Fail Proof Technique for Sealing Paper in Resin

Making some resin coasters for my desk and showing how to properly seal paper for protection from resin.
Support this channel, buy me a coffee or become a monthly subscriber...
www.buymeacoffee.com/ResinBelle
Check out this Idea List on Amazon: Resin Belle Wish List by Resin Belle a.co/0L2OdWJ
the glitter I'm using is from Glitter Hippo. I used "Bedazzled" and "Obsidian Pearl" and I also used some irridescent fake snow flakes from Target.
Follow me on Instagram @ ResinBelle
and my paper craft KZbin channel is Vintiquities / vintiquitiesnetoriginal
my fave resin to use is Alumilite Clear Cast I have it and some of my fave resin products in the link below
www.amazon.com/shop/findapenn...
Music: www.bensound.com

[@analiaf.j.6131]

I have never done resin before, just received my kit today. I have a tiny handwritten note my Mom wrote for me before she passed, I was starting a new project in my life and she wrote something wishing me the best and giving me her support. I treasure that little piece of paper like nothing else! And I thought of doing a bookmark in resin, and put the note there so I could have it with me always and preserve it, your video helped me avoid messing up!!! Thank you! I will practice first with something else though! 😄

[@littleangel9531]

Photocopy your note and try it first with the copy, just in case.

[@Rilakkuma_friend]

Instead of sealing the printout, I paint the back of my printout with two layers of white acrylic paint (dry between layers). So despite the resin soaking into the paper, the printout does not get that grey look from light going right though it. The white acrylic on the back helps reflect the light. The photo ends up looking like it didn't soak up any resin.

[@ResinBelle]

That's a cool new technique. Thanks for sharing!

[@lolabunny7788]

Thanks for showing how and TELLING WHY

[@christiedecker2724]

This is one of the most helpful resin tutorials I have seen in a long time. Thank you for showing us first how to heat the print to set the ink, then to seal it up to embed in the resin. I am most pleased with this tutorial. Blessings to you and yours with health always.

[@Reag713]

Please 🙏 question so I need to do it with resin not epoxy iam trying to put it in my stainless steel cup

[@ResinBelle]

@@Reag713 same process, check out my video showing the Charlie Brown tumbler using book pages in resin.

[@evryknee4176]

I second this comment.

[@valoriesteel7411]

You are absolutely right , very informative and makes it look very simple and beautiful

[@fatinaevans66]

Beautiful thanks for sharing. I’m so inspired. Had one perfect project and many fails can’t wait to wait on my next project. Thank you thank you 🙏

[@lunaphoenix06]

Thank you for this. I've been thinking about making pendants with pictures or drawings and I was worried about how the resin would affect the paper, so thanks again!

[@FluidArtwithErika]

This is a terrific way to use paper in resin projects. I can’t wait to try it. Thank you for making the video! ❤️🌵✌🏻

[@alexandragarciabaudrit5835]

Could you try it? My ink keeps smudging every time I try! I died heat, iron to set the ink after printing but nothing! It still smudges! Any ideas?

[@FluidArtwithErika]

@@alexandragarciabaudrit5835 This is on my list to try, lol! I know that using laminating paper has been successful for me. I’ll let you know as soon as I try this!

[@LogicBob]

Why hello

[@maureenreeder]

I keep watching to see why heat is used on the front of the picture in the beginning. Is it painted with a glue first ?

[@soonj7742]

This is such a helpful video, thank you for the tips. I am venturing into my first resin project and I appreciate you teaching and sharing your knowledge. 💕

[@prpisces035]

Thus makes so much sense, as long as I've been crafting I just started playing w resin and I I so glad I found ur channel!

[@Sparklynailz]

Thank you so much! You’re one of the only people who have covered this topic

[@carlaconidi408]

Thanks for the great tips! So far I've only printed on to transparency film so I look forward to trying this with paper!

[@patcosta4117]

Thank you for sharing this tip. I will definitely try it. Yours turned out amazing!

[@No.ThatPrettyGirl]

I haven't started resin crafting YET, but I have to say when u began unfolding the first coaster, I felt like a child on Christmas morning 😀 THANK YOU!!! ❤

[@ResinBelle]

Aww thanks so much for watching!

[@DrCarlaSeleme]

This is a well done tutorial. Thank you for your time and effort that you generously shared in order to impart this wonderful information. I know it will be very helpful for me.

[@jacynthetofcrazycreations4869]

Thank you for the clear explanations on why you do it that way. I appreciate you making this video.

[@sarahleone6117]

I used this last year to make Christmas presents and it worked out perfectly. This year, I'm making some more and looked this video up again for a refresher. It is so helpful.

[@dilheanedundas2571]

I’m so happy I came across this video! I’ve been trying to figure out how to seal my pictures for Resin. I was told mod podge but this way looks better, just ordered the Tacky Glue 😂 thank you

[@handyjuancrafty9108]

Two years later and you are still helping. Thank you, thank you, thank you. I cant afford a cricut right now and can I tell you. All my inkjet pics for my coasters, keychains and others are all beautiful due to your technique. Thank you, I really appreciate it.

[@ResinBelle]

I'm so happy to hear it!

[@jaykb6587]

I have a Cricut and regret it. It, I, and my computer are not compatible. If I hadn't been given it by my sister, I would really resent it. Spending over $500... I can't see many people getting that back in sales. So don't feel bad about not having one!

[@jkm253]

This is awesome! Thanks for sharing and giving so much detail and many tips! Love your logo it’s adorable!

[@SuperCoyote7]

Wow, they are amazing, love the idea of paper, will have to watch a few more yet....Love the colors.

[@RDEZtinationsCreations]

Thank you for sharing this, I'm just starting with resin projects. This is great advice.

[@robinlibby8388]

Ooh, thanks for the tips. I was watching this at work due to one of my customers wanting to do something like this, but I'm thinking of doing this myself too as Christmas presents.

[@ResinBelle]

Awesome!

[@LowVisionUKTerrysView]

thank you for this tutorial - it was excellent, I have had so many issues - so very much looking forward to trying your method...excellent

[@joycewhitworth4252]

These are absolutely beautiful, the colors are amazing

[@lnc-to4ku]

Such amazing advice, thank you so much! Your work is gorgeous! 😍

[@goddessgood118]

Just beautiful...you’ve inspired me to step outside of my box, and explore my creative abilities. Fingers crossed!!

[@ResinBelle]

There is truly no greater compliment. Craft on girl!

[@lorrainepurple]

Excellent video and I love that combination of colors and glitter. Thank you for the explanation.

[@ctconn35]

I agree with Christie, really informative and appreciated, they turned out beautifully ❤

[@AG-we8gg]

Thank you so much for this video. I was using sticker paper n laminate over the top of it which isn't very cost effective. Plus, I would still get some resin seeping thru at some edges. This was very easy to follow and the colors are still bright after the glue dried. Just awesome! Can't wait to try this method

[@senihani6634]

Thank you for making this tutorial. I've been wondering how to make my drawings into resin keychains and was answered by you making this tutorial!

[@ResinBelle]

Yay! I hope they turn out great!

[@craftnm7225]

Very good info! Thank you for explaining why things should be done a certain way. Beautiful coasters!

[@user-wp3cf7xw1o]

Thank you for this tutorial. I LOVE crafting and am embarking on the making of resin coasters. So much useful information in a short amount of time. Thank you!! Thank you!! Thank you!!

[@nadinemessaoudi3962]

Just when I was on the verge of giving up!! thank you so much for the trick! This is the easiest and most efficient way that I used to stop resin from leaking

[@AStarBaby]

This is a great technique I hadn't considered. Aleenes is great. I used it to seal some beads on a project, worked better than modpodge and kept shine. Thanks for sharing 😊

[@tarablohmakamrswillstreasu1805]

Great instructions, so clear and simple. Very good explanation of the whys in your process. Thank you.

[@sylviamaclellan5708]

WoW! Great tutorial, they came out so beautiful! Thanks 🌸

[@kat.joelle]

thank you, thank you, THANK YOUU so much for this! putting foil pieces into my projects has been my new challenge & it’s been exactly that. 😩 so many folks don’t share their resin tips, so it’s appreciated.

[@DashaJZ]

Flawless!!!! Thank you so much for sharing!

[@riabrown2379]

This was a wonderful how to video. Thank you for sharing. Beautiful project.

[@KittyCakeHate]

Thank you for your amazing help! I can't wait to get some more resin and put this to work!

[@pjfoltz8810]

Glad I decided to watch this! I wanted to use a picture in my resin tray. I thought of using modge podge. I have tacky glue so I will be using that! Thank you for sharing!

[@3rmbt81]

Omgosh I'm so glad I found your video! Just in time for doing 2 gifts that require paper to be used in them. Im going to be using actual pages from a book. Thank you!

[@ResinBelle]

Awesome! I have used book pages with this technique many times and always get good results

[@theoracle888]

Those coasters are beautiful and I love, love, love your logo! Thanks for sharing these tips

[@impressionsbyangie7418]

Beautiful...I would use for my nail pallets too, the glitter queen here loves it

[@Emiliapocalypse]

Love your intro music!! I usually skip past intros, but your music has the feeling of the opening of a 90’s family film. My heart is thoroughly warmed 😋

[@ResinBelle]

Lol thanks! I like music that is happy over all. I'm glad you feel it too.

[@ShawniOntheSpot]

OMG I am so glad I came across your video! I have ruined a project I am currently working on twice simply because I did not seal my photo properly on the Resin! Perfect timing for me to see this as I am attempting the same project a 3rd time! I now Know what to do, Thank You!! Subscribed.

[@cherylwager1511]

love this video. Really helpful. Where is your glitter from please? x

[@gildedingold]

Just gorgeous!

[@deuxchows]

THANK YOU for this. You've inspired me to give resin casting a try, now that I see how it can be done well.

[@christinebrown7934]

Those are THE most beautiful coasters I’ve seen. Great job!!! Love them ❤️

[@dreamseller82]

I actually love everything about this video. From the way you’ve taught how to transfer an image to resin to the color combination you’ve used. Everything’s lovely

[@ResinBelle]

Thank you so much! I appreciate you watching. Have a wonderful day!

[@MONSTERXC70]

They look great!!!! I found this looking to make custom badges for my car. Great tips for helping me to achieve a good product.

[@EstablishedLowriders]

Beautiful work and great video letting us in on the creativeness in your craft❤️

[@shanikaa8]

This was an absolutely perfect explanation Thank you!!

[@cynthialuc1]

Thank you - I am trying to make a gift for someone -- I really appreciate this video

[@verdajbastian4157]

Awesome!!💚 They are Beautiful!! This is a MUST try!! Thank you!!

[@anitapharand2313]

Thank you so much! Excellent video and suggestions! I am ready to give resin a try!

[@amcvart9839]

THANK YOU!! I want to make little resin pins using my art and I'm terrified of ruining them because they take so much time and effort ✨

[@Brianna_Pico]

I like your way better. I will buy the glue lol and this looks like it’s more fun and less stress😂 beautiful work

[@glynisjohnson5501]

I've never done this but you have done a Beautiful job. Thank you for sharing

[@nicolefishburn235]

Just getting into resin and all this so been researching and watching videos..bought new house and want to make some lights and stuff like this with my daughter..thank you

[@mistymidnight4447]

My fave method is glossy photo paper, with the resin I use it doesn’t bleed, or wrinkle. I massage some resin onto it before adding to a tacky layer of resin.

[@tinamrankin1154]

Hi Misty, does the thickness of the glossy photo paper cause any issues with lying flat?

[@sarahdermody6665]

I've not used paper in resin yet, but now I feel confident I could go and achieve a good result, thanks 💜

[@glitteringwaxbutterfly450]

Thank you so much for this tutorial, I reeeaally needed this info. I also think your logo is just darling.

[@gracefreeman3261]

They are beautiful...thanks for the helpful tips...and thanks for sharing

[@hayleywright2966]

I use amazing clear cast resin too ... what heat does it withstand because I couldn’t find it on the uk website Thanks for the tips! So far I’ve used my laminator for images and not had any problems with resin leaking in but I’ve seen others have problems with that. So it’s nice to have this as an a,tentative if the laminator stops working

[@trillznubia2146]

Great work! When printing out photos do you need a specific type of printing paper?

[@ms.d6857]

I watched this video a while back and last week I put it to use and this absolutely works..I've done it without before and always had the slick spot I'm guessing resin seeped through. I'm so glad I stumbled on your video. Thank you!

[@ResinBelle]

I'm so glad to hear you had a good experience with this technique! Thanks for watching!

[@susanleader-grace7892]

Thanks so much for your tutorial on how to seal paper into resin. I want to create some coasters for a friend of mine with some pictures of her favourite places she has travelled to and this will be perfect! Thank you, thank you, thank you!!!

[@ResinBelle]

Oh that will be a lovely gift

[@missvickie1975]

You can also seal your paper before adding it to your project after the sealant dries, so u don’t have to worry so much about getting a really good seal between the paper and the resin, since the images itself is pre-sealed.. I like Liquitex matte medium for sealing.

[@ResinBelle]

Thank you for adding your knowledge so everyone can try a different method. I have done it this way but have had trouble a few times when part of the paper floated and part didn't or it slid to one side while I wasn't watching lol. Slippery little things.

[@jenniferslade5232]

You mentioned photos, would you do this exactly the same way? Your coasters were really lovely xx haven’t seen you before, but have now subscribed xx

[@ResinBelle]

Yes same way. I have used the same technique for many different kinds of paper including photos

[@AMEH916]

Beautiful work! Thanks for the amazing advice.

[@emdee7744]

Thank you so much for the detailed instructions. Great video!

[@DatGirlAlicia]

Thank you for the video. I was freaking out about not having a cricut machine.

[@gwen-myahrobinson5975]

Me too!!!!

[@surfandprotect]

A laminator works amazing too and it is pretty inexpensive

[@christinalewis1806]

Same here!!!

[@_miravnm_]

Same here but you don’t need expensive Machine to make Resin

[@surfandprotect]

@@_miravnm_ true :)

[@digitaldarkroom07]

I use a laminator, it never fails! 👍🏻👍🏻

[@robira1313]

To do what?

[@Pattycake85]

That’s what I do, easiest and fastest way to seal paper.

[@mathissmith2007]

After laminating, what do you use to use it on the coaster, or just pour more resi? TIA

[@tynettewilliams9517]

Omg you got me in overdrive at Amazon I just added resin items to my business can't wait to try this u explained so well thank u!!

[@prakies75]

OMG! Thank you soo much! I'm going to try my hand for the first time and your information is soooo valuable! Thank you so much!

[@user-dn9vd9xg9p]

Question please .. when the tacky glue is only painted on the image and extends beyond the image not across the entire coaster where the image is.... does it not show the glue streaks on the completed project?

[@ResinBelle]

I don't see them when there is a color background. You may be able to see some texture when the item is completely clear but I'm not sure. I have done any on clear before

[@RiahAriel]

Thank you for sharing your tips! I have been struggling with removing the white computer paper background that some images may have once I print them. Even if I cut the image out as best as I can there are still parts that my scissors cant reach leaving the white computer paper incorporated in my piece. Any tips from any resin artist would be much appreciated!!!

[@StefanieFournier1978]

Some ideas: use a craft knife instead of scissors. If your image is graphic and outlined, make a wider stroke so you can cut into it. If not, make a softer, faded edge on your image, maybe graduating it into the resin color, so the trim blends in. Or you could do that after printing, with a marker or pastel or something. :)

[@nickijaycox7773]

Those came out beautiful 🥰❤️ Thank you for sharing

[@debbieberryhill91]

Those are adorable. I just happened across this video at the same time I was getting ready to experiment with putting paper under resin. This was a God send and has save me days of having to work this out on my own. Thank you for sharing this!

[@ResinBelle]

I'm so glad I could help!

[@ssyed7321]

How long do you let it cure before adding the back layer

[@marlenigomez4963]

This was an awesome tutorial, thanks so much for showing the process step by step. I wanted to use this to turn my stickers into keychains and charms and will be using this with my sticker paper and just higher quality printer paper. I have a question though. I see that you're mixing and handling resin without any safety equipment, and have been worried about using resin for the effects it might have on crafters with years of possible handling and inhalation. Have you run into this issue? You obvi are a pro at using the resin but for a beginner would you recommend using some PPE like gloves and a mask? I always worry and have heard other KZbinrs warn about the dangers of long time work with resin. Thanks again for the tutorial, it's awesome 😎

[@ResinBelle]

Hi, thanks for watching. I do recommend ppe. In some of my older videos I didn't wear gloves because of sensory issues and have since found latex free ones that work for me. Resin is not especially dangerous for your health in most cases but you can become sensitized to it over time so best to protect yourself and work in a well be ventilated area, mask up etc.

[@marlenigomez4963]

Ahh hey thanks so much for the reply! 👋☺️ And ty for the tips

[@Linda-zd4ec]

Thank you for sharing as your knowledge as well as your beautiful work !

[@georginasalazar1204]

Those are gorgeous .. love that glitter

[@TheXgrl8otx]

I personally found a few better ways to insert images. One includes using sticker paper and clear sheets and inserting it into the first layer of resin so that it has a more reliable seal.

[@meshabeyond]

Keena Rosh like laminating paper ?

[@TheXgrl8otx]

@@meshabeyond its more like the old school projector sheets that teachers used to write on. clear single pages.

[@TreasuredKreations]

I tried that but it bubbles up really badly.

[@Woppaho]

Printable vinyl works too and you don’t have to seal it 😉 but this method is great too if it’s an image you didn’t print on printable vinyl

[@meshabeyond]

Say I am doing multiple things with paper can I paint with glue a few layers the top of the paper before I put it the project while I’m waiting for my mold to dry and then when my mold dry do it like that to ensure a good seal ?

[@ResinBelle]

You should be able to do it that way. More glue never hurts

[@carolineyoung2029]

Do you let the back glue dry before sealing the front please

[@xenomorphdragqueen]

Very helpful video, thanks! I wanted to start adding collage work to my resin pieces but didn't know how to make it work. This is very informative.

[@ResinBelle]

Good luck! I hope everything works out!

[@Aaron84danielle]

Thank you for taking the time to do this. Happy New Year!

[@JustJoNailAddict]

Good idea, I laminate mine then pop them straight into the resin x

[@secretsquirrel7374]

I have done the same but it still seeps in around where I cut it.

[@AstraRoseYT]

secret squirrel tip from an ex teaching assistant who had to laminate a LOT of paper...always cut the paper shapes out first before laminating, you are less likely to have gaps as it complete encases that piece of paper, and it also means you can reuse the paper for other things so less paper waste too!

[@mymai2792]

@@AstraRoseYT Hi ...I'm wondering if I laminate only 1 side of my pic/image, maybe I only have to glue the paper back side of pic to the set resin. Then I can pour new resin over top?

[@AstraRoseYT]

@@mymai2792 you can’t laminate just one side of your paper as it goes into a pouch for it to be laminated

[@mymai2792]

@@AstraRoseYT Yes you can. Watched Teatime N Dolls Channel... & Positively Papercraft Channel yesterday. They've done a number of items by putting 2 pieces of plain paper in between 2 sheets of patterned paper in a laminating pouch. It's fascinating. Bit of a game changer with the new matt pouches too. I've got the pouches but I have to borrow a laminater.

[@MileyonDisney]

That glue is available at Dollar Tree for $1.

[@susanleader-grace7892]

Oh, that is a good tip--thank you!!

[@themostcraftynurse3914]

Modpodge works also, I’ve not had a problem ever with it. But I also do two layers and let it dry completely

[@diamondstouch]

Yeah but not cost effective, it's only like 1oz

[@MileyonDisney]

@@diamondstouch Do you work for CNN, providing such gross misinformation? I just looked at my bottle. It's 3 fluid ounces - quite a BARGAIN!

[@LovinglfDesigns]

@@MileyonDisney I've always seen crafts as an area we can come together and just have fun. No need to inject politics. All that needed to be said was that your bottle from the Dollar Tree has 3 ounces. The bottle is small so it's not surprising that someone would think that it had less. I doubt they meant any harm.

[@akwilson25]

Thank you so much! You have no idea how you saved my life from frustration and stress as well as my small startup business! You're the very first video I've watched and wanted to subscribe to as well as pay for! So thank you! Thank you! Thank you!

[@silverandshawanafamily5530]

Love it just starting out on my projects

[@kiannabarrow5180]

These look amazing😍. did you use normal printing paper ? I've tried using printed art in my resin before and it always made the ink run.

[@ResinBelle]

Yes it's just regular printer paper and inkjet printer. When doing this technique it's pretty important to allow your print to dry thoroughly before you heat set it. Otherwise it's like sitting on a freshly painted bench. After it dries and it's heat set the glue will seal the ink so the resin doesn't soak in

[@tinamrankin1154]

Thank you for asking this question

[@annamarierotondo3394]

@@ResinBelle I can use this process for actual photographs as well, yes? First time I used a varnish, painted on, and it worked perfectly! Second time, not so well. The ink just faded away within 2 minutes. I think I only put 2 coats, as opposed to the first time I put 3. But, I'm still a bit leary.. 😳 This seems sooo much easier!! Please help.. Lol, thank you in advance! 🙏

[@ResinBelle]

@@annamarierotondo3394 you should be able to use this process for photos. Always good to do a small test before doing a big project to be sure.

[@annamarierotondo3394]

@@ResinBelle Thank you so much for responding, I'm still sort of a newbie, lol, so I truly appreciate your help! 💖

[@biancacastaneda61]

does it have to be that glue brand specifically ?

[@ResinBelle]

You can use just about any glue but I have found this glue to work best. With other kinds of glue you will need to do some tests to see how many layers you will need to add for best results

[@shianewiley933]

Thank you so much!! I have never done anything with resin. I got interested when I saw a video of something someone made and I fell in love with the Final project. Thank you for showing a beginner how to do it.

[@ResinBelle]

Thanks for watching!

[@dlander40]

Luv It. Those are so beautiful. Great job. Im taking all my notes from you from here on out. Im tired of wasting and ruining materials.

[@melimel9265]

do u sell your coasters without your logo on the front? I'm really interested tfs

[@ResinBelle]

I'm not yet but do plan to add some to my Etsy shop once I get the chance to make some lol

[@awkwrrrdlytee6178]

I do.

[@KP-nx8lo]

I’m pretty sure I was a raven in my last life, I love shiny things! I can be walking and talking with someone, then see something shiny and get completely distracted lol 😂

[@ResinBelle]

No joke lol

[@jezabelledb5556]

Ah thank you for this! I had tried the Mod Podge method and hadn't had much success with it. But now I know why! So I'll definitely give this a try.

[@mookzmom]

Excellent! I'm glad I didn't invest in too much mod podge, and that I have plenty of tacky glue, because I do miniatures kits! You are a treasure!