voltages on TV and all boards are on and ready to recive signal. I have all the green led lights come on when pluged in. on the Main logic board I have one led light on (power supply side) then two leds light come on left side one goes out and the other starts flashing( replaced Main logic board) but TV screen will not turn on and no sound. on the Main Board I have two green led lights lit. TV will power on with remote but TV turns off after ten minutes because of no Video signal. Can the main board be the problem with this TV? What are the symptom of a bad main board?

[@ongsenghee7241]

Can help me to rectify my PDP5070HD ,cannot power up,Red LED blink 3 times in one cycle.Sw on/off a few times,it is ok,nice picture.

[@Caniusethisplease]

i have a lg ph6700 plasma no lights just one click when i plug it in. if i disconect the main board from power supply my screen will light up, but i still have no power indicator (red light) on the front no power up sound. i had a power surge does this sound like a main board or power board issue

[@shopjimmy]

+Deezz Try all repairs and troubleshooting at your own risk. I recommend replacing the main board in your TV. Click this link to replacement parts for your TV model number: www.shopjimmy.com/catalogsearch/result/index/?cat=56&q=ph6700 There may be multiple boards for the same TV model number, be sure to match part numbers on your current board, with your replacement for compatibility. Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@CbullyNC]

zenith z50pj240--- I have sound but no video. i' using a hdmi cable and can confirm this. i have replaced the ysus and zsus but still audio and no video. resistors seem to be fine. could this be a main board issue?

[@shopjimmy]

God Dreamer777 I would recommend replacing the buffers in your TV. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=zenith+z50pj240 Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: LG Plasma TV Repair: DIY Part Identification Number ID Guide for LG & LG Philips Plasma Panel Parts You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@CbullyNC]

awesome... i took a stab at it and ordered a few days ago. thanks... hope this fixes the problem. i noticed also the upper buffer was popping/sparking. the tv is on, sound is there, and when it pops white lines flash very quickly across the center of the screen.hope that fixes it.

[@garybailey3046]

I have a LG plasma TV model number 42pa4500 the serial number is 209rmn9j191 the LED power light is on but the TV still will not come on

[@Akashwanikumar77]

I have 19 inch toshiba led tv 19HV10ZE. There are vertical lines on right half of the tv screen. Audio is ok. What can be the problem and how it will be corrected ?

[@shopjimmy]

Ashwani kumar This sounds like a TV panel problem. If your TV panel is bad, it may be more cost-effective to replace the TV as panels are typically hard to find in stock, difficult to replace, and expensive. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@annefrey2526]

Hello. I have a sylvania model number 6842thg plasma tv. It has been acting funny and powering off and then back on when changing inputs. This was happening at random. Now- there is sound, but no picture at all. It does not even show menu or input indicator on screen- it oooks off even when powered on. Help!!! :)

[@shopjimmy]

Anne Frey Please watch this video to help with your repair! TV Repair! LCD, LED, Plasma, DLP How To Fix Your TV with ShopJimmy.com Help! I recommend replacing the Y-Main Board and the Y-Buffer (Y-Scan Drive or YDRVTP). Here is a link to replacement parts: www.shopjimmy.com/catalogsearch/result/?q=6842thg Be sure to match part numbers on your current board, with your replacement for compatibility. Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@TeamDominicano]

Hi, my TV VIZIO sv471xvt not power on, not picture, not light, nothing, let me know if change it the motherboard it'll be ok... answer me as soon as posible, please, thanks...

[@shopjimmy]

fernando montero I recommend replacing the main board for your TV repair. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=sv471xvt Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: TV Part Number Identification Guide for Vizio Main Boards (Plasma, LCD, LED) You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@engelbertvivas7343]

Good evening I have a tv samsum model un40d64550uf the problem that he presents is that it does not ignite only remains in Stand by and there sounds a pop that might be

[@shopjimmy]

Engelbert Vivas I would recommend replacing the main board in your TV. Unfortunately I do not see any replacement parts in the search results for your TV model number on our website. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@ShamshulJ]

i have a problem with my LG42PN4500 plasma ... turn on about 5 min and then goes to standby mode .. i turn on again around 10 sec go back to standby.... what the problem??

[@williamcummings1289]

I'm having a problem with my Samsung PN42C450B1D. The video went out all at once. I have sound and can power the unit on with no trouble. I can not get the tv menu to display. I have tried connecting to all video inputs with the same results, no video. When this happened my cat was walking on the tv stand and knocked over one of the exterior speakers I have. The speaker fell over and may have came in contact with the HDMI cable that was plugged into the HDMI 1 slot. I could see no visible damage to the cable or the input itself, but the video went out at that time. After watching your video I pulled the back cover off and looked at the main board. I removed the main board and there was some whitish colored crusty stuff on a portion of the underside. TIA for any thoughts. William

[@shopjimmy]

William Cummings I recommend checking the screen for cracks. If there are cracks on your screen, then your TV is ruined. If you do not see any cracks, then I recommend replacing the main board to see if that fixes the problem. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=PN42C450B1D Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: Samsung Main Boards & Digital Boards: Part Numbers for LED, LCD, DLP, Plasma TV Repair You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com

[@jrsgarage7211]

hi i have a samsung hp- s4235 put a new power board and still no power on and click sound! when i disconnect the left cable from the main board the click sound stop! but wont turn on! thanks

[@shopjimmy]

+Jaime Reyes Try all repairs and troubleshooting at your own risk. I recommend replacing the main board in your TV. Unfortunately I do not see any replacement parts in the search results for your TV model number on our website. Please reply with your part number on your main board and I can try searching for replacement parts. Thanks and please let us know if you have any further questions! www.shopjimmy.com

[@cesarh911]

I have an issue with a Philips widescreen flat TV 50PFP5332D 50". I am having trouble with the main board, were every time I would connect my TV to my cable box (HDMI port) it would turn off within a few minutes. I did the research and watch your videos. There is no problem with the power supply board. I order the part (Main board 310431361734) and made the new installation. It turns out that my TV does not project the image but only the audio. Where can I go from here?

[@shopjimmy]

Cesar Hernandez Double check and be sure that everything is plugged in correctly with your TV. Thanks! www.shopjimmy.com

[@veronicasanchez4360]

My tv autumatically turns off after 2 ton3 sec LG plasma 60" PC1D-UE

[@davebrownlee3985]

Hello there, my name is David and I have a problem with my Samsung plasma TV model PN51E530A3FXZC. When I turn it on in the morning it comes on then will turn off a few minutes later. It may come on again within a few minutes or so or I have to unplug it for a few minutes then plug it back in and it may come on. I will have to do this a few more times but I noticed that when it warms up it seems to work fine. Once it stays on for a while it works ok but I have to leave it on all day or repeat the process all over again. Any ideas?

[@csonbea1]

Hi . I have an LG42PT350 it's turn on vith no video , just sound and click. I changed the power board and still no video.

[@shopjimmy]

laszlo kalo I recommend replacing the main board for your TV repair. Here is a link to replacement parts for your TV model number on our website, click here: www.shopjimmy.com/catalogsearch/result/?q=LG42PT350 Be sure to match part numbers on your current board, with your replacement for compatibility. Here is a link to a video showing how to identify your part number, click here: TV Part Number Guide for LG & Zenith Main, Digital, & Tuner Boards (LCD, LED, Plasma TVs) You can also call our customer service for further assistance with your purchase. [phone] Thanks and please let us know if you have any further questions with your TV Repair! www.shopjimmy.com