I have a 2011 I'm getting ready to do this to . Love how the 98s have the door and tire on the back better , it makes it look more off-road . Great job . Cool dog too.
@2stroketurbo2 ай бұрын
😁
@tonybucca56674 жыл бұрын
If you had put the nut on before you cut the bolt to length, you could have backed out the nut to clear the thread, without needing the die.
@Bushido_Prime30012 жыл бұрын
This is perfect. I want to lift my crv and I wasn’t sure if I needed control arm spacers as well or longer cv axels
@brucecarney44165 жыл бұрын
Should I find myself on the 3 hour drive south from Bremerton, I will try and stop by the shop and express my appreciation for these vids. Informative yet with just a bit of personal flair.
@williambell90685 жыл бұрын
You have a fine shop dog there, she makes me smile! I had a GSP like that and if she was missing check to see if she found a way into a car or truck to nap. All it took was a door open and you turn your back. She loved to ride too!
@brucecarney44165 жыл бұрын
Many years ago, I had a CAT with the same love for travel by car.
@TheDigitalNomadX5 жыл бұрын
any updates now that its been installed for a month or so? vibrations , alignment issues ?
@brempazlima73862 жыл бұрын
I installed on my crv and I need make alignment
@julioortega326310 ай бұрын
Im planning on installing 2 in on the rear will it need alignment?
@TheDigitalNomadX10 ай бұрын
@julioortega3263 I believe with the 2" you will need adjustable control arm. 1.5" you don't need it.
@davemcguigan2185 жыл бұрын
Your car trims out nicely. Looks great!
@mauriciodominguez1983 жыл бұрын
Hey boss I have a question did you only add the specers nothing out
@MrGazzw5 жыл бұрын
Looks good, a simple easy and cheap way to lift it, we got the same CRV here in England too, so very interesting, definitely food for thought.
@arnoldgarcia98274 жыл бұрын
Finally I see a POV I’m doing this same setup
@craigiefconcert64933 жыл бұрын
Did you have to change camber or alignment?
@AlexandarHullRichter5 жыл бұрын
How were the wheel cambers when you checked the alignment?
@Mrviewplay11 ай бұрын
Hola amigo adelanta tuviste que hacer algo adicional yo estuve intentando poner los míos pero fue imposible poner la bandeja inferior con el amortiguador
@sergioquintero83972 жыл бұрын
Did you need anything else besides the spacers?
@ericc.76403 жыл бұрын
So it doesn’t need a camber kit adjustable or control arm adjustable ?
@luisgagot39338 ай бұрын
Saludos, Levanté la Mía a 2.5 pulgadas y me dió un trabajo Tremendo para montar, porque hace mucha presión y al Arrancar vibra, pero me encanta, necesito brazos más largos, porque me quedo Trinca la suspensión 😅
@kimkiriniki94335 жыл бұрын
I am quite happy with the stock suspension on my 98 CR-V, plenty high enough. Wouldn't the lift kit put extra stress on driveshaft/steering joints and other components like the rear trailing arm bushes?
@2stroketurbo5 жыл бұрын
We will find out but I don't think so
@ivanrivera99334 жыл бұрын
Yes is too high. For the front.mine vibrates from 10mph to 30mph got 1 1/2 spacers.
@mikeholbrook50845 жыл бұрын
I bought a slightly larger tire over the stock size (5 tires). This gave me a better selection of tires.
@AlexandarHullRichter5 жыл бұрын
What size are you running? When I was looking, any attempt to get taller tires drastically limited my selection.
@LarryRichelli4 жыл бұрын
I am sorta surprised that with the car being that age you didn't add new struts?
@kalanikaau15 жыл бұрын
How in the world is installing a lift kit going to affect the gear ratio?
@televisionandcheese5 жыл бұрын
Maybe he was get confused with wheel size changing ?
@brucecarney44165 жыл бұрын
By allowing a larger diameter tire?
@armandoacosta905 жыл бұрын
Quick question. I'm sure you have put some miles on it already. Did you get any kind of vibration now that you put the front spacer in? I have 2in spacers I'm about to cut down to a 1 1/2in. I already have the 2.5in rears installed. Thanks in advance! I tried doing the two in and it was impossible to get everything to go back in. So I am having the spacer cut down a bit
@2stroketurbo5 жыл бұрын
nope. works great.
@armandoacosta905 жыл бұрын
@@2stroketurbo awesome! Thanks alot!
@ivanrivera99334 жыл бұрын
@@armandoacosta90 I put a 1 1/2 spacers on the front and it vibrates.Im going to lower it to 1" spacers on the front 2 1/2 on rear.
@rogeliosolismayorga852510 ай бұрын
Me gustaría saber las medidas exactas de las piezas para poder fabricarlas
@RichieRouge2065 жыл бұрын
Looks really good! Good job
@chriss25005 жыл бұрын
I have a weird rumble and rubbing sound coming from the rear end whenever I make tight turns. any ideas of what that might be? My first thought was that maybe the rear differential fluid needs to be changed out, but just wanted to see if I could possibly get a second opinion.
@DiogenesNephew3 жыл бұрын
In case anyone else wants to know, that's almost certainly rear differential needing new fluid.
@chocolatetamour4694 жыл бұрын
Hello, I'm dron Panamá, hace a 99 CR-V but un muy country nota sale this spacer attachments for shock system
@2stroketurbo4 жыл бұрын
HRG in Utah sells them
@saulibarra77069 ай бұрын
Why I get vibrations after lifting, I change everything, I swear everything, and my rd1 still vibrating
@Yankeeni-d3j2 ай бұрын
Just get off road shocks
@alvinnacubuan93902 жыл бұрын
Where can i buy the spacer
@beverlynmetid8442 жыл бұрын
from where can i order pls?
@atletangofw19894 жыл бұрын
Did you remove the rear sway bar?
@compaq96332 жыл бұрын
In malaysia we cannot find that kind of spacers...and nobody knows where to buy it.
@2stroketurbo2 жыл бұрын
USA has at least 5 vendors
@victormorales82914 жыл бұрын
Where can I find the 1 1/2 lift?
@That2Aguy4 жыл бұрын
eBay
@saadyhtfernandosanchez65862 жыл бұрын
Quiero cómpralos vivo Colombia!
@ОльгаТрушкова-б1т3 жыл бұрын
Сколь стоит?
@dj330365 жыл бұрын
Too bad I don't live closer, I'd love to do this to my CRV. I don't have the tools to do it myself. Finding a good mechanic here is Mexico is not an easy thing to do.