Side Rail Bed Repair | A Day in the Workshop

[@bloodi1235]

Won’t lie, I came to judge, left impressed

[@Gunz4President]

s1ash_ | As long as you left impressed. 😎

[@jeffmayrand1058]

Great Job! Thanks for posting this. Need to do this as well.

[@Gunz4President]

You're Welcome.

[@calvinjackson8110]

Always wanted to be able to do things like this. Never learned and was always a clutz and a dummie with tools at an early age. Never had any confidence about being around tools. Watch you do this is so discouraging to me. Greatly admire your skill.

[@Gunz4President]

Thank you but don’t be discouraged. There was a time when I little to no experience around tools either. We all have to start somewhere ! With a little time and patience you can learn you.

[@WSRWSRWSRWSR]

Thanks Tommy. I'm definitely going to copy this work. God bless

[@Gunz4President]

No problem and God bless you as well.

[@susanleonard1621]

Thank you 100%. You have addressed my issue.

[@elmosdady1973]

Great video, just finished mine, looks badass

[@Gunz4President]

Thank you, and good job as well.

[@kenhdog]

Need to repair ours. Picked up some fastner tips. Thanks!

[@donnelljunior4198]

THANK YOU

[@skao3816]

AYY THE LEGEND IS BACK

[@Gunz4President]

Wuulfeez On 60fps | Thats right, with a shit load of content. Hope all is well. 😎

[@skao3816]

Tommy Arrington all is well over here hope everything is amazing over there and stay safe bro

[@Gunz4President]

Wuulfeez On 60fps | Good to year and will do bro.

[@derrickfranks3737]

Great vid. My woooden side rail snapped in half but the bed has a grayish, brownishh swirly flooring look to it. Any suggestions on repair?

[@amir990level2]

Excellent work bro.

[@Gunz4President]

Thank you brother.

[@poisonspegetti9353]

hes back

[@Gunz4President]

Poison Spegetti | And better than ever. Gotta shit load of content coming your way, stay tuned. 😎

[@Shortyb1977]

I just need that side pice attached back. I believe my wood slabs are a bit heavy for it. Please suggest wood glue and stronger screws!

[@Gunz4President]

The side piece that that slats rest on, on both sides ? If so, your standard interior wood glue will do just fine. As far as wood screws, measure the thickness of the side piece and side rail and what ever that measurement is, get wood screws slightly under or close to that measurement.

[@FMarie-po4mh]

How do you put the slots in the headboard so the rails will fit? Great video. Thanks!

[@Gunz4President]

Are the slots not already routed in the headboard ???

[@FMarie-po4mh]

The headboard and footboard has 2 holes. The rails have 2 round circles with the bolts inside the circle that screw into the head and foot boards.

[@Gunz4President]

@@FMarie-po4mh | Ah ok, I understand now. I've repaired beds with this setup as well. its possible, that said I'll need a picture to see how yours is damaged to walk you through the repair.

[@darrickpotter4246]

Ok he’s baaaaaaaack! You should voice it over so we can learn!

[@Gunz4President]

Darrick Potter | Thats actually a good idea bro, next video for sure.

[@joimh941234]

Hello I recently found a full size bed but it doesn’t have the size rails. What are all the supplies you used? I don’t have a saw would Home Depot be able to cut the wood like you did in the video?

[@Gunz4President]

They would able to give you a rough cut, which is close to what you need, but more times than not, not as precise as you want so you’ll need your own saw to get them to exactly the length you want. That’s goes for both, table and miter saw. Grab some 1x’s at 8’ some 2x4’s and a box of wooden screw. You’ll also need wood glue, and at least a drill to drive the screws through. Pending how these side rails are connected to the frame, mounting hardware is required as well, but you’ll have to order that over the internet unless your local hardware store sales it. Hopefully this helped.

[@MrsDom8181]

My new bed didn’t come with the inner piece you glued on so I’m wondering how to add that myself. How do I know what size screws to use so they don’t come out the other side but will go in enough to hold?

[@toddharshbarger8616]

How did you match that stain?

[@JoeyGarcia.]

Hello. I have a queen size bed rail,, but Need to make it fit a full size bed,, would it be too difficult to cut the desired length off for example the foot side of it and then reconnect the metal hooks?

[@Gunz4President]

Sorry for the late response but the dimensions are completely different. Queen size mattress dimensions are 80" Length x 60" Width and the Full size is 75" Length x 53" Width so even if you cut the length of the rail by 5" it still wouldn't be a perfect fit width wise. That said, if you don't care that the width of the frame is 7" larger than the width of the mattress then yes. its possible.

[@izyyz999]

Idk if you can help me out but the thing that hold those thing it snapped idk if I can fix it like the thing that hold it cracked idk if you can make a video

[@Gunz4President]

If it cracked, you’ll possibly have to recreate the entire peace just how I did in this video.

[@theproducersrealestategroupinc]

My hook rails aren't broken its the internal piece that supports the hooks in the headboard... how do you fix that?

[@Gunz4President]

That's a much more difficult job, but still possible to repair, providing the material is actually wood but if not might be time to purchase a new bed. But then again, I'd have to see some pictures to be sure.

[@dummgelauft]

Did you use an "appearance board" to do that?

[@Gunz4President]

No I used regular 1x5 pine board.

[@ethanthebuckeye3060]

Poppin

[@Gunz4President]

ethan the buckeye | 😎

[@ethanthebuckeye3060]

Whats poopin king just uploaded

[@Lemon_L3x]

Satisfied

[@toddratka9693]

Great repair video, thank you, but never, and I mean NEVER, wear gloves when using a table saw. I was tensing up watching you. So dangerous!

[@Gunz4President]

Thank you for the compliment and tip, Much appreciated.

[@divadgnol67]

Reduce, reuse, recycle Way yo keep stuff out of landfill bro.

[@Gunz4President]

Absolutely bro, every scrap piece serves a purpose.

[@oldarkie3880]

That pine is too weak for this purpose.

[@Gunz4President]

Possibly, but it was for a child’s bed, still holding strong until this very day.

[@dtvertex6996]

BLM