Should I Seal My Artwork Before I Resin?

Do you need to use a sealant before you resin?
In most cases, no, you don't need to use a sealant before applying ArtResin; however, there are some situations when sealing first makes sense. The most common are:
• Sealing to prevent resin from absorbing into your project.
• Sealing over materials to prevent them from becoming loose.
• Sealing over objects that may release air bubbles into the resin.
If in doubt, it never hurts to use a sealant first, but we always recommend doing a test on a scrap piece so you know exactly what results to expect.
Today we’re going to go over the main reasons why sealing first can be a good idea and share which sealant works best in each case.
For full written instructions, please see our blog Should I Seal My Artwork Before I Resin?
www.artresin.c...
Enjoy the video!
ArtResin: Made For Artists, By Artists.
www.artresin.com

[@andreamcreynolds420]

Explained perfectly! Great tutorial

[@klairbaranek]

Awesome tips for resin 🥰

[@rebeccafionacornel6558]

Thank you for these Tips....

[@ethelash5346]

Thank you

[@lindaeastment4542]

HI, Thank you so much for sharing your Knowledge about the resin art world I really found your tutorial very helpful Lin ❤️👍

[@watkinstreasurebox]

Thank you, I appreciate the knowledge!

[@tinaregis2356]

Exxxxcellent video!

[@EtherealScreams]

Very informative. This was a great video!

[@tahoora_resin_art]

This is very helpful ❣❣❣

[@rebeccahyatt7789]

Thank you so much for the information. Very helpful

[@SalemSphynx]

Great video of thank you!!!

[@happytripteam6657]

I Will be glad if tou add a translation to your videos. Hugs from Greece

[@Artresin]

Great idea! I will pass along the suggestion and hopefully get some Greek translations :)

[@a.c.6124]

Outstanding video, thank you! This helped me understand a few things I was curious about. :)

[@Artresin]

Thank you! We are happy to help :)

[@tahoora_resin_art]

Amazing ❤❤❤

[@tonyaneeley7895]

Thank you for the helpful info! How to I go about gluing a print photo paper to a small wood block?

[@Artresin]

You can use a spray adhesive to adhere your photo to the wood block, then using a roller you can roll the surface to remove any air pockets. If you determine that your photo requires sealing, you can do so before you apply your ArtResin.

[@tonyaneeley7895]

Ok great! What do you use to seal photos before gluing to the wood? Thanks so much for sharing!

[@Artresin]

@@tonyaneeley7895 if you aren't sure you can check with your local art store to see which sealer they recommend. We like Krylon spray sealers ourselves.

[@lexy10985]

I have a few bottles of art resin but I’m not sure if Art resin is just good for art work coverage or can you use it in molds?

[@francessmith9063]

I have successfully used Art Resin in molds try it out it’s fun.

[@lexy10985]

@@francessmith9063 did u? Awesome! I didn’t want to try it and waste the resin if it isn’t meant for molds Art resin is expensive lol

[@Artresin]

Hi Gina, ArtResin is a coating resin, best suited to thin applications. You can certainly use it in small molds, for deeper molds we recommend pouring in layers to allow bubbles to escape and prevent excessive heat. Let each layer cure for 3-5 hours before pouring the next layer.

[@francessmith9063]

@@lexy10985 yes I have, it works well.

[@kenstrees]

would you use a spray sealant before resin on a sugar cookie with frosting? I put on one coat of resin and it pulled away from some of the frosted places, I am hoping if I use spray sealer it will accept the next coat!

[@Artresin]

If in doubt, it never hurts to apply a clear coat of sealant before applying resin. A sealant will create a barrier and will protect the food coloring in the frosting from potentially bleeding into the resin, or the resin from absorbing into the cookie or frosting and creating dark spots. I would use a spray sealant, as a brush might damage delicate frosting. And best bet is to do a test first, if you can, to make sure you get the results you want. Good luck!

[@kenstrees]

@@Artresin thank you so much for answering. will do that.

[@danecory1236]

I do mixed media on ampersand clay board with watercolor and acrylic. Would you recommend a sealant and what kind?

[@Artresin]

The general rule of thumb when questioning if you should apply a sealer first is if the surface or material will absorb water, it will absorb resin so you may want to consider applying a sealer. If you touch a wet finger to your surface and the moisture darkens it, you can expect that when you apply your resin it will darken and remain that way.

[@danecory1236]

@@Artresin thank you!

[@cchemmes-seeseeart3948]

is art resin archival for fine art? where can i obtain info on this? thanks for the video

[@Artresin]

Unfortunately no epoxy is truly archival as it forms a permanent bond with the surface it is applied over and all epoxy resin will eventually show age.

[@texasmarshalls]

What sealant do you recommend for canvas with frame?

[@Artresin]

We typically just give them a coat of gesso or even acrylic paint. Just be sure that you allow your paint/sealer to dry fully before applying ArtResin.

[@ethelash5346]

What about paper bag art?

[@steveingalls753]

You didn't actually mention ANY sealants as examples of what we could choose.

[@Artresin]

We didn't mention brand names, not all brands are available in every area where this is viewed. When choosing a sealer find one that does not yellow, dries clear and that works with the surface you are coating.