Satori Flat Rack, pool billiard custom wood ball rack

[@Rubster760]

Master craftsmen at work 👏.

[@jaberoujourney]

So relaxing watching you make this awesome custom pool rack. Attention to detail was remarkable. 👌

[@georgedennis2112]

I Love it Bob. An amazing job and skill putting the whole thing together. If I had a table, I would surely purchase one. Good luck with it.

[@katierude5622]

Amazing, just amazing

[@jjtt7408]

WHEN WORKING WITH POWER TOOLS AND MACHINES LIKE A TABLE SAW OR EVEN A HAND HELD POWER DRILL / PULL UP YOUR SLEEVES AT LEAST TO THE ELBOWS ON YOUR LONG SLEEVE SHIRT / TO PREVENT A MOVING CUTTER OR LIKE A CHUCK FROM GRABBING YOUR SHIRT SLEEVE AND PULLING YOU INTO THE CUTTER / IF YOU LOOK BACK AT YOUR VIDEO YOU WILL SEE WHAT COULD HAPPEN IF YOU GOT JUST A LITTLE CLOSER / I HAVE SEEN MANY BLOODY ACCIDENTS IN THE MACHINE SHOPS AND IN THE CARPENTERS UNION BUILDING ON BIG JOBS / SAFETY FIRST IN ALL TRADES / THANKS FOR SHARING PS# YOUR WOOD WORKING SKILLS ARE AT THE TOP OF THE GAME IN MORE WAYS THAN ONE / NICE JOB, NICE RACK / THANKS AGAIN

[@ShortstopOnPool]

Over 20 years ago I had a very slight mishap that could have been much worse which was my wake up call. I've taken tool safety very seriously since then so I have to admit how correct you are. Thank you for the notice, I will do better. I've built dozens of these racks now, and its amazing how better I am than the early ones. So many very little things that make a huge difference in fit and efficiency. Thank you for the compliements. Bob

[@poolhustler6]

Beautiful work and result. My only concern would be the pegs on the bottom marring the cloth over time. I used a "roller" rack long ago and even that left lines in the cloth.

[@ShortstopOnPool]

Yes, other commented the same. I have already changed the design. Great feedback on this prototype. Stay tuned, will be ready to sell them soon.

[@2869may]

Hell, the balls will leave lines...

[@giraffeapproved]

This is amazing! I was looking at making myself one of this racks for my 4.5 Foot table. Now..to only figure out how to downscale this for 38mm balls!

[@pooldoc7344]

I too am concerned the pressure/friction from the pins will become problematic over time. You have great skills on and off the felt.

[@ShortstopOnPool]

Did testing and I agree. Rack has been redesigned with triangular wood "foot". Still looks like a spaceship. LOL

[@51Dss]

very skillful work. you must have been a shop teacher!

[@dannyblackburn304]

I want one for sure

[@neilmunro7961]

Very Classy.

[@mimikemorgan.shoots2643]

All right Bob, here goes. Everything looks fine until you get to the feet. The issue is too little surface area which creates high friction at that point. I understand, like you said it glides really easily on the pool table felt, but you are going to get wear marks Allah the predator rack. What you need to install is a complete triangle of wood,metal,whatever, that will have complete surface area. It does not have to be very wide. Maybe as narrow as a half inch but with greater surface area you will have less contact friction. All of this would be at the same height that you have right now. And again as I say, the reason being is because the predator rack really marred up the felt on the pool tables at the diamond and predator 10 ball events in Las Vegas a couple of weeks ago.

[@ShortstopOnPool]

Thanks for the feedback. I saw their rack in Vegas. Noticed their standoffs come to a rounded point. My standoffs are each a circle, sanded to to 1500 grit. I think that makes the difference. Initial testing shows the same problem. Darn. On to prototype number 2!

[@keithkruger7270]

@@ShortstopOnPool Bob, ya know those plastic furniture sliders...the flat plastic discs? You need something like that on the end of the standoffs...maybe 3/4 to 1" across.

[@robertforrest1763]

Beautiful job wish I had one LOL

[@snovmx]

I just bought one of these.

[@MsScrappygirl]

I like it!

[@brianpoor763]

cool idea

[@antoniomagdaleno4306]

I wouldn't mind buying one of those prototypes from you.. if you don't mind how can I reach u for one of those? Thanks for your time

[@ShortstopOnPool]

Just one prototype and the fit/finish isn't quite perfect. Will be taking pre-orders soon. Stay tuned. Thank you!

[@millsbobster]

beautiful! given your interest in straight pool, it seems like the skinny side could be rotated 90°?

[@ShortstopOnPool]

Yes. This rack is not for Straight Pool. I'm working on a prototype rack for Straight Pool that will be very thin, but strong - no deflection.

[@glenwilliamson9745]

yes would love to buy one please let me know about price

[@ShortstopOnPool]

Thanks for your interest! This is a prototype, refining the "legs". Should be ready to sell within a couple weeks. The price will be $179.95. Price compares to other high-end racks and is the best looking, IMO.

[@thetemp69x4]

Where do you get the 8,9,10 ball disks?

[@dannyblackburn304]

Would be neat if you could cut a 8, 9, and 10 ball in half to use as the legs instead of the pins

[@ShortstopOnPool]

Ooh, now that is an idea. I'll have to find an old set of balls and experiment.

[@williamsheppard8738]

I like it and every detail except for the pins they need to have a little more safety to them especially for league players I would put like any kind of little plastic or rubber piece where it has contact with the field because you have these league players they're going to press really hard and you know what happens next

[@ShortstopOnPool]

I agree. I've redesigned it now has a triangular wood "foot". Still looks like a spaceship. LOL

[@bradleyforrest2684]

Hi Bob, I would like to purchase Flat Rack, can you give me all the ordering details. Brad

[@ShortstopOnPool]

Thank you! This was the prototype. Gearing up for production now. Will be taking pre-orders very soon. Stay tuned. Thanks again.

[@soorgolf1234]

@@ShortstopOnPool cool I’m interested also

[@SayntGee]

What is the price of the satori rack?

[@ShortstopOnPool]

Price shown on the website: www.shortstoponpool.com/ball-racks

[@phillipivy9780]

Why not tip the pins with phenolic resin,i.e.ball material

[@ShortstopOnPool]

Thought about that. Aside from complicated process, weight concentrated at 3 points and sliding vs rolling.

[@deltapoolrack576]

It looks like a wooden copy of the original Delta Pool Rack

[@allengrimes1158]

Are the dimensions for a wooden nine ball rack a damn secret or something

[@mycatsinthegarden]

Why are you being rude to someone who took the time to make and post a useful video?

[@javiermolina828]

Unbielevable 😅