SimVibe by SimXperience In Depth Setup and Configuration

[@FLATSHIFT_RACING]

I just cannot drive any sim without Simvibe it’s just the best there is!!!!

[@ProSimRacing]

Pretty in-depth tutorial Darin, this should be a great help to those that are new to SimVibe, Keep up the great work buddy.

[@OhItsThat]

Pro Sim Racing Ha! Im still confused about the sound cards. I have 3 Buttkickers. 1 under the seat, 1 on the shifter and 1 under the pedals. I have all 3 daisy chained to each other and plugged into my mobos on board audio. I use the Oculus to sim race so that audios running via HDMI. What do I need? 1 sound card for each transducer? I imagine I’d run it in extensions mode.

[@menacegtr]

Brilliant, a very well explained tutorial to get you up and running

[@giuseppeconsiglio5167]

Ottima spiegazione grazie

[@OhItsThat]

What’s the reason for doing both chassis and extensions modes at the same? This software is mad confusing.

[@miguelgonzalez9631]

Each handle different transducers. Chassis has 4 outputs (one for each wheel) and extensions does the other parts of the car such as Seat, Pedals and Shifter

[@MannyDer]

just realized I had the right channel plugged into the output of my amp :)

[@frankzappa2274]

Thanks Darin! Helpful reference tool

[@jorge_781]

Is there a demo? 83 US$ is a quite chunk of money to thrown in without testing.

[@coinsagE46m3]

I can't find the definitive answer anywhere on the internet so I'm hoping you guys at SinXperience are still monitoring this video: is SimVibe or any tranducer-running program you make compatible with Forza Horizon 4? I'm itching to upgrade my sim rig with 4 buttkickers in a chassis mode config just for this game. Lemme know!

[@joshvillers4297]

SimVibe is compatible with Forza Horizon 4.

[@trulsvian]

FH4 has the ability to bitstream Atmos content to a suitable AVR / PrePro, if one is bitstreamning Atmos content wil Simvibe work as intended?

[@carlestrullas4668]

Buenas, tengo un problema, simvibe no me funciona con Raceroom experience desde que sector studios ha realizado una actualización... Cómo puedo arreglarlo? Muchas gracias!

[@Scoobydcs]

Can i use optical cable instead of phono leads?

[@joshvillers4297]

We have not tried to use an optical cable for SimVibe, but as far as I know, it should work.

[@Swindog00]

Theres an iRacing setup somewhere. It talks about using a home hifi amp which I assume you are using. It takes the low power full audio and filters it if you have a cross over built in OR you can buy a cross over and can set the ohms of the speakers. Optical should work if you set your amp to

[@magzire]

I have two shakers under my seat (each on there own sub left/right channel ). I only have the seat enabled in extension mode. Does that mean only one shaker is running?

[@magzire]

Ahh i was only using one shaker, engaged shifter for the 2nd shaker

[@BigMeanyVids]

@@magzire Yes, basically sounds like you have a two channel amp so would need to do what you did and use another of the extension modes for your second channel. Alternatively you could split the single channel into two and plug that into the amp l/r inputs (analog approach) but just using a second channel like you did is easiest.

[@albertocastenetto1273]

Can I use SimVibe with a ps4?

[@FuturisticViper]

No pc only

[@matarikimuppets7854]

i cant get simvibe to recognise any of my games even after pointing it to the steam location

[@SimXperience]

If you haven't yet, please contact us at [e-mail] for help on the matter.