What is New in NX | December 2021

[@devarshivyas]

Proud NX user, always knew NX will be one stop solution for future.

[@devarshivyas]

@Jazzmaster Jay Good question. i have hands-on experience of Catia, Solidworks, Solidedge. There's no doubt Solidworks is used friendly, it will be lie and stupidity if one don't accept it . I'm not fan of any CAD but i think NX had more functionality [ it may be cause i've used it rigorously ] . You can correct me if I'm wrong

[@petermarin]

We’re excited to see you!! Hope this goes well, Siemens team!!

[@ammarbarbee3180]

Hey Paul at 21:11 it looks like the optimized part is colliding with the engine gearbox... looks like you might have go back and run thr topology optimization again with new conditions.

[@RandyMcNurlin]

At 27:09 I think Ashley summed it up. This whole process turned an inexpensive sheet metal component into a real expensive door stop.

[@RyanR3STL3SS]

Which product/role has this feature? e.g. Core Designer, Advanced designer, etc

[@RyanR3STL3SS]

@Paul Bevan That is confusing. "value based token licensed applications" and "Mach Bundles" are your internal jargon and don't mean anything to potential customers. Sounds like there are three ways to get it, but it isn't included in any base packages? Maybe it would make sense if I already used NX, but I don't.

[@RyanR3STL3SS]

@Paul Bevan Got it, thanks! Is there a trial that includes Top Op I can download and install?

[@MrZjarko]

and what about the incorrect display of the reaction list? The resultant still adds up instead of the sum of the squares?

[@berternieartist]

26:30 Ashley might of made a mistake here. He selects the EOS printer rathere than the Renishaw printer. Hahaha!

[@id.dentsusoken]

Let's see how it looks like > the New "NX Topology Optimizer"

[@jithoshbabu3985]

topology optimization to its next level....😍

[@JewelerAR]

no in this way is mess

[@marimuthud4500]

Very Useful chapter in NX Thank you

[@SoubhanAlah-i6k]

whats version need to learn for begining 2007 or 1980 or1953 or Nx12

[@SiemensSoftware]

The best way to get technical support for our products is to reach out via our support page at sie.ag/3IiXY96, Opening a support ticket via our Support Center ensures your question is routed to the correct technical support resource.

[@jobsmine]

Where do I download NX for mac? I want the actual version, not a web-based one. I can't see the cost nor the download link. Help Please.

[@SiemensSoftware]

Hi - For your specific question, we recommend you open a support ticket so that the right team can help you find the NX version you need. Please request help at sie.ag/3RD4ZnX.

[@karama5478]

Hi, is there student version of nx?

[@JamesWilliams-oi5rz]

Any new VR features?

[@tiaportal]

I love this product .

[@harshchavan8123]

whats the version number can anyone please tell me that is released in 2022?

[@tiaportal]

If I can using in my project it will be fantastic

[@ivanvecchio3973]

Did the printed bracket look good?

[@kopeezie]

no it interfered with the drive block. HAHAHA

[@billmaster17]

Lets goooo!

[@soundararajans8920]

What is the Nx cad new vision?

[@annakquinn7084]

2007

[@soundararajans8920]

But nx 12 good or

[@kopeezie]

yoy... every new feature in NX makes the user experience worse. why did they f' the constrain system 2-3 years ago? They keep adding stupid features that you never use and never fix the ones that you use the most. And when they do touch the ones you use the most, they make it even more difficult. Also the PLM integration with Teamcenter is also a massive pain. at least teamcenter (rich client) by itself works very well (which is probably because they dont screw with it).

[@kopeezie]

I highly doubt those reviewers that blow smoke up their a## actually use this on a day to day basis.

[@kopeezie]

Perhaps, Lets see... what would be the first thing that I would love to do immediately after dropping a dimension down onto my sketch? perhaps allow me to give the dimension a number? I mean after all, I just love defining dimensions, only to let the float around in space. Pro-e solved this years ago, and NX had this solved as well... if you want immediate cancel, press the middle button... but no, easily the most used features to speed up productivity gets removed only to cause my blood to boil every damn time I am forced to use NX. I have emotional trauma to the extent that I will avoid using NX as much as possible and seek to solve things with other solutions before attempting to run this program.

[@donaldduck5731]

3D sketching yet?

[@fonwoolridge]

Impressive stuff!

[@crokatron]

This is great, but what we really need now is Tab and slot functionality, it will be very many years before heavy vehicles are 3D printed and an not fabricated from plate steel.

[@petermarin]

Why are they referring to this as NX 2007?

[@petermarin]

@Paul Bevan Thanks for the reply - now I get it!! Strategy Consultant here - we normally charge for this kind of recommendations, but this is for free: ditch that counter in favor of something that looks less like a version of your software is from 2 decades ago (especially since you want to espouse modernity and even your Solid Edge software reinforces that convention with its Solid Edge 2022). Perhaps start with 1, 10, 100 - even better: 2022.1 and 2022.2. By the way, great update!

[@petermarin]

@Paul Bevan haha my pleasure!! 😀 If you struggle with the "stakeholder management" for this change, let me know - executive decisioning is my jam!!

[@munshisaiful7987]

What is this version?

[@munshisaiful7987]

@Paul Bevan drafting model Solidworks better than Siemens nx...more features to be added

[@munshisaiful7987]

@Paul Bevan No...3d to 2d drafting part convert...Auto dimension not available... solidworks one click problem solving

[@munshisaiful7987]

@Paul Bevan 3d model material apply texture properly not show when 2d drafting time as a default colour show .What's the reason?

[@Bizlearn_Siemens_NX_Training]

Love it 😍

[@sunilas5365]

Go go goo.

[@tiaportal]

Beautiful

[@HK-yo4se]

So NX finally has features other cad applications had for years. I look forward for the license cost 😂

[@HK-yo4se]

@Paul Bevan -> generativ design, CAD CAM integration

[@berternieartist]

UGS is king. And always has been!

[@HK-yo4se]

Whatever you think is true. and if you only ever used UGS. I'm happy for you.

[@fatman2876]

Don't forget adding "Rename" back in to right clicks

[@kopeezie]

overpriced same features year over year slowly being eroded to the point that it is painful to use... and then charge a hefty license fee.

[@MrNams]

Cool #mrnams

[@onkarsingh5436]

Great..

[@hameddesign70]

this software is too expensive that normal people can't have it

[@MrNams]

But once you buy and learn it, then you will definitely enjoy and accomplish your work easily and get return on invested. #mrnams

[@hameddesign70]

@@MrNams how people can learn it when they can't buy it ? thru youtube ?

[@MrNams]

@@hameddesign70 😛😛😛

[@gryn1s]

​@@hameddesign70 its not intended for hobbyists, students, and especially, "people". You have to be a professional. that is, to truly learn it, you must work on it full time. for years. in a company that has resources to manufacture the designs.

[@paulklement4274]

@@gryn1s To be fair they work with some universities and make licences available for students, not sure how expensive that is for the university tho

[@markvwood2007]

I would have like to have seen that part manufactured, installed, and tested. It looks like garbage. I think you would be fired if you said, "Here's that mount you wanted". And how would you ever prove that it would work beforehand. The calculations are hidden in the software processes. Kind of a black box. King's New Clothes?

[@pengli8446]

good

[@kopeezie]

Or perhaps fix... "Cannot trim with the limit face. The extruded body may not completely intersect the face." Its a box... I just want the new walls of the box to come flush with the box. f' sakes.

[@SterianAlinaNicoleta]

Sooo many years 2009 shit man

[@denisekowalski937]

I see Not a Car!!!!!!!!!!