Sirius Archery Arrow Spinner | Impressions and review!

[@dougdiplacido2406]

Two products that are a world apart in quality and design. Thanks.

[@kevindown1592]

Ok. I just ordered one and gave AJA props for sending me the Sirius site. A bit of background on me. I used to manage a new product test lab. The aluminum rail on this arrow spinner is what used to build automated cycle testers for things like hinges, cables, and latches. Our test results were combed over by engineers and the would put us through the wringer if we produced a failure they didn’t like. I think this arrow tester would pass their scrutiny. Thank you AJA for binging this tester to my attention.

[@luckytrapper7656]

I hope Sirius gives you a big thank you. Their sales is going to go up because of your review. Great video. I'm definitely buying one.

[@darlabeckner3183]

2-18 inch wooden dowels makes the pineridge spinner very good spinner

[@peterplanz2310]

I just ordered mine and gave AJA the shoutout for sending me to Sirius.

[@patrickpaeschke1619]

Out of stock 😢so I found Ruff B2 square and spinner cost bit more but needed something better than Amazon returners will see if its any good

[@craighertzog7260]

Gotta love extrusion and the many uses for it. So glad more archery companies are adopting it. Last Chance arrow saw is made with it, the Coops Bowsmith spine tester as well along with a lot of other things.

[@mitchellgenz1373]

Great review, another tool for the archery bench at home.

[@johnbarron4265]

You know what would be really cool? An arrow inspector that also doubles as a spine tester! After all, a spine tester is basically an arrow spinner with a 26" or 28" span, dial indicator at the center, and enough clearance for a hanging weight. Turns out you can build one of your own very easily and inexpensively. I found a pair of 3D printed arrow spinners with quality bearings on ebay for $20. You can buy T-track in just about any length you want, and then mount those spinners at 26" or 28"! Dial indicators are also easy to come by. Sure beats spending $150+ for an arrow spine tester.

[@dinnerwithfranklin]

Just what I needed to know. Thank you

[@mysticmac4139]

got a arrow straighter for LAS years ago

[@RugerNuger]

Just ordered one on its way to ireland can't wait!!!!

[@NPC-fl3gq]

I loves me some spin testing. Gotta upgrade for sure.

[@cancro2010]

Love mine!

[@lawrencelewis1036]

Thanks for the review,I'll be ordering one.

[@jeff_8789]

I love sirius but I got my spinner off ebay for 14 bucks its 20" long solid aluminum with ball bearings i like how urs collapses only thing I dislike about mine is the 1 piece design will probably get one of there's for a spare thanks for the review

[@zacherygearhart3388]

Can you do a review of the arrow squaring attachment ?

[@cozycare1655]

I just got my arrow tester from amazon lol. I think I'm gonna return it haha! Time to get Sirius!

[@brandonmcdonald6121]

Making me spend more $$!!!!

[@brycehiigel235]

Same Here.

[@BriarJumper]

Show what the difference would be with an arrow that doesn't spin well. If you get a dozen beaman white out only half spin test acceptable on my pine ridge. Would the Sirius show more failing a spin test. Would the Sirius cause you to reject more arrows than the pine ridge? I noticed considerable wobble at the end of bemans. I switched to black eagle and no wobble on all 12

[@brycehiigel235]

You talked me into it. Just ordered one. What is sad I had bought the other one a couple of months ago then saw this one a few weeks later. Been contemplating for a while. Then saw your video. Thanks for helping me spend my money. Hahaha

[@averagejackarchery]

LOL! Definitely high quality money well spent here.

[@brycehiigel235]

@@averagejackarchery well my Ferrari came in today. Now for the inserts and start having fun with my new 1/2 dozen arrows

[@houseatreides6683]

​@@averagejackarcheryis this the best spinner for $50?

[@edbohi2389]

I'm sold

[@longshotdiedtired1582]

I bought a arrow spinner off Amazon that came from china it’s all aluminum and built like a tank , also had a attachment for squaring cost 30$

[@bigwestreviews4933]

I think you missed my favorite part. For $16 you can get an additional end plate to square shafts.

[@jasonbellows7]

Quality content !👍

[@jims.1917]

Could this jig b adjusted for 18" arrows?

[@averagejackarchery]

No.

[@MayoMan450]

Is it adjustable? Can I use shorter arrows

[@averagejackarchery]

No, not adjustable. But your arrows would have to be pretty dang short!

[@titansfan2104]

Can you use this to find the spine or is it too short

[@averagejackarchery]

Too short. Spine should be measure 28".

[@steelandsanderoutdoors2617]

Dang I just ordered stuff from them, I would have added this to cart if I knew they had it haha next time

[@marshalllo8573]

Will this work with Vap micro diameter arrows

[@averagejackarchery]

Yes. It accommodates all arrow diameters.

[@Nakai2024]

I just purchased one to try it out, but the unit I recieved appeared used and dirty. The 3d printed plastic sections were a loose fit on the aluminum frame and the roller bearings were also loose and easily moved up and down. Also the bearings lose their momentum fast and have to be spun frequently to assess the arrow straightness. The aluminum film on the bottom of the unit was brown and almost seemed like someone dropped it in the dirt and stuck it back on...and processed a return... I am reaching out to the company to evaluate my options. I will let people know what happens..

[@jamesmarsee3297]

What happened?

[@ironcladaussie3938]

A solid length of Jarrah timber and some skateboard wheel bearings is a cheaper alternative. 👍

[@lawrencebermann2215]

I don’t see the link

[@Devil_Grunt]

How much wobble is considered acceptable in an arrow?

[@averagejackarchery]

All depends on what grade of shaft you buy! I like buying nothing greater in tolerance than .003.

[@rockylopez1371]

None at all

[@timothyhall963]

Very nice

[@pensnut08]

Considering the price of the PR tester vs this one... No brainer.

[@mysticmac4139]

Have you ever shot at a PSAA event ?

[@averagejackarchery]

Nope! Been on my list for years but life always has different idea.

[@peterxyz3541]

This tool can be made: nice 20x40 extruded aluminium & 10.00 worth of 608 bearings

[@mittyvidz8259]

Everything you've said is good except Sirius didn't invent this style of spinner. I had an almost identical extruded alloy spinner long before Sirius carried em... and didn't cost anywhere near the cost you mention.

[@acanuck3267]

Did you say Janky? Brandon MacDonald wants his phrase back.

[@BenDRinkin]

FIRST!

[@renatugaming5730]

Wait, a new AJA video? Are you serious?!? *Please forgive me, that's a bad joke..*

[@twaho]

I hear you but I just don't like the name Sirius, I'm a Christian and Sirius is the biblical morning star Lucifer, an ancient symbol of satanic worship. It gets strange when it comes to hunting if you've studied scripture and other ancient texts and beliefs because hunting was relative to pagan gods, even the realtree 365 symbol... Google realtree 365 and tell me you don't see 666 not to mention all the other occult symbolism within commercial hunting symbology. Off topic but thought it'd be worth a mention lol.

[@feyrband]

How do you get Lucifer/morning star from the dog star that is Sirius? It's a greek reference (as is the case with most of their products) to Orion's hunting dog and constellation. Orion and Apollo being arrow shaft lines of theirs.

[@twaho]

@@feyrband You being Sirius? You'll find it in Isaiah 14:12 Lucifer is the English translation, take it back to the original Hebrew, means shining one, also known as the light bearer. The majority of ancient cultures worshipped this star, even today in the new age. Research the Isis, Osiris, Horus story, Babylonian mystery schools, the ancient and current world has been structured around these beliefs, Isis/ Ishtar/ Diana of the ephesians represented by the cresent moon and the dog star, also being the idol of Freemasonry, as the statue of liberty, the light bearer(rebellion against God) represents. There's more than enough information out there for you if you want to know it 👍

[@mikeguy9668]

You're reading to much into this shit

[@twaho]

@@mikeguy9668 I believe people aren't reading enough into it as it is the religion of the people who run the world, I believe it's very important.

[@mikeguy9668]

@@twaho it's pretty obvious the company names things after Greek mythology. I've spent hours on the phone with them and trust me they ain't satanic. You're really reaching, just like most religious people

[@luckytrapper7656]

I hope Sirius gives you a big thank you. Their sales is going to go up because of your review. Great video. I'm definitely buying one.

[@pensnut08]

Yeppers.. I just got one... Considering the price of the PR tester vs this one... No brainer.