Very nice. I also had the same body but different color. For the black trims and bed, I masked and painted from the inside. To achieve the flat finish, I cut on the protective film around the black areas and painted with Tamiya flat clear.
@ralphhowing34733 ай бұрын
Why go through of all the trouble of masking under the body when, as you say, just trim the over spray film like you did and use the f-black on the outside not clear mat. the over spry film makes an awesome detail mask!!!
@ralphhowing34733 ай бұрын
I've done that too, but why not use flat black on the out side you've got your black and flat all in one shot, killing two birds with one stone
@joseCalderon1976 Жыл бұрын
Wow. I learned something new today. Thanks! I'm about to try to paint a body with my 7yr old son. This will be very helpful. Thanks! Subscribed
@BBStudioPH Жыл бұрын
Glad it was helpful!
@d.r.4453 Жыл бұрын
That's such a cool paint scheme! Love the color choice. Well done dude!
@BBStudioPH Жыл бұрын
Glad you like it!
@ronhakenjos1437 Жыл бұрын
Very nicely done ✔️
@BBStudioPH Жыл бұрын
Thanks ✌️
@guiller32110 ай бұрын
Wow, wish I had your patience and dedication brother.
@jordancobo8307 Жыл бұрын
Bih look clean af
@CRAZYBUILD349 Жыл бұрын
outstanding work, very well done, i learned something today !!!!
@Markooboy2 жыл бұрын
Amazing work!!
@BBStudioPH2 жыл бұрын
Thank you brother!
@muzicgr811 ай бұрын
Awesome Job man, stay Built Ford Tough
@elektron2kim666 Жыл бұрын
Awesome. I'm about to paint one extra body, so I got some good ideas out of it. I painted laptops, watches and whatnot as well.
@matthew.sugiarto Жыл бұрын
so TS can be used on RX lexan body? Does it adhere well? I see some minor scratches in the video
@BBStudioPH Жыл бұрын
Yes it does adhere. Unfortunately, the matte black paints can be chipped off easily specially when hitting or sliding on rocks.
@19coyote5oh9 Жыл бұрын
Beautiful job!!! Thanks for sharing.
@BBStudioPH Жыл бұрын
Thank you! Cheers!
@brich2929 Жыл бұрын
Do you have to be sure to clean any soap residue from outside the masked area before painting?
@BBStudioPH Жыл бұрын
Yes. Just to be sure that the surface is clean before painting.
@Chaos4Eva1 Жыл бұрын
Great video! I'm gonna "try" to recreate what you did. I'll probably end up with a smashed black and orange pumpkin thing.. lol
@luckyenam63292 ай бұрын
Very dope content any chance we get a driver and interior In future?
@avelasqu22 Жыл бұрын
Nicely done! I just got the same body and am looking to replicate your process. Thank you so much for sharing. One question though, when you get to the black, do you think it would have been easier to just x-zacto knife the overspray film on the parts you wanted to paint black and then just spray the whole thing black? This is the only thing I am considering on changing from your video and just wanted to reach out to see what your thoughts were.
@BBStudioPH Жыл бұрын
What you said would have been easier, but you must also make sure that you don't damage the body shell and the film is firmly applied to the body during painting. I prefer to do the masking myself because it is easier to see if there are adjustments needed and fix.
@xperncegaming37025 ай бұрын
Sick man!
@playerpianogal6 ай бұрын
Very well done!!! Could you please put a link as to where to buy the masks for the car windows?? I just painted a body in black, and it looks beautiful.....but the windows are black as well. :-(( I cannot seem to find stick-on masks ANYWHERE on line. and I plan on doing another car soon. Thank you!!!!
@user-rx8qq8sk9ydv1ce5ib Жыл бұрын
Thanks for sharing. Any reason you didn't paint from inside everything to be glossy!
@BBStudioPH Жыл бұрын
I don't like the wheel fender to be glossy lol
@user-rx8qq8sk9ydv1ce5ib Жыл бұрын
@@BBStudioPH 👌
@roshanwimalasinghe9782 Жыл бұрын
Nice paint work. I have the same color Tamiya amarok CC01. Congrats from Sri Lanka.
@adickurig4 ай бұрын
For the flat paint part: obviously you cant pain this from inside or it won't be flat. But, couldn't you use a hobby knife to slice the cellophane cover and remove only isolated pieces and make the exterior masking part easier?
@BBStudioPH4 ай бұрын
Yes you can absolutely do that. It's much more easier than the way I did it.
@DerRC-Papst10 ай бұрын
Looks Great 👍
@danieldong50028 ай бұрын
Wow, learned reusing window mask, thanks!
@BBStudioPH5 ай бұрын
You're welcome!
@chozen_1309 Жыл бұрын
Very nice 🤜🤛
@mariomozie21028 ай бұрын
Nice Job👏👏👏👏👍👍👍
@BBStudioPH5 ай бұрын
Thank you! Cheers!
@YYZRL2036 ай бұрын
Good video. Well made and informative.
@BBStudioPH5 ай бұрын
Glad you liked it!
@FoxRacingGaming9 ай бұрын
is primer necessary? just wondering if i need to spend another 11 on primer
@Losi5t2018 күн бұрын
Why did you paint the outside I mean I'm guessing it will stick but I will also chip off easier
@yaeirleija958122 күн бұрын
How long did it take you to finish
@budman897998 ай бұрын
What kind of shampoo? What's the ratio of shampoo to water? Awesome work!
@BBStudioPH5 ай бұрын
3:1 Water:Shampoo Ratio
@bluemoon34072 жыл бұрын
hai bro, the outer body paint,does it last long? bcoz im about to paint mine.😅
@BBStudioPH2 жыл бұрын
It depends on your use brother. Make sure that each layer is completely dry before painting another layer. Just take good care of your body and it will last long.
@bluemoon34072 жыл бұрын
@@BBStudioPH i paint all the fenders with 2 layer each..i hope it last long😅😅😅
@BBStudioPH2 жыл бұрын
@@bluemoon3407 put some top coat layer for additional protection 😊
@rcjoy5362 Жыл бұрын
Very nice, very clean 👍🏻🫶🏼 well done !
@the.just.able.biker67 Жыл бұрын
Just a couple of questions because I'm new to rc's. 1: Is there a specific kind if soap younise before masking the windows? 2: do you have to use a damp cloth to rinse away the excess soap on the body before drying it, or do you just give it a wipe with a dry cloth?
@BBStudioPH Жыл бұрын
To answer your questions: 1. Any will do but I suggest to use a dishwashing soap. 2. Yes. You can use damp cloth, it's much faster to clean that way.
@the.just.able.biker67 Жыл бұрын
@@BBStudioPH Thank you very much for the quick reply. I'm looking forward to giving it a go on my ftx rock van.
@riothero313 Жыл бұрын
@@BBStudioPH Yeah, dish washing soap cuts through any oils from your finger prints since it is made to clean grease.
@vmddew Жыл бұрын
Nice car! thank you.
@Rc-Adventurers Жыл бұрын
Looks sick. What front bumper is that??
@BBStudioPH Жыл бұрын
Some China metal bumpers.
@tizdaz5698 Жыл бұрын
Tamiya TS paint on Lexan? this a no no, should be PS?
@BBStudioPH Жыл бұрын
Should be PS but I didn't have any problem using TS on a Lexan
@tizdaz5698 Жыл бұрын
@@BBStudioPH yeh it goes on fine & looks no different to the TS, only difference is PS doesn't flake & has flex, so if/when the lexan shell takes impact and bends, the paint wont flake off ;)
@BBStudioPH Жыл бұрын
@@tizdaz5698 Thank youfor this bro! I will use PS next time :)
@andyb99947 ай бұрын
Looks awesome well done, seems to be some critics in the comments....thanks for the tips!!!! Good job 💯
@Douger318 Жыл бұрын
IM ABOUT TO PAINT A RC RACE TRUGGY TAIYA BRILLIANT BLUE AND BRIGHT SILVER WHICH COLOR FIRST THE BLUE
@JoMorkenStrørseth Жыл бұрын
Wpould it be possible to use Plasti-Dip paint, so you cab just pull it off and change colour when bored of it?
@SnarkyRC Жыл бұрын
Yes
@Barbariandisks Жыл бұрын
Needs a texas longhorn decal on the back window
@BBStudioPH Жыл бұрын
That's a great idea! ❤️
@akmalnoor3206 ай бұрын
just sharing, some thinners damage the plastic body shells….from experience😩. Since then i’ve used isopropyl alcohol. No more damage.
@craigknauss925011 ай бұрын
What do you use to smooth out the edges
@BBStudioPH11 ай бұрын
Sand paper 200 grit. Wrap it on a bottle or small can if you want to smoothen the fenders arc.
@JumelCastanares Жыл бұрын
I noticed you peeled the protective paint off and then remasked to paint the fenders, bed and hood vent. Im curious why did you that way?
@BBStudioPH Жыл бұрын
I want to achieve the flat black finish for fenders, bed and hood vent that's why I painted it on top of the body.
@JumelCastanares Жыл бұрын
I know that. You could've just left the protective film and use a hobby knife to trace score the fenders and peel that section off. It was just extra work you did I was curious about
@BBStudioPH Жыл бұрын
@@JumelCastanares sorry about that. I am just more confident in doing that technique plus it helps me visualize the outcome that I want. I am also afraid to scratch the body. 😊
@goforitpainting4 ай бұрын
Cool 🛻
@BBStudioPH4 ай бұрын
Thank you!!!
@dualtrondreamteam6811 Жыл бұрын
Why didnt you shoot the black from the inside
@BBStudioPH Жыл бұрын
That would result to a gloss finish.
@dualtrondreamteam6811 Жыл бұрын
@@BBStudioPH could you not sand the outter surface with wet and dry to remove the shine that way the paint cant be scrapped off the outside of the body
@slottygw2wvw842 Жыл бұрын
Im shocked the TS paint didn't eat the polycarbonate plastic..........
@anub1s15 Жыл бұрын
my main concerns would be either that or it just chipping/flaking off when the body flexes. any update on how that held up over time because that's very interesting (recently built a 97 celica monte carlo body and it's stickers were just a nightmare, planning to build another but not sure if I should paint the livery in to the body as the PS paint doesn't seem to leave the cleanest outlines or perhaps apply something like this to the outside which would definitely be easier but aforementioned concerns)
@SnarkyRC Жыл бұрын
Nah it won't eat it. It's just not flexible like the PS paint.
@vi5ionary3 ай бұрын
Sure feels nice to pull off the outer foil, but why don’t you use it for masking and painting the outside? Feels even better to pull it off AFTER that… 🤷🏻♂️
@jca65lb Жыл бұрын
Do you really need to paint the underside also? Wait, it's only the underside that gets paint?
@BBStudioPH Жыл бұрын
Only the underside is painted to achieve the glossy finish.
@weedfaya959 Жыл бұрын
Magnifique , mais pourquoi peindre par l extérieur, la parie noire , à la longue la peinture s en va ,
@SpaceCoastStreetRippers13 күн бұрын
The real secret is that wasn't shampoo. Its the protien that really helps it stick.
@slottygw2wvw842 Жыл бұрын
BRUH!? wow
@Thatguy-zh1lnАй бұрын
All that work to bash it and beat it. I buy pre painted bodies and apply flex seal to the interior to make it more durable
@Harvz787 ай бұрын
Should have outlined the windows too.
@markiootje Жыл бұрын
sweeeeeeeeeeeeeett
@ralphhowing34732 ай бұрын
To start with do not remove the body mask, you could have just trimmed where you wanted your black, a sharp knife will do great! remove body over spray film at the last step only!!!!!! Now you have tape residue all over the body!!!
@ungurdani83469 ай бұрын
Salut my friend super car . super video subscribe subscribe
@SnarkyRC Жыл бұрын
Decent. Now it needs an interior.
@066motocross Жыл бұрын
What exactly is the shampoo method? Instead of explaining that we get tortured with weird music
@markiootje Жыл бұрын
use nail remover
@TheNathan5150319 күн бұрын
🤦♂️rc paint goes on the inside. That black is gonna scrape off a little bit every crash
@terrencezona5257 Жыл бұрын
Now, learn how to do it right and make another video
@BBStudioPH Жыл бұрын
I will soon!
@marcusbrandl8826 Жыл бұрын
Nice Video of How to NOT paint your RC Body...
@TirolChris7111 ай бұрын
Why?
@G.M..11 ай бұрын
@@TirolChris71He does not wash the interior of the body to eliminate molding residue, the first layer of paint is too thick, 3 or 4 thin coats of paint is better, 2 or 3 final coats of white paint enhance the color and protect it. I'm not sure the paint he made resists for a long time...
@TirolChris7111 ай бұрын
@@G.M.. ok, thank you🙂
@sneakyneaky11 ай бұрын
Can you post the link of you doing it better?
@marcusbrandl882611 ай бұрын
@@sneakyneaky es gibt keinen Grund für einen link...wenn du nicht erkennst was man hätte anders machen sollen, dann solltest du dich generell mal mit dem Lackieren beschäftigen. Angefangen bei der unzureichenden Reinigung der Karosserie, den zu dicken Lackschichten, dem trocknen der Maskierungen, des fehlenden hinterlegen mit weiß, dem Lackieren von aussen,...
@066motocross Жыл бұрын
Video is good if you can get through the stupid music
@shannaconda343410 ай бұрын
Nice job, man. I think you could have saved yourself some hassle while spraying the flat black on the outside shell by using the overspray film as your mask and cutting out the parts to be painted.
@right-behind-you9 ай бұрын
It's more prone to damage on the outside. One bump and you'd see the color underneath.
@blumexcolombia79217 ай бұрын
For sure you don't paint an rc car on the outside! Here a good example of how NOT to paint your rc body