Sigma Slipper Clutch fitting Aprilia RSVR Gen1 model

Fitting a Sigma Slipper clutch to my track bike, Aprilia RSVR Gen1 year 2000 model (Feb 2015)

[@TommyLidal]

thanx for explaining the messurement.. :-D

[@aaronhughes4724]

Great video, nice and clear

[@AndrewBright748]

Hi Ian will let you know next week off to Aragon with no limits will get vids up too. It's quite important to set up clearances as I was .4 mill out and it was slipping too much, got someone with more experience to get stack height perfect. Keep watching for updates

[@ttrsv8626]

Hi, @Andrew Bright thanks for the upload. Can you confirm the following for the order of the Clutch Plates, Start with Friction, Steel, F,S , etc and End with Friction? This is different to the factory OEM Start with Steel and end with Steel.

[@lakkchina]

I need your help. You didn't explain if we need block the engine or engage 6th gear to do that. I should do that??

[@AndrewBright748]

To remove old clutch and install Sigma you will need to lock the engine to aid torquing the main Nut. Clutch locking tool will help.

[@lakkchina]

Andrew Bright ok I have clutch locking tool bought already. But as I can see this tool only lock the two cages that hold the clutch discs to avoid rotation only between the center support and the cage itself. How I lock the engine? It is a must engage a gear?

[@comfysofa1549]

Hi - I wonder if you could help me. I am helping a friend out with his RSVR that has a leaky gear change oil seal. I was hoping to be able to get the seal out but i know it wont go that way knowing me...im assuming the clutch has to come out to pull the gear selector through? Many thanks.

[@BlackTiger1252]

hello, can you tell me where you left off the clutch disc? the one in the back of the basket or under the pressure plate? I have the same clutch but I'm still not sure how to mount it. I would omit the under the pressure plate ...

[@distruggigomme75]

hi, can you advise where did you get the clutch tool?

[@coxylaad]

what do you think of the sigma slipper?

[@AndrewBright748]

Ian Cox Hi Ian, worked brilliantly at Aragon last weekend, no fishtailing going into corners hard on the brakes. This year I lapped 9 seconds faster!!, vid coming up shortly. Must put this down to the slipper plus new quickshifter and Brembo RCS19 brake pump and a good instructor!! Had a go on a BMW HP4 there!!! I WANT ONE!! So easy to ride fast.

[@TorrentPerformance]

Was this worth the money

[@AndrewBright748]

Yes, I got it second hand at a good price tho

[@coxylaad]

let me know if you get a BMW and want to sell your clutch :)

[@AndrewBright748]

Ian Cox Will do :)

[@tammyrider9451]

where is your number plate

[@AndrewBright748]

In a BOX :)

[@tammyrider9451]

Andrew Bright I thought it was right at the back of the undertray right out of the way that's all lol