It is the first high capacity Sig in 10mm, it has an unbelievable recoil mitigation system, I had the pleasure to shoot a little over 50 round during Sig Freedom days in AZ early last month, it is a great gun!!!
@62dobie2 жыл бұрын
@@mrjones4249, are you in Washington state?
@mrjones42492 жыл бұрын
@@62dobie yes
@1014p2 жыл бұрын
There are a few high capacity 10mm. Springfield and Glock are starters. Smaller gun makers have offerings as well but are not commonly seen but quite reliable. Issue here is brand blindness to a few makers. I forgot to add S&W came out before SIG offering. SIG, HK, and Keltec are last to playground. The latter two MIA.
@utahedc4472 жыл бұрын
I would hardly consider 15+1 “high capacity” but I recognize that other 10mm offerings don’t have 15 round mags so I think I see your point.
@TheRealZJE3132 жыл бұрын
Far as recoil that's because it's a 5in barrel
@markdilisio936 Жыл бұрын
A guy I know teaches at the Sig Academy in N.H ,I wanted a 10mm so then my option was SigsP220.I wanted it badly but was told to wait,I have the P320C in 9mm,380 ,sig .357,and .40 cal.i love my sigs ability to switch calibers and the modularity,easy to clean and is my EDC.Im glad I listened and didn't buy the Legion in 10mm.ill put in a better trigger and springs etc,a nice optic and a good reloading rig for 10mm,5.56,9mm,7.62,and shotgun. I can't wait to get mine.
@michaelphillips57862 жыл бұрын
For me, your channel is one of the absolute best gun review sites on utube . Thank you so much for putting in the time and effort, it's been a great help to me.
@Perry21862 жыл бұрын
I want to know if the aftermarket will support the magazines In carbines for the sig to have a cross compatibility between a carbine and a pistol
@cliffbarnhouse491310 ай бұрын
Nice review. Just a fun fact for those wondering. An X10 upper will work on a .45 acp P320. I've had a P320 in .45acp for years. I found a complete X10 upper a little while ago so I got it, and a couple of X10 magazines. Works great.
@user-ic8xi6fy5x2 жыл бұрын
Extremely informative, It will be my next handgun. I have always liked Sigs and owned quite a few, never been unhappy, I've sold two and although I have no use for them anymore I miss each one I've sold.
@wxexw2 жыл бұрын
Thank you for the holster information! Excellent to know. Been a long unanswered question, and I was not interested in ordering hundreds of dollars of 'doesn't fit' hosters.
@rogeroverbay4819 Жыл бұрын
Just picked one of these up at my LGS. Took it to the range and it performed flawlessly and dead accurate. Love my new Xten
@natejackson47912 жыл бұрын
This is an excellent channel to see new products and accessories. Thanks for all you have done.
@andygluehere8266 Жыл бұрын
I have both 10mms also, but my glock is a gen 4 so it has the beaver tail ext strap. I like both, but prefer the Sig slightly. My only hang up is the availability of spare mags for the Sig. But you should definitely clean the Sig first, and load an unload the mag a few times .
@GoatmanSam2 жыл бұрын
Thanks for the holster info - not a lot of reviews talking about it yet
@mrzrog2 жыл бұрын
One of the things I noticed, with the weights of the gun, you had different ammo in the magazines. Unless they are the same weight, that could contribute to the weight difference.
@KeanonGilliamSlang3692 жыл бұрын
Nice review. X-Ten is on my list. Hopefully carry size.
@TMS2020 Жыл бұрын
I just found your channel and find it very informative and interesting.
@TwoFeatherChannel Жыл бұрын
another plus for me in Sig 320 series is the larger amount of room inside the trigger guard over the Glocks and the metal trigger shoe my finger drags across the inside of trigger guard on my Glocks but not my Sig 320 and I change all my Glock triggers to triggers with metal trigger shoes, I don't like the feel of plastic trigger shoes
@DeanPatterson-j9q11 күн бұрын
The worst break in period I had was with a R1 Remington 1911 style. I shot at east 500 jamming rounds, then they disappeared. Never had jams or feeding problems anymore. Clean em (all) good at first and be Patient. But on a 10mm , you may ? need to put a heavier guide spring with the heavy bear loads.
@Secretsquirell97111 күн бұрын
just bought the xten, i guess they hooked me up with an extra mag, because i got 3 of them. after taking it to the range i though to myself "now this is a gun" and made it my edc. I'll never start a fight, but i damn well will finish it.
@Maxvicious22 жыл бұрын
I believe the M&P 2.0 10mm would be a good comparison as well as the Glock 20 , just sayin
@alanmeyers39572 жыл бұрын
M&P is not as strong.
@charleschristianson27302 жыл бұрын
I got the M&P and I'm gonna sell it. Doesn't run hot loads.
@wolfnstrings2 ай бұрын
I have to report that the X-Ten with the HKP Comp is a joy to shoot. It reduces recoil to a slight wobble.
@AdventureSMBW2 жыл бұрын
You are not the only person to have a couple of bad feeds in the first 100 rounds and then good after that. I think thatll just be a break in thing with this gun
@jeffwilliams34362 жыл бұрын
Yeah it’s almost always break in period on the magazine. New sig mags are always kinda stiff
@MrAyybee2cold11 күн бұрын
@@jeffwilliams3436I just got one and I was wondering why it was so stiff. Guess it has to set.
@ttravel94432 жыл бұрын
Great video, man! Good info, nice flow. Please consider using a mat or something to stop the thunk sound every time you touch the Sig or put down a mag. Keep up the good work.
@kingbaldwiniv54092 жыл бұрын
Good to see my Scottsdale Gun Club in the video! My first 10mm was a gen 4 G20, which was a massive disappointment. It had function issues, an underweight recoil spring, a wonky backstrap, and poorly supported chamber among numerous other inconveniences. Robar did a lot for me with that pistol, but it more than doubled the price. I have shot several 1911s in 10mm, the XDM line, Tanfoglio Polymer Match, and a few others, and the stock G20 was easily my least favorite of the ones that cycled properly. Sig indicated that the Xten would have frame compatability with the .45, I hope so. I have a .45 frame and would like to see if it works with it. Right now, my favorite 10mm is my Springfield TRP Operator 6". It is a track driver! I am excited to compare shooting that great looking Sig, the S&W M&P, and the XDM Elite.
@meandmyRC99 Жыл бұрын
Great review!
@wildmanjeff422 жыл бұрын
next on my list thanks for the video !
@bluesteeltraining6 ай бұрын
Thanks for a great and informative review! I recently picked up my new Sigg Sauer, P320 X 10 compact, and I love it! It shot great right out of the box when I went straight from my dealer to range. I actually shot better with the P320 than I did with my IWI Masada 9 mm. The P320 X 10 comp is now my every day carry.
@user-ip1mj8su9d6 ай бұрын
What holster did you go with? Do you feel the difference with the comp slide?
@winwithgrn Жыл бұрын
To be correct this isn’t sig’s first ten millimeter. It was the p220 legion chambered in 10mm. This is their newest option in 10mm.
@mikea40742 жыл бұрын
Hopefully a 6" and a sub/compact will be in the future
@monster68802 жыл бұрын
No need to panic on how to get fire arm targetgun gat you covered He has always been the best plug
@BobbieJuanKenobi2 жыл бұрын
"Nailed it outta the park" ... that's an instant classic!
@Maxvicious22 жыл бұрын
I wish Sig would make a 10 mm in the 226 platform im, a steel frame snob when it comes to 10 mm
@gregshuttleworth4465 Жыл бұрын
Same. A five inch double stack aluminum framed 10
@wolfnstrings3 ай бұрын
I just bought the HKP comp for the X-Ten. I look forward to trying it later this month. I’d love to see someone do a video review of the comp.
@BOOMER-rs5qn2 жыл бұрын
I'm hoping 10mm keeps gaining in popularity, I might pick one up if ammo becomes readily available, and hopefully at prices that won't put me into starvation mode.
@AZTrigger2 жыл бұрын
FWIW: 10mm has become earlier to find here in AZ over the past few years and for target loads (S&B) price is on par with 45 ACP.
@bigbore44982 жыл бұрын
Here’s the real problem with the 10mm. Unless you load your own ammo, or buy Buffalo Bore, you don’t get to use the potential that the 10mm brings to the table. Factory 10mm barely surpasses factory .40 S&W in performance. It’s a ripoff to be honest. Luckily, I’ve been a handloader for many years.
@AZTrigger2 жыл бұрын
@@bigbore4498 I understand your point and I am a big fan of Underwood Ammo for that reason. That being said, I have fired both 10mm and 40SW out of the same Glocks at swinging steal targets and I can assure you with most commercial rounds there was a noticeable difference in the reactive targets.
@bigbore44982 жыл бұрын
@@AZTrigger And I don’t disagree with you. There is a difference on reactive targets. It only takes around 50-75fps when shooting pistol rounds to notice a distinctive difference on steel. But factory ammo, by pretty much every measure, is anemic. Thats why you see the difference on the steel. Hornady says their 180gr XTP in 10mm is 1275fps and their 180gr XTP is 950fps. I’m sorry. But that’s abysmal external ballistics. My 180gr Noslers chrono at ~1480fps and my 220gr hardcasts chrono at ~1260. I won’t give my load data on YT. But I’m not at max. And that’s out of a 1911. And that’s why I load. Well, and the savings. I can load premium ammo at prices you can’t buy the cheap stuff for. I can load specifically for my gun. And I can get the performance that the cartridge offers. This is true for PC as well as RC. But it really shows up in the PC when you talk about 10mm and 44mag. And holy crap the difference with 45 Colt is ridiculous. For the unlearned, casual shooter, it probably doesn’t mean anything to them. They’re punching paper at an indoor range or plinking steel outdoors. But carry my 10mm (and other larger calibers) for real protection against real threats (2 legged and 4). I want every bit of performance I can get. I’m glad you mentioned Underwood. For the life of me I couldn’t come up with the name when I was mentioning BuffaloBore. Kevin would definitely be disappointed. Great company. I’ve tested their ammo in working up my own loads. I’d definitely trust it.
@styleyriley2 жыл бұрын
No better way for it to gain popularity than for you to buy a 10mm
@ShaulDawg2 жыл бұрын
So Would you rather have the Sig, Glock, M&P, or the Springfield XD in 10mm?
@xicursedcruzix62252 жыл бұрын
Good luck trying to find one but if you do and can afford to purchase one definitely pick it up hopefully since it’s a new model of gun there won’t be that many issues with it.
@bustabass9025 Жыл бұрын
Good review! Took delivery on mine a week or so ago. It is a great 10mm pistol. Only fired about fifty of my 180 grain FMJ handloads thus far, however it cycles flawlessly, and is very easy to handle. It's a valuable, well appreciated addition to my handgun collection. It also complements my other Sig, a P250 in .45 ACP. I'm curious. What states, "...limit the number of handguns you can own?!" Wanna be sure to never move there for God's sake!
@badgeralexander2 жыл бұрын
I was really hoping for a range review with a full power 10mm loads.
@AZTrigger2 жыл бұрын
Fwiw - my targets were full power loads: Underwood 200 grain hardcast
@steveturner9597 Жыл бұрын
Like mine a lot. Excellent accuracy and reliability after lots of shooting. Great trigger. Amazingly light recoil for such a powerful round; less recoil than a .45 scp and far less than a .44 mag or larger caliber wheeler.
@titaniumgreen53678 ай бұрын
If folks want a crafted leather holster, craft holsters is an excellent choice
@turbo-bike79992 жыл бұрын
Yes!!!! Nothing like a good HAMMER FIRED pistol!!!!!!
@DLG-nu9kv2 жыл бұрын
I love the 10mm best semi auto pistol round
@DeusRegum2 жыл бұрын
Hmmm... I never had the FTF/FTE issues with my G20/29 and XDM 10mm guns. But S&W and now this Sig also seem to have reliability issues. I ended up getting rid of the S&W though, crap gun. I hope Sig isn't using it's user base as guinea pigs AGAIN.
@johnleon25942 жыл бұрын
Xdm elite
@sofloflow2 жыл бұрын
As bulky as they are, my 10mm Glocks have never given me an issue. I just wish someone made a concealable 10mm. Ive been carrying a G20 for a few months & come to realize that its simply too large. I just bought a Hellcat Pro until I find a 10mm I can actually carry comfortably & trust.
@DeusRegum2 жыл бұрын
@@sofloflow Glock 29.4 or XDM Elite 3.8 Compact 10mm.
@jeffwilliams34362 жыл бұрын
He only had feed issues…which is almost always indicative of magazine break in. New sig mags can seem a little stiff. I always store new sig mags fully loaded a few days before range day.
@Roberta_Esposito2 жыл бұрын
ya , that was Glock-bashing at its finest. G20 since 92, zero issues of course
@terrytolentino54599 ай бұрын
I have that same holster. I like the quick release when drawing, compared to their push down thumb system.
@dominicbenecasa7893Ай бұрын
I just traded my Sig 1911 10 mm in for the high capacity of the P320-x10. Hope I did the right thing. (I haven't shot it yet)
@cbetts162 жыл бұрын
I will have my sig x ten in 3 weeks.... I can't wait to shoot it.... I have done my research on it, and it looks like a solid gat....
@garychapin4482 жыл бұрын
Great video, AZ Tigger. I called Sig to inquire about cleaning the Fire Control Unit in the P320 XTEN, and they said all I needed was to wipe the FCU off and be careful not get CLP or any other cleaning substances in the FCU. Please note, however, that when I shoot my P320 XTEN, it gets very dirty after shooting less than 50 rounds. Would you kindly let me know how best to clean the FCU? And what to use to clean it?
@AZTrigger2 жыл бұрын
Good question. I have been cleaning Sig FCU's since they first come out and never had a problem. Normally I use a light coat of Rem-Oil and make sure to wipe it down dry. These get pretty dirty and don't need to run wet so what Sig recommended makes sense to me. It you keep it wet after cleaning you are likely attracting more gunk into the FCU so to me at least, keeping it dry after cleaning seems to have worked well so far.
@SARDiverDave2 жыл бұрын
@@AZTrigger I've found Hornady One Shot works very well to essentially "dry lube" components. Doesn't attract gunk. YMMV.
@NicoEl119 Жыл бұрын
I guess everyone gonna say the XTeN is better than the M&P 10?
@webviking2 жыл бұрын
Sig has offered 10mm pistols for years. I own five different Sig 10mm models. This new one is their 6th model.
@AZTrigger2 жыл бұрын
Correct. I meant the first 10mm in the P320 line. My bad and thanks for the correction.
@miketyson89332 жыл бұрын
Yea all solid steel, this is Sigs FIRST 10mm as seen in video polymer pistol. 15+1 in a 5 inch barrel is a beast!
@miketyson89332 жыл бұрын
@Dale Ross Name Sigs 10mm thats polymer.....I'll wait
@miketyson89332 жыл бұрын
@Dale Ross The R1 is a aluminum and steel pistol bud, IT'S NOT POLYMER!!!! I am just waiting on my NCIS check and about a week I will have Sig Sauer's FIRST POLYMER 10mm. Thanks for showing the internet how smart you are troll
@riggerspoon85822 жыл бұрын
If you like the 10mm then try Springfield XDM Elite compact. Unbelievable gun.
@pole_barn_builder2 жыл бұрын
Just bought the 4.5 Elite. Cant wait to shoot it
@riggerspoon85822 жыл бұрын
@@pole_barn_builder the compact, in my opinion, is superior. But I like a gun to concealable so that obviously gives it a leg up on the 4.5”. But I’m hoping Sig does drop a Compact in 10mm so I can run it vs the Springfield.
@miketyson89332 жыл бұрын
Yea I LOVE mine!!! It's a beast!!! I have the Holosun 508T green dot on mine, I have the Springfield 4.5 in 10mm too so it's going to be choices, choices for me lol I may swap in the 4.5 in for this Sig IDK
@yeetergriffin15862 жыл бұрын
My dad bought one a year ago still waiting to shoot it only thing I don't like is the sights and the mag well flare but I can just take it off
@riggerspoon85822 жыл бұрын
@@yeetergriffin1586 yeah take the magwell off. Makes it far more comfortable to shoot.
@joeh142 жыл бұрын
I keep hearing malfunctions blamed on “break in”, I have over 100 rounds of various loads and bullet design with “0” malfunctions.
@badbattleaxe5832 Жыл бұрын
I think it’s a beautiful looking handgun
@GUNMETALGUYUSA2 жыл бұрын
Good Review 👍
@NZComfort2 жыл бұрын
Wonder if they are planning to make conversation kits for this one as well. It would be nice to have this with a 9mm and 40 kit
@AZTrigger2 жыл бұрын
Agreed - although based on the cost of the conversion kits to date, not sure I see the value in them...unless you live in a state where getting another serialized handgun is a lengthy and arduous task. In free states, it has been relatively easier just to buy another complete handgun.
@NIGHTSHADE314012 жыл бұрын
Not really a point when there's the 9mm and 40. P320 already. From a manufacturing standpoint it's kind of pointless also.
@willman65parish22 жыл бұрын
Great job
@dragoninwinter2 жыл бұрын
Has Sig figured out how to keep the 320 from shooting people without pulling the trigger?
@heaterfamily2 жыл бұрын
With all sig 320/365…you can add safety’s to any gun.
@AZTrigger2 жыл бұрын
Yup - good point. They can be a little tricky to add to the P320's over the P365's and you also need to make sure your grip module has the cutouts for them...unless you want to make the cutouts yourself :-) sigsauerparts.com/sig-sauer-p320-manual-safety-parts-kit/
@taronyoung57682 жыл бұрын
I wish the 320 had a grip sleeve look like the G20. That being said I will get the XTEN
@governmentcalamari97852 жыл бұрын
Bike tire tube. Good ole sf mod
@datriggr82872 жыл бұрын
It does. Check Hogue.
@PKWarchild2 жыл бұрын
just got mine and loved all the ergo on it. Have you noticed that the mag springs are VERY stiff though? I was having issues racking the slide with a full mag
@neptunetriton Жыл бұрын
They need to be very stiff for 10mm, especially when running hotter loads. Otherwise the slide velocity outruns the magazine and you get failure to feed jams. That’s what’s happened to many of the early M&P 10mm guns because Smith & Wesson used weak mag springs on the first batch.
@attilaid2169 Жыл бұрын
Hopefully they'll come out with an XCarry version, maybe even a TXG!?
@1014p2 жыл бұрын
2 or 4 legged predators, Jurassic World forecasting perhaps.
@fluffy10mmjeepguy922 жыл бұрын
10mm is the ultimate power in the universe.....🤙 I'm hunting for one of these and it is very elusive at least here in Michigan
@jacktrout58072 жыл бұрын
Congress tried to ban 10mm......but they couldn't match its power.
@videogazer8012 жыл бұрын
But will it kill a grizzly with one shot? Or will you be bear lunch?
@wpymes Жыл бұрын
Moving to a higher caliber from 9mm. Is 10mm preferable to .45ACP for range shooting and home defense? Thank you! (PS I own a Sig P320 X5 Legion so I am familiar with the ergonomics of this particular gun)
@ruebarb12 жыл бұрын
Is the chamber fully supported on the XTen? That was a major downfall of the Glock "Glock Buldge", always had to buy a $$ new barrel if you wanted to reload real 10MM, 180Gr ~1380FPS
@bonitahalpern54242 жыл бұрын
Good question? Bought a KKM barrel to do the same with my Glock
@ruebarb12 жыл бұрын
@@bonitahalpern5424 I had done the same KKM, lone wolf barrel was crap, made the glock 40MOS a jam-o-matic
@sofloflow2 жыл бұрын
Good question
@southfork67 Жыл бұрын
It is actually more supported under the feed ramp than my Dan Wesson 1911’s in 10mm. I literally had to buy the Sig to find that out since nobody talks about it.
@franknapolitano9144 Жыл бұрын
I would like to see the 320 AXG Pro model in 10mm too.
@matthewkidwell433411 ай бұрын
Just got a X Ten! Can't wait to get a Romeo 2 and Surefire X300 Turbo put on it and hit the range!!!
@Okraknife Жыл бұрын
I like mine, but additional magazines are pretty expensive
@niswii2 жыл бұрын
Do we need a custom holster or is it the same specs as a full?
@niswii2 жыл бұрын
RDR makes the custom holsters.
@justinkase1360 Жыл бұрын
Can the XTen take a safety or be fitted with a safety FCU? I wish it had barrels and conversion barrels available, comps. Maybe it will eventually. I don't expect it will ever have the aftermarket Glock has.
@thomasgiglia6260 Жыл бұрын
Look up ab prototype
@Frankandbeans2502 жыл бұрын
I prefer the Glock. Always reliable plus it comes with 3 magazines. Sig is also more expensive.
@beltwayjo73912 жыл бұрын
Don't make the Sig guys mad🤣😂you know how they get when you mention anything about Glock 😂🤣
@Frankandbeans2502 жыл бұрын
@Dale Ross Triggered? 🤣🤣🤣
@Frankandbeans2502 жыл бұрын
@Dale Ross You’re right. Sigs can’t even compare to how much better a Glock is! At least you’re PRO2A. 👍🏼
@PALACIO254 Жыл бұрын
I prefer sig but I'll never knock glocks for reliability or quality but I know it's a stupid reason but I just wish glocks weren't so ugly I'd happily carry a glock but they are such eye sores and in all honesty I'd rather have a 1911 over either
@barendfourie6687 Жыл бұрын
Whats your thoughts on the xdm elite from springfield armoury?
@DR6767672 жыл бұрын
Are these built better then an xdm elite? How do the triggers compare?
@62dobie2 жыл бұрын
The XDM 10mm Elite is built like a tank.
@62dobie2 жыл бұрын
@@TLhike, links to more than two, please.
@DR6767672 жыл бұрын
Springer precession is making a custom drop in trigger that comes out soon, they’ve already got a lot for it but this one is made pacifically for the elite, but I’ll probably shoot it until I break it
@ChiefDunham2 жыл бұрын
Which caliber if the GLS 578 do you have? The .45 holster is a little different from the 9m & .40 cal models.
@AZTrigger2 жыл бұрын
The 9mm version
@coles.15242 жыл бұрын
Wish I could find one
@rickgrimes9312 жыл бұрын
I wonder what longevity will be like, especially with full power rounds…
@rickgrimes9312 жыл бұрын
@Dale Ross - I wouldn't bet on that. That is why the question was asked.
@rickgrimes9312 жыл бұрын
@Dale Ross - Settle down before you have a stroke. Glocks have been around for 40 years and have proven their reliability over and over again in that time. Like it or not, they are the standard that others are compared to. SIG releases a similar pistol in what is a brand new, unproven platform and it is natural and reasonable to ask the question. If you have an emotional reaction to that, that means you have no faith in your answer that it will last. I have used Glocks in law enforcement for a number of years. I have also used my 10 mm as a backwoods gun on numerous occasions both on hunting trips in Alaska as well as regular camping trips. You also have to acknowledge that the P320 series has had some crazy teething pains. I certainly would not trust it with my life or anyone else's. Usually people that have problems with Glocks have played with them far too much and changed too many parts out for them to be reliable anymore. Ironic that you complain about Glocks being cheap pistols when SIG got their contract based on how cheap their pistol was.
@jordansvennes5587 Жыл бұрын
I've shot Glocks for 22 years and sigs for 15. Only had one glock break and that was a 22 in 40 s&w. After about 8,000 rounds. 15,000 rounds out of my sigs combined. Both companies are great in my opinion, but not perfect. Let's just be real here and admit both do good work.
@rickgrimes931 Жыл бұрын
@@jordansvennes5587 - Yeah, I used a Glock 22 going through POST and had issues with it as well. It never should have been loaned to me. But the big deal about the 320 variants that I don't like is that they are built to a price point. That makes me worry about reliability and longevity.
@jordansvennes5587 Жыл бұрын
@@rickgrimes931 It is a concern. I honestly feel like the 320s won't last as long as a glock in the bigger calibers but hey that's a wild guess. I have put 2000 rounds through a 320c in 45acp and it's ran flawless.
@bthorn50352 жыл бұрын
I'm an extended slide release snob. I hope somebody makes one for the Sig.
@AZTrigger2 жыл бұрын
FWIW, I used to add slide release extensions to my Glocks and I find the standard P320's are similar in size to my Glock extensions. In short, I have zero trouble doing one-hand releases on the XTEN.
@bthorn50352 жыл бұрын
@@AZTrigger Good to know!
@fuitaotua74002 жыл бұрын
Safariland GLS 578 GLS PRO FIT Holster did not fit my sig xten
@mma709Күн бұрын
Any issues with ND’s?
@joseluismckenna18442 жыл бұрын
Not trying to be negative just curious why no one is mentioning Springfield and s&w with their 10mm? Semi buyers remorse with my 4” s&w but looking at this (sig) being my house gun
@62dobie2 жыл бұрын
I love my SA XDM 10mm elite. I just purchased this today. I don't see it replacing my SA XDM 10mm elite as my edc. I do see it on my nightstand.
@freakpower912 жыл бұрын
The only thing that keeps me from buying one is the slide releases on 320 always seem to be stiffer than i can flick off with my thumb. Curious how the acuracy compares to a g40
@vic27962 жыл бұрын
They wear in with time . And they are not somthing you have to use ?
@AZTrigger2 жыл бұрын
FWIW: I can handle the slide release with one hand find on the XTEN. I start the video doing just that at the range.
@donovanchilton58172 жыл бұрын
if it's anything like the m18 it won't be great. Hopefully aftermarket gunsmith barrels will come out for it.
@sofloflow2 жыл бұрын
I run a KKM barrel + comp on my G40 & the damn thing may as well shoot lasers.
@k9m42 Жыл бұрын
Thinking a selling my Glock 40 and get the Sig.
@voltaire54272 жыл бұрын
It's a new design. Step off the hype train and sleep on it. Let Sig iron out the feeding issues. Don't get mauled. Same goes with the new Smith 10mm.
@shanepitzer4323 Жыл бұрын
I really want to trust the P320 X-Ten as I’m a big Sig guy. But….I can’t trust a gun that hasn’t been out a year and tested for reliability. If I’m face to face with a bear I can’t “hope” they worked all the kinks out. Plus there are reports of gun jams. I’m sure they will get worked out but for big game defense it simply has to work. 🤷♂️
@coles.15242 жыл бұрын
Wish I could find kne
@georgeaura Жыл бұрын
Any link to a holster for it?
@Rubin5342 Жыл бұрын
Will it fire by itself like 9mm 320? //ji
@62dobie2 жыл бұрын
What holster is everyone using?
@warriorwarrior6999 Жыл бұрын
Should have made it a little smaller. At the size of the Glock model 20 or build a mid size that holds 13 rds something similar to a Glock 19 or compact Sig. Of course it would be a little thicker but still this one seems too big. That’s why I won’t be buying one.
@TrinidadBadMon Жыл бұрын
10millimerrr
@datriggr82872 жыл бұрын
10mm = 1 centimeter. So a 10mm pistol is a "1 cent piece"... Haha, lol, no? jk
@Highgear1452 жыл бұрын
Got mine yesterday because it's my first 10mm I don't have any 10mm ammo 😁
@jaydee201210 ай бұрын
Thinner is the winner.
@tax9059729 ай бұрын
Dudeican tell you, not many can get shots like that at 25 yards. It's a nys requirement for cops and civilians qualification.
@jonathanhardy46262 жыл бұрын
What's wrong with the XDM 10mm ?
@sofloflow2 жыл бұрын
Nothing really, but some of us (me) have a hatred for rear grip safety's. I want the XDM 3.8" 10mm so bad, but that rear grip safety kills it for me.
@jonathanhardy46262 жыл бұрын
@@sofloflow sorry to hear that, I have had my XD's since the beginning and love them and never had a problem with them, very reliable 8k rounds and counting, I also like the grip better than most. I think you should give it a chance you just might like it.
@videogazer8012 жыл бұрын
The XDM has a defective trigger with a trigger safety deactivate that is plastic and will break. It broke on one reviewer already. Springfield will need to redesign with a new material for durability/reliability. I almost bought the XDM, but now, hell no
@kenkempa9907 Жыл бұрын
Throws fired brass 25 plus feet behind, at about the 4 o'clock position. Shooting outdoors I lose over 75٪ of the brass. Bummer.
@rollofire222 жыл бұрын
Take my money....
@sofloflow2 жыл бұрын
Its nice, not the best. G40 still reigns king.
@robkoons2100 Жыл бұрын
Sorry just don’t have faith in Sigs quality and in Sigs safety with their history. Great innovative country but will take the Springfield over the XTen all day long. Although I love the Sigs design and it’s trigger.
@dahveed2842 жыл бұрын
I wish it had a manual safety of some sort.
@sttvoyager17272 жыл бұрын
Love 10 mm rounds that have balls
@orlandopena99922 жыл бұрын
How'd you get one?
@orlandopena99922 жыл бұрын
@TEXT ME ⓵⓶⓵⓸⓷⓪⓻⓵⓼⓵⓺ just texted
@orlandopena99922 жыл бұрын
This is a scam
@Alexjimb02 жыл бұрын
Since you have one in front of you is the fcu the same as older p320s?
@AZTrigger2 жыл бұрын
Good question. I am checking with my contact at Sig now about this. Hopefully I will have a definitive answer shortly...
@donovanchilton58172 жыл бұрын
James at TFB said they're one way backwards compatible. X10 works in p320, not the other way around.