Easiest Way To Install Trailer Hangers on a Tandem Axle Trailer

I have installed a few hundred of these hangers in my career and there is no easier way than this. It sure is the fastest way, the easiest way and the cleanest way to setup and install all 6 hangers on these trailers.
Being able to set up all 6 hangers at once and then set the alignment is truly a game changer and this is my go-to way for making sure I get all the hangers assembled and installed in the shortest time possible.
Hope this helps.
Check out our store: simcoespring.com/
Follow me on Instagram: / simcoe_spring
Follow me on TicTok: www.tiktok.com/@simcoespring?...

[@crisco1818]

Not a big fan of plate on frame. Nice area for salt and rust to form

[@billyhorton5779]

Your giving away to many trade secrets for free bro. I am impressed! The quality is "factory" level" workmanship!

[@ern48]

Nicely done. I've done this same thing several times building large boat trailers but using angle iron and then bolted it to the 8" channel frame so the owner(s) could adjust the axle placement later if necessary. The largest trailer was for a 34' wooden gillnet boat with an inboard engine.

[@hfdzl]

Having fabricated for many years, I understand the ease of setup doing it this way. My self I would flip the trailer over for ease of welding and not having to do out of position welds. Thanks for all your interesting content!

[@bossman6174]

But now with the plate the moisture and dirt can get in between and there it will rust out first. It will be a long time though . Maybe a beat of some caulking or oil treatment will delay that process.

[@rockeerockey6941]

The sign says, "wear your respirator!"

[@gervaisfillion9417]

we would like to see when you installed all the hardware too!!!

[@eccentricsmithy2746]

No test fit after tacking to make sure all parts fit before welding them solid? 🤦‍♂

[@leeknight9063]

HI, I'm getting ready to add several feet to my tandem axle trailer, I want to add a third axle. How do I know where to locate them? Thanks in advance

[@jameslindsey2118]

This fellar is sharp im grateful for your video im learning 😅

[@luisadriandelgado5343]

This guy does such a great job explaining everything smoothly, clearly and to detail.... Awesome job...

[@DirtRoadLanding]

Excellent video. I really enjoy watching and learning from you. Keep em coming!!!

[@Roars270]

Appreciate all the information man! best page for this content matter that I've found!

[@theokanaganslayer9604]

I’m building a trailer, and this is brilliant! you my friend are a great welder and a good coach, good video!!

[@ronald1977rt]

Great video, helped me out alot, Thanks.

[@robertmartin5662]

Excellent work ethic. Enjoy watching your videos.

[@dillonmagers2886]

Thanks for the tips. I’ve got a trailer to re-axle shortly. I was fixing to flip the trailer over to make it easier. I may rethink that plan based on your process. Keep putting out the videos.

[@lazarohernandezsuarez2595]

Excelente trabajo mucho mejor que los fabricantes un saludo CDMX Mexico

[@verypamwekavejandja9127]

Great work my man, 👌🏽

[@Winnipeg_Jets_Fan]

I been wanting to take the one 3500 lb axle off my utility trailer and put 2 new ones on and lengthen the trailer a few feet and been terrified of doing the hangers. This is an amazing simple solution. THANKS!!!