Shortbed conversion duramax lb7

[@rayjon237]

Thank you for doing this I hunted all over the Internet and found a lot of bs,. Nice explanation and clean work ..

[@Pressedsteelcustomsllc]

Getting ready to do a long bed to crewcab shorty shorty conversion. Can't find anything vids that show someone doing the job and any major steps besides the normal frame shortening. I know only difference is its 21.5 inches.

[@j.d.martinez153]

kzbin.info/www/bejne/iKinf2ubrs6UY80feature=shared This might help out, I am gonna be doing a conversion this winter.

[@obs_skerr]

how much do you charge for this im interested

[@santosbustos5478]

Did u do a one piece drive shaft

[@jonathangarcia7154]

Can it still tow tho ?

[@Old-time-miner]

Seen on another channel, the guy moved the leaf spring mounts up and just cut off the excess off the rear.

[@marcos2352]

what video is that?

[@fullsendautomotive8915]

@@marcos2352truck masters

[@GusMahn]

Is the back end sitting high because of the way the front spring mount had to be welded where the frame steps down to go under the cab? Did this change the driveshaft angle?

[@rayjon237]

If you look the leaf sits flat, hangers at same height.. he did it right it sits high because of the hd springs and no weight on the back. The drive line angle won't change but the angle on the u joint will due to the shorter shaft.. Depends on where they set the ride height it may need a pinion angle adjustment (normal 4x4 stuff).. impressed really clean work and showed what he did...

[@erasedfromgenepool.4845]

Hola mi amigo que paso? How much you charge to do a 2008 Silverado 2500 HD single cab with 8 ft bed. Convert to shortbed? Also where are you located? You have beautiful welds nice work!

[@1heart7seas1moon]

What is consider a short bed ? 6.5 ?

[@RICKSIFUENTES]

Are you still doing this work? I have one I need to get shortened.

[@Dannylsx_]

Which tank did you use? I’m in the process of shortening mine. Does it have to be a 1500 tank or as long as it’s from a short bed truck

[@HazrdHazrd]

Late response and Im sure youve figured it out lol, but as long as its a 6.5 bed tank. a 5.8 bed tank wont work

[@Dayvid85-s4o]

Will the short bed version be able to pull like the long bed version?

[@GhostTrucking]

How do I get in touch with you about doing a shortbed conversion

[@Almighty_sebax]

Can you do it in a 1500 4x4

[@marioeskivel3377]

Tambien se puede usar un shaft de una short bed ? Saludos desde Missouri 👍

[@hpracers305]

En este caso se tiene que recortar bro porque si es de 1500 short bed son diferentes los u joints y el slip joke de la transmission

[@saintnificent5532]

Brazo de Oro

[@luisloza5746]

Viejos páseme la disecciono del shop que tiene en Vegas tengo una camioneta Que quiero cortar gracias

[@johnkelly6392]

How much to shorten a 1994 ford f350 ?

[@crzmotorsports88]

What driveshaft did you use? Mine has a 2 piece with a carrier bearing. I want to switch it to a 1 piece driveshaft

[@morethan1e463]

how many inches did you cut out, did you start basically from the seam in the frame and measure/cut from there?

[@yankee4893]

Did you change the vapor canister

[@jasonharrison25]

Diesels don't have a vapor canister

[@jessefigueroa3246]

Cool work man, what about the brake lines, did they need to be shortened?

[@hpracers305]

Thanks buddy You can shorten the brake line or do like a loop

[@marcopaletas5046]

I’m doing the same on my lbz But why is the extra tank for ?

[@hpracers305]

You have to use a short bed fuel tank bc the original fuel tank on your truck is too long so when you move everything forward it hits on the diff

[@marcopaletas5046]

Okay appreciate it and nice work your doing

[@ricardoortiz5524]

How much does it cost to do something like this

[@hpracers305]

Around 3k including driveshaft

[@Candyvyorn_]

@@hpracers305you still doing these conversions? Bring you a truck and bed and 3000 later it looks like that?

[@notascold]

I’m interested into short bed conversation my truck a 1988 Chevy obs long bed

[@bradzimmerman3171]

Now I can see why "gm" trucks are so bendable yikes 😬

[@jovannigonzalez7214]

Tines a Instagram bro ?

[@hpracers305]

Simon bro iram_hp_racers

[@davenava6886]

​@@hpracers305hey are you in Vegas