Silver's Neomax Coilovers On My WRX (Install & Review)

In this video I am replacing my Rev9 Ebay Coilovers with a set of Silver's Neomax! This car has been through a bit of suspension. The stock suspension was too high, and too soft. I eventually switched to H&R Lowering Springs which were too stiff and blew my stock struts. In a rushed purchase to replace my blown struts I got Rev9 Coilovers. They were okay on flat roads but too bouncy over bumps and too soft in the corners. Now I'm installing Silver's Neomax Coilovers, let's see how they compare!
My Instagram: @streetlnspired
MOD LIST (Catagorized)
PERFORMANCE:
Cobb Accesport
Mishimoto Cold Air Intake
Deatschworks 300c Fuel Pump
Cobb Flex Fuel Kit
Perrin TGV Deletes
PRL EGR Delete
Grimmspeed EBCS
Grimmspeed FMIC
Boomba BPV
1320 Catted Downpipe
Single Exit 3" Catback
Radium Dual Baffled Catch Cans
Phatbotti Protune (E65)
372WHP/374lbft On Standard Map
403WHP/381lbft On Send-It Map
ENGINE BAY DRESS UP
Perrin Fender Shrouds
Perrin Radiator Shroud
Perrin Pully Cover
IBR Vacum Pump Cover
Painted All Yellow Caps
Custom Battery Cover
Cobb Radiator Cap
Superstick Dipstick
Grimmspeed Oil Cap
SUSPENSION/TRANSMISSION/Mounts
Brembo Brakes (Factory)
DSS Carbon Fiber Driveshaft
Silvers NeoMax Coilovers
Boomba Short Shifter Plate
Perrin Shifter Bushings
Perrin Shifter Stop
Perrin Front Strut Brace
Aluminati Solid Transmission Mount
Aluminati Solid Carrier Bushings
Torque Solutions Pitch Stop
DFJ Short Shifter
Weighted Shift knob
Titan 15mm Spacers
Cosmis FlowFormed XT206R 18x9.5+38
Muteki Lug Nuts
Dunlop Sportmax 245/40/R18
EXTERIOR & AERO
Custom Painted Tail Lights
Custom Painted Fender Badges
Custom Painted Rear Emblem
Window Tint 20%
Vortex Generator
STI Spoiler
Perrin Spoiler Stabilizers
Perrin Front Plate
S207 Rear Bumper Vents
S209 Fender Flares
OEM Style Front Lip
OEM '20 STI Fog Bezels
Bayson R Front Grill
OEM Style Rain Guards
OEM Style Turn Signal Mirrors
INTERIOR
Recaro Seats (Factory)
JDM Leather Shifter Trim
OLM Carbon Dash Trim
OLM Carbon Shifter Trim
Accesport Vent Mount
Suede Wrapped A-Pillars
Customized OEM Shiftknob
LIGHTING
Vland Headlights
Diode Dynamics Tail/Turn Module
Diode Dynamics Smart Tap Relay
Diode Dynamics Reverse LEDs
Diode Dynamics LED Tag Lights
Diode Dynamics Interior LED Kit
Red LED Strips (Under Dash/Seats)
Noble Rear Fog / 4th Brake Light
Alpena LED Underglow
Alpena LED Engine Bay Lighting
OTHER
Made Side Fender Vents Functional
Made Rear Bumper Vents Functional
Perrin Hella Horn Bracket
6 Hella Horns (2 visible, 4 hidden)
Urethane Exhaust Hangers (Raises Stock Muffler 2" to fill gap)
Perrin Window Vents
Painted Shift Knob To Match Seats
Painted Pinstripes On Carbon Dash Trim To Match Seats
Raptor Liner On Lip Kit
Custom Intercooler Shroud

[@oakapacu2369]

Literally the same problem I ran into when I was running my 209 Flares. Just couldn’t drive my car with the aggressive looking setup I was going for. Ended up just taking them off and going back to stock body lol. But great video!

[@ChazOfGod]

I’ve had mine on my 2020 for 3 months, I’m very happy with them. Definitely boosted the feel when cornering and the dampening adjustments are nice, you can dial it in like stock or even softer and obviously as stiff as you would want.

[@JohnSmith-gl2th]

Hey, do you still use them? do you reccomend them to buy?

[@jesseflores1282]

That u-turn was funny “ God these tires suck” lol just ordered mine I can’t wait to install them. Thank you for the video

[@themostrandom4602]

Good choice man! Had them on my old STI and the value is unbeatable. You'll love them!

[@ChevySSFTW]

That bouncing is exactly what my rev9 coilover’s do to I hate them so much. I can’t wait to order these! Good review man 👍

[@darrientempro7001]

Add some camber in the rear 2 degrees. I have adjustable rear control arms and endlinks. You can get that extra clearance your looking for

[@LapisBlueWRX]

I’ve had the same ebay coils for about 4 months and have had zero issues. Your roads must be CRAZY! car is lookin good 👍🏼👍🏼

[@StreetInspired1]

Yeah definitely bumpy around here!! But glad to here you had good luck with them!

[@LapisBlueWRX]

@@StreetInspired1 I’ll run them until spring then upgrade to a higher quality set so I can feel the difference 👍🏼

[@pasigiri]

THIS IS HILARIOUS!!!! I literally am supposed to have a set delivered today (hopefully).

[@lesterudani8369]

Got mine too and installed on my Mitsubishi Lancer Cedia Silver's coilovers Black and Silver

[@troyspurvey5158]

Just a heads up, unless you have the swift springs, they actually do settle and site reccomends re adjusting 3-5mm of preload.

[@matd8958]

Rubbing is racing. Quote from the legend dale Earnhardt sr.. good review 👍 im looking at these as option. Im leaning towards fortune 500s.

[@Fwrae_]

Thank you for all your insight !!

[@waybach]

Any issues on lowering your VB? I’m getting the clunks right after my Subaru mechanic installed my FA500’s and they clunk so badly but mainly at slow speeds and turning at slow speeds. Anything over 40mph I don’t hear any clunking or potholes don’t clunk. Any advice? We used the adjustable endlinks they sent me, but maybe I should just tighten the Hell out of them?

[@silverdetox]

rubbing is inevitable bud, comes w da #staticlife 👍🏻

[@StreetInspired1]

I don't rub anymore and I'm much lower now. Just took off the stupid flares and spacers haha

[@harrycrisp8897]

How is your car so quiet in the cabin? I love my STI, but man I’m getting old because it’s loud and starting to bother me in the interior.

[@gamingbluemoon]

How are they holding up? Looking for my 07 Highlander to see how they feel.

[@StreetInspired1]

Almost a year later and they still feel great. I've even adjusted my height a few times and they were still easy to break lose and adjust. Definitely a very solid choice!

[@Diamondblend]

Would you have gotten Swift springs if you could from the beginning?

[@StreetInspired1]

@@Diamondblend I think I would've done the swift springs if I could go back and redo it. But still really liking them even on the standard springs

[@Diamondblend]

You got the additional rear extenders, right? To make the adjustment alot easier? Wondering if I need that vs. not having them

[@StreetInspired1]

@@Diamondblend I didn't get them and don't find myself really needing them. I hardly ever readjust them but if you think you'll be re adjusting them all the time it might be a good thing to have

[@RIVIMAX]

so the exhaust is titanium huh

[@Phuong_Nguyen_]

How stiff are they at full stiff?

[@StreetInspired1]

They're still smooth riding at full stiffness. They just keep the car more flat in the corners on full stiff.

[@Mikerogers77]

What year is your car?

[@StreetInspired1]

2020

[@princemoney1]

What spring rate do you have

[@StreetInspired1]

I have the standard spring rate which is 8K all around, but you can order them any spring rate you want.

[@OFFICIALRAPTORTHERAPPER]

Doesn't look lower than stock. If your near Oaklawn area we can compare I got the same color 21

[@StreetInspired1]

Definitely lower than stock. I had the stock 18" wheels and had like 3" of space between the fender and top of the tire. This is lower I just don't want to go any lower or ill rub like crazy

[@OFFICIALRAPTORTHERAPPER]

@@StreetInspired1 yeah you got 9.5 wheels too dont you.

[@englear-ak8333]

Can I buy your rev 9s for cheap 🥺

[@StreetInspired1]

Where are you located?

[@englear-ak8333]

@@StreetInspired1 Boise Idaho long ways away

[@StreetInspired1]

@@englear-ak8333 Damn, if shipping wasn't so expensive I would. Shipped my top mount intercooler a while back and the shipping cost 1/3 of what the intercooler was worth. Idk how these companies can afford free shipping on stuff.

[@englear-ak8333]

@@StreetInspired1 ik it’s sucks I actually work for fedex and the company’s pay weekly for shipping and the more they ship the cheaper it is for them.

[@kelbaez]

@@englear-ak8333 if you work for FedEx, maybe you can get a discounted label for the coilovers