Siemens LOGO TDE display panel communication with LOGO! 8 SF4_1 smart relay. English

Siemens LOGO TDE HMI communication with LOGO! 8 SF4_1 smart relay. For manual, related videos and part numbers please see below.
Programming software: LOGO Soft Comfort V8.2
Siemens LOGO! 8 SF4_1 program upload/download, password reset using LogoSoft Comfort V8.2: • Siemens LOGO! 8 SF4_1 ...
Logo Soft Comfort 8.2V programming/help manual: support.indust...
Patreon services: www.patreon.co...
Website: igselectronics...
eBay store: www.ebay.co.uk...
Linked in: / ingus-sudints-1b2a2517a

[@debihsofiane3229]

Thank you

[@valentinaselektrikas]

Good vid. Why there is no LOGO TDE in network view~ 5:04 ?

[@ahmedsami2270]

What solution of spi test ok on ?

[@fahad_7737]

Could u explain how to connect proximity sensor with logo ?

[@ahmedsami2270]

What meaning spi test ok??

[@abhishekjain0]

Can I use digital input I7 and I8 as an analog input. If yes than please make a video on it.

[@007floppyboy]

From the 'network view' right click on the logo. This brings up a new window 'Offline and online settings. Click on 'Offline settings'. Go down the list to 'I/O settings' and click on this. You now have the option of 'Onboard AI settings'. Selection 2 (Enable 2 AIs), click this option, Select which type you want, 0-10V or 4-20mA. now press 'OK' at bottom right screen. Input terminals I7 and I8 are now Analogue inputs.

[@retro5700]

it doesnt let me connect with the logo for some reason, i put in the same ip adress and network cable is also connected to the logo

[@IGSElectronics]

Its usually to do with subnet. Make sure your laptop IP address firs 3 group numbers are the same as LOGO.

[@walidelmadih1385]

can I added analog module in logo plc?

[@007floppyboy]

Yes, simple off the shelf parts, just pug into the logo. However, logo do come with analogue inputs, but you loose a digital input for each one you configure to Analogue

[@paulobella7160]

Quando fai i tuoi tutorial ,devi parlare più lentamente , perché è difficile seguire e capire . Grazie

[@corese75]

Hi, I wanted to comment the exact same thing. I'm working with brits for 20 years now but this is a top 3 contender for being hard to understand. A bit slower and clearer please because the vid is very interesting!