SIEMENS LOGO -ANALOG INPUT SCALING AND CONTROL 0-10V

#automation #plc #plcprogramming #motorcontrol #pump #schneider #zelio #siemens #controlwiring #siemenslogo #sensor #pressuretransmitter #pressure #0-10v #analog #4-20ma #0-20ma #switchgear
siemens logo PLC analog input 0-10v scaling and control for pump
auto pressure cut in cut off.

[@naimhasan2877]

Wow.Very good presentation brother.Give us more video as like this Video.

[@sennapparajan.p]

please watch my other videos in my list...it will be useful...

[@naimhasan2877]

@@sennapparajan.p Thanks for reply.

[@naimhasan2877]

Thank you for your great tutorial.

[@pavmybox]

Smart man. Thanks!

[@ponsukpodsuwan]

Thank you 🙏

[@sennapparajan.p]

You are welcome

[@manilakshmi88]

😭 ji, why you don't do any videos?

[@sennapparajan.p]

WILL UPLOAD SOON

[@aligulec1305]

Thanks..

[@Bond__7]

Sir I want to use this logic for 2 gas detector (0-10v) and operate 1 sov through both detector when value reach to high.

[@sennapparajan.p]

you can … want I can do for you ?

[@fromplutotoearth]

Hi there. Is it possible to make the 3 bar and 7 bar as variable where operator can change the value when they need to, by just pressing on Logo or TDE without touching the ladder program?

[@sennapparajan.p]

Yes possible By pressing keys on logo

[@MrHumbleP]

Can you control the pump using hmi connected to logo?

[@ahmerraheel3198]

Hello sir how are you ? Sir I have analog input of 0-10 V and I want to send corresponding output analog signal 0-10V to a device. How do I go about doing this ? Please help thank you

[@sennapparajan.p]

kzbin.info/www/bejne/boKagnuAhqqiaqM please go through this.... any doubt please mention...

[@asifiqbal5346]

Can you please describe on ladder logic

[@sennapparajan.p]

Hi thank for your feedback.. Kindly follow the link the video is made for you.. kzbin.info/www/bejne/roWmenp7hrlln9k

[@rameesalivtr]

Hi brother, If we need start the pump from Zero bar to 7 bar then cut off, then again start at 5 Bar. How we can make programming. Please help

[@sennapparajan.p]

it is there in my videos check in plc programming play list

[@nikkorogelio297]

wow.. clear explanation, what is your facebook account so i can ask you a few question about siemens plc prgramming .. thank you from philippines

[@sennapparajan.p]

sennapparajan ponmoudi you can write here also... thank you for your valuable feedback..

[@jhericodaaco2034]

@@sennapparajan.p can i Put analog out put of the inverter to logo ?

[@sennapparajan.p]

@@jhericodaaco2034 hi... yes.... you can put put it... you can connect to logo with any source of analog signal ...

[@jhericodaaco2034]

Can You make a full video

[@sennapparajan.p]

@@jhericodaaco2034 ok what you want to know exactly ?

[@tejendrakunwar2549]

Brother, I want to control weigh scale through siemens logo connect with load cell. is it possible?

[@sennapparajan.p]

if your load cell output is 0-10V OR 4-20MA then yes it is possible.

[@alpaslanarabaci311]

if your sensor output 0-10 Vdc or 4-20 ma its possible.

[@tejendrakunwar2549]

@@sennapparajan.p Brother, my weigh indicator is giving 0-10 v. but I need to control 3-4 out put with that. is it possible by logo PLC? like i need to use different type of material in one scale.

[@sennapparajan.p]

@@tejendrakunwar2549 Hi bro.... i understand u have one analog input with 0-10v and you need to control more than one output with one input.... right? yes it is possible you can use analog threshold trigger blocks and you can control multiple outputs with single input...

[@hemantpatil5462]

Is move instruction used in logo plc?

[@sennapparajan.p]

No dear...

[@hemantpatil5462]

@@sennapparajan.p any other way?

[@sennapparajan.p]

@@hemantpatil5462 what you want to do ?

[@hemantpatil5462]

@@sennapparajan.p I have one question can we set the current setting in AI

[@hemantpatil5462]

4mA to 24mA