Size Matters! Tamiya MF01X

[@alantaylor353]

40 MPH.!!! That's a fantastic result Mark.!! 👍 👍 👍 Thank you ever so much for the shout out, you've given me the biggest 😁😁😁😁 I'm so happy to have been able to send them down to you, they weren't getting any use sitting in my box O bits gathering dust.! You did an awesome job fitting it in there, it looked especially massive in the MF-01X chassis, I wondered how you'd squeeze it in.!! Thank you & the best of luck my friend.! As always, stay safe out there & the very best wishes from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🙏 ❤️ 📻 🕹️ 🔋 🚗 🚖 🚕 🚔 🚚 🚙 🚘 🚓 🚒 🚑 🚐 🚎 🚤 🚁 🛩️ 👍 👍 👍

[@MarkBryanRC]

Alan Taylor, Alan Taylor, Alan Taylor!!! 😁🤟😁🤟 Cheers Alan and it's all thanks to you with that fantastic and much appreciated donation package! You totally deserved the shout out my good man! Definitely got those parts put to good use, nothing goes on the shelf at Mark Bryan RC! I was worried that it wouldn't fit in the tine MF01X but a quick check of my other Tamiyas and donor rear arms were found! Same to you mate, keep smiling and always all the best from down here in the Midlands! 😁🙏🤟

[@alantaylor353]

@@MarkBryanRC 😁😁😁😁😁👍 👍 👍 👍 👍

[@yodadarksideGreenHawksRC]

Oooh Mark that's a whopper! I bet Barbara's beaver loves that one? 😂 😅 🤣 Great driving mate, and great speed for sure...... We can always rely on Mark Bryan to fly the flag for the brushed community! Brushed Motors are far from obsolete! Come on mate, I'm sure there's more gas in the tank dude. 😊 👍 👍 👍

[@MarkBryanRC]

It's a very big one isn't it James! Barbara's Beaver wants it for keeps! 🤣 This thing almost drives itself after all the tweaking I've done to it mate. Took some doing though! Well I do my best but there is no way I can challenge the top guys, it's fun to be in the chasing pack all the same. Big up the brushed brigade indeed! 😁 I need a faster motor than this, I'll see what I can cook up! Cheers! 🍻😎🦫🙏👍

[@AddamsPlayground]

Congrats on hitting 40mph!! I am glad it ended better than Rob's 3 wheeler. I am certainly happy it ended much better than my bag of parts I brought home also LOL! Onwards to 50mph!!!

[@MarkBryanRC]

Thanks Addam! Yes a relief getting to the 40 milestone but frustrated at the same time as I hoped it would go faster. But as you say I am lucky it wasn't a crashfest like you and Rob had so I should count myself lucky! Need a faster motor! I'd love to hit 50. All the best my friend! 😎🙏👍

[@TonyGardnerRC]

Nice work getting into the 40 club Mark..! That motor is just a tad on the large side! How very dare those people use the car park for parking their car, don't they know its speed run season 🤣

[@MarkBryanRC]

Thanks a bunch, Tony! I am just in the 40 club but need to go a long way to catch up with you my friend! Haha I was thinking the same about those selfish folk parking cars in a car park! 🤣Fingers crossed for our next runs, Tony! 🤞😁👍

[@gernotrametsteiner405]

Hott racing ❤💯✌🤩👑😎🥳

[@MarkBryanRC]

Thanks! We need more speed! 🤪🤘🍻😎🤞👍👍👍

[@Y_Beam]

wow thanks for sharing!!! keep it up!👍👍👍👍👍👍

[@MarkBryanRC]

You are very welcome and thanks for the support! :D

[@RCBirds]

Awesome run Mark. The size's very impressive and it sounds really good.

[@MarkBryanRC]

Big thanks Dirk, I'm glad you were impressed by the size of my enormous motor! 😂👍

[@thecontractor365]

Reckless driving and speeding in a car park - here come the rozzers..😂😂. Great speed dude, but unsurprising that an Arrma motor pulled off this speed - along with the go-faster sticker...😅. Interesting to see what your next 'secret' motor turns out to be. Have a top weekend man....👍🏻🙂👍🏻🙂.

[@MarkBryanRC]

Haha yes reckless and speeding, you got me red-handed, Guv!!!! 🤣 Yeah the big motor was awesome but I overcooked it in the next (unseen) run on higher gears... Back to a small one then! The secret motor is a BNIB vintage! More to come my friend... same to you, hope your weekend is a cracker! 🤞😁🤘

[@rc_michi]

Great fun at all, congratulations to the magic 40 😅🎉👊

[@MarkBryanRC]

Thank you very much, Michi - yes it was nice to hit 40 with a car that started at 14!!! Cheers! 😎🙏🤟

[@kimpestridge6668]

Congratulations Mark 40 mph. Brilliant 👍 great video as always. Take care 😅

[@MarkBryanRC]

Thanks very much Kim, it was a good milestone to crack... now if only I could reach 50! Take care too and all the best my friend! 👍

[@n22pdf]

Wow rapido Mark.. nice job dude.. have a great weekend celebrating whoo 😊Pete

[@MarkBryanRC]

Thanks! You too Pete, have a smashing weekend! I think I need a beer or 3 after this run! Cheers! 🍻😎👍

[@theoagrc]

Wow!!!!!! McMark is flying!! Great stuff bud 🙌🏻

[@MarkBryanRC]

Thanks Craig, I really wanted 42 to match Paul but it wasn't to be... even geared it higher but it was the same speed and I think I cooked the motor! Cheers mate! :D

[@catcancrunch7260]

Nice job 🎉40mph very good indeed, thanks for your upload mate 👍🙏🐱

[@MarkBryanRC]

Thanks a lot Cat! 🐈‍⬛ Yeah I was quite happy with that speed but really need to up my game if I can, the guys are so fast at the top! Thanks for always watching mate! 🙏😁🦫👍

[@rc-dom-uk]

that’s great mate . and really surprised as my old infraction had that motor and only hit 20. it shows how much chassis weight makes a difference 👍

[@druscanam]

For sure, you have to remember that's in a 4WD 1/8 scale vehicle. Once you put in a much smaller 1/10 scale 2WD with taller gearing it flys. Saw a video of a guy with a Redcat Piranha who put this 570 9T in his. Gearing was quite conservative, did 29mph on 2S then when on 3S he got a massive jump to 41mph so there seemed like there would be more in it with taller gearing.

[@MarkBryanRC]

Thanks! Yep scale size does really matter, as well as gearing of course. Too bad I can't use a 3S battery! 😁👍

[@MarkBryanRC]

Cheers Dom - oh yes I remember you had an Infraction but didn't know it had this motor in it! Size weight and gearing are huge factors in speed running! And not crashing helps! 😂👍

[@rc-dom-uk]

@@druscanam yeah the arrma was huge . it was obviously the mega but it just needed more power tbh . great chassis mind 👍

[@druscanam]

@@rc-dom-uk Yeah I had the vendetta. I use to track mine too. Even the brushless motor was too small. Not that it wasn't fast enough it was,I think it actually had the perfect amount of power for how much grip was available. The motor however only being 3660 in size did have to work quite hard to achieve that speed and power on just 3S too being 3900kv also. Honestly it should of been running with a larger motor with lower kV on 4S

[@coygtrc]

Fast and straight run, well done on PB 👏🤝

[@MarkBryanRC]

Thanks Gabriel, it does run very nicely now it's wider at the rear! Thinking about the stable DT02!!! Cheers! :D

[@martinwebster3943]

When you building the manta ray 😂😂😂

[@MarkBryanRC]

2026 at the rate I'm going mate! 🤪🤣👍

[@TeamJunkYardDog]

Very solid run! Thanks for the laughs.

[@MarkBryanRC]

Any time Steve, we are always up for some laughs!! Thanks dude but I need to find more speed somehow, your Mark is kicking my butt!!! 😂👍

[@TeamJunkYardDog]

@@MarkBryanRC You need the vintage modified motors from the glory days of brushed.

[@MarkBryanRC]

@@TeamJunkYardDog Thanks bud, yeah I'm beginning to realise that! The modern brushed motors are all from China and made of Chinesium!!! I'm on the hunt for a vintage one made in the USA or Europe!!!

[@TeamJunkYardDog]

@@MarkBryanRC haha

[@cw-01creations46]

Big Thumbs up for the Mc40 mph McMark 👍 Onwards to the Mc50 mph now dude 👍👍👍

[@MarkBryanRC]

McMany McThanks McPeter! I will try my best mate, I have 2 motors to try so fingers and toes crossed! 😁🤞👍

[@arronfrost2872]

That loooked really fast.Well done lads

[@MarkBryanRC]

Thanks Arron - yeah it looked faster than 40 to me! I reckon the speed meter is faulty! 😂👍

[@poorboysrc]

I swear, that PBRC sticker added the extra 4mph, it had nothing to do with the motor! Lol! -- I was a big fan of the slalom between the socially distanced cheerleaders. Too funny, guys!

[@MarkBryanRC]

Haha! 😂Right on Fil, that PBRC sticker is my secret weapon, I swear it gives an extra 10% top speed! 🤣 But seriously it makes the car look better! Glad you enjoyed the slalom, Lou has Covid 😮 so we were not taking any chances! Have a great day, bro!

[@markconnor269]

Great Mc run 💪 sure you can get more 😊 cheers Guys 🍻🍻

[@MarkBryanRC]

Thanks a ton Mark - yes I think there is more in the tank... hopefully!!! 🤪🤞👍

[@Toystheyrenot]

Nice run Mark and a great top speed too!👍😊

[@MarkBryanRC]

Many thanks, Sean! Happy to hit another milestone but still need more! Fingers crossed and cheers! 🍻🤞😎👍

[@barrycheesemore2928]

40 mph ain't bad mate, nice one!!

[@MarkBryanRC]

Indeed it is not bad! 😁 But I think I can squeeze a little more with a bit of luck! Cheers Barry! 🍻😎👍

[@outbackrcaustralia4895]

Nice run McMukka!😃👧. 40McMPH🎉🍻. That thing runs so straight 👌😳. Congratulations mate. A big hello from Sheila and Bruce in Oz😁👩🦘🇦🇺

[@MarkBryanRC]

Hello McCobbers down under! Yes guys, this thing now goes straight with the new radio and wide rear end!! Thanks for the wonderful support, it wouldn't be the same without my friends Sheila and Bruce cheering me on! Have a great week ahead! 😎🙏💙🦫👍

[@outbackrcaustralia4895]

@@MarkBryanRC Nice bit of engineering our Mukka👌. Hey nice seeing you on the guitar Cobber👍🍻👩🤠

[@MarkBryanRC]

@@outbackrcaustralia4895 Thanks Cobber, glad you got to see us in Bush Pig! They were the days! 😁😁👍👍

[@Paul__FC]

0:33 That's what she said! There is a whole lot of company in this 40mph club!

[@MarkBryanRC]

Haha yes she did pal! 🤣 But yes, it's getting tight in the 40 club, glad I just squeezed in there! 🤪😁👍

[@Paul__FC]

@@MarkBryanRC yep, I'm doing a motor break in today. I just need to pick up more oil and cleaner before I get started.

[@MarkBryanRC]

@@Paul__FC Hope all goes well for you pal! :)

[@rivierarc]

Welcome to the 40 club dude!!!!!😊😊😊😊

[@MarkBryanRC]

Thanks Glenn, glad I could join you but you have 2mph on me! I need to try harder!! 🤪👍

[@rivierarc]

@@MarkBryanRC yes, yes you do 😜😜😜😜

[@MarkBryanRC]

@@rivierarc 🤪😅👍

[@madsrcbuggy]

Oh, this is awesome, Mark! I had never heard of a 570 motor before, but it's doing great in your MF! I bet you can keep gearing it up, it'll never be short of torque, he he! And good job with the speed increase, and keeping the car under control, also coming off throttle, I bet that radio helps a lot! Goodtimes, buddy!

[@MarkBryanRC]

Hi Mads, glad you think so mate! Yeah I'd never seen a 570 before Alan sent it to me!!! Unfortunately it didn't like higher gearing (as like you, I thought it would) and I think I smoked it! Short but sweet! But yes, the ABS on the radio is a game changer, so much easier to handle. Thanks for the great words, all the best to you my good friend!

[@TamiyaTalkRC]

Nice mate!! Well done

[@MarkBryanRC]

Thanks a lot mate, much appreciated! :D

[@lo2713]

Cracking result, to be fair the car looked pretty stable aswell, interested to see/hear more on this next motor 🤔

[@MarkBryanRC]

Cheers Richard, yeah a decent speed and after all the messing about with the settings it runs nice and straight now! Ah, the next motor will be my LRP10T followed by an old one! :P

[@lo2713]

@@MarkBryanRC send it 👍😁

[@BasBoyRC]

40mph nice but it did look fast.

[@MarkBryanRC]

Thanks Mal, yes it does scoot along very well now! Cheers! :D

[@MauzyrockRC]

Awesome brushed run mate!

[@MarkBryanRC]

Thanks a ton mate! More to come I hope! 🤞😎 👍

[@aviano72]

The rozzers may have set up some speed cameras in that car park 😉😆 Crowd is still under covid-19 restrictions 😂

[@MarkBryanRC]

I think you're right Are! I heard they are gonna set up a roadblock next time to stop the runs! Covid still rife here mate, my wife has it right now! 🥲

[@aviano72]

@@MarkBryanRC Oh sorry to hear about your wife Mark. It's nasty for some. Like myself i have now not worked for over a year because i still fight with the aftermath of covid. I get tired and my body hurts so much for doing just nothing 😵‍💫

[@MarkBryanRC]

@@aviano72 Thanks mate, that's appreciated. Sorry to hear of your health issues, that is so not good. You might be surprised to hear that I suffer exactly as you are! Damn that epidemic! 😖🤬

[@PeteWylieRC]

Oh wow that was not only fast but really stable too. Well done on the 40mph and like you say it might be able to take a bit more gearing. I'm taking you haven't done the Jack O Trades mod yet? That adds a load of gearing so you ought to be in the high 40's if the motor can take it. Anyway good stuff mate. I have had another go but haven't beaten my speed so I'm holding onto that video till I've mended the car (again) and had another try. I haven't quite got to the part of the day where I'm having a pint but I soon will be. Enjoy your weekend mate 😁🍻🍻

[@MarkBryanRC]

Hiya Pete! Yeah I think I got this sucker dialled in pretty good now, pity it's not a bit faster! I tried the higher gearing and cooked the motor, I was surprised because I thought it had the torque to pull it. So yeah this was on ludicrous gearing! Looks like we are in the same boat stuck on our current speeds. This speed run malarkey can be frustrating, can't it?!?!?! Hope you enjoyed that beer and are having a good weekend mate! Cheers! 🍻😎👍

[@rcprescription]

Y’all are to funny! Social distancing!😂🤜🤛

[@MarkBryanRC]

Glad you think so! Haha yeah, social distancing is sadly still a thing here, my wife has Covid!!! 😭👍

[@rcprescription]

@@MarkBryanRC oh man! Hope she gets better soon… it is still going around here to… no social distancing though. Good luck in your runs! Keep making us laugh!🤜🤛

[@MarkBryanRC]

@@rcprescription Many thanks for the well wishes! She has been very ill but is improving now so all good! We will keep trying, I have 2 motors left to run, fingers crossed 🤞🤞We'll keep it light-hearted of course!👍👍

[@rcprescription]

@@MarkBryanRC always look forward to your videos!👍

[@NBC_NCO]

Looks like the added weight over the rear helped.

[@MarkBryanRC]

You could be right about that. Also the wider track with those new arms helped too I think! :D

[@NBC_NCO]

@@MarkBryanRC Like an arrow.

[@MarkBryanRC]

@@NBC_NCO 😁✌👍

[@Acheronus80]

TL-01LA arms work lovely, got mine 0-35-0 in less than 50m... I need a bigger road!

[@MarkBryanRC]

Thanks for the tip and wow that's good going for only 50m!!! Definitely need more space! 😁👍

[@Acheronus80]

@@MarkBryanRC TL-01LA front end bolts straight on, at the rear use TL-01LA lower arms, CC-01 front driveshafts, MF-01X knuckles and uprights, and 42mm upper turnbuckles.

[@MarkBryanRC]

@@Acheronus80 Great stuff - many thanks for sharing! :D

[@chrisscott3039]

👍😎

[@MarkBryanRC]

Thanks Chris! 😎👍

[@Nic-bd6bj]

now on 12s! hahaha

[@MarkBryanRC]

Haha! 🤣 Now you know how that would end! 😂😭...

[@stevemoon2136]

FASTER!!!

[@MarkBryanRC]

Just a bit Steve! Need more speed!!! Cheers! 🍻😁👍

[@drownedoptima]

Is that speed sticker result available for the rest of us? Does it confirm to ze rules of brushed class? Lol

[@MarkBryanRC]

Haha! Oh yes, Fil has approved the addition of his speed sticker even though it is known to add 4mph to your top speed! 🤣🤪👍

[@druscanam]

With that size motor it's not an MX-5 it's a Bullet Roadster 😅(if you don't know what that is look it up) Congrats on new PB. Hope you can squeeze more out of this one with gearing. I'm guessing you will given its higher torque. Also fyi these motors (when put in a 1/10 2WD vehicle) are good for 3S. I know doing that will no longer make it eligible for the speed challenge but I think it's work doing just for fun after the speed challenge is over😂

[@MarkBryanRC]

Haha oh yes the Bullet with it's V8, I see what you mean! Thanks for the congrats... But I tried the higher gearing and cooked the motor, I was surprised because I thought, like you, that it had the torque to pull it. Good call on the 3S run for fun at the end, I might just do that! Cheers! 🙏😎👍

[@druscanam]

@@MarkBryanRC Sorry to hear you cooked the motor, that's a shame. I would try the WLtoys new 560 size motor. I own a 124012 and I just today have put 4 2200mah 3S packs though mine on the track with the only mod being a larger heat sink and it's been fine. Speed matches my brother's 124010 brushless on 3S. It's a very smooth and quite brushed motor too. Much smoother then the 540 and 550 motors WLToys use to use

[@MarkBryanRC]

@@druscanam Thanks again for the kind comment and the tip about the WLToys 560, I'll look out for that! Sounds like your 124012 is a little missile! Cheers! :D

[@Muffin-g2k]

4:53 Loser gets to pick up the trash back there.

[@MarkBryanRC]

I know Jess, what a mess! But your radio saved my car from tumbling on braking! Cheers!

[@Muffin-g2k]

@@MarkBryanRC Been gearbox modding a tamiya dt. Works great but weather gets in the way all the time. Strom alerts.

[@MarkBryanRC]

@@Muffin-g2k Same here with the rain, Jess! Oh the joys of tinkering with an RC gearbox! :D

[@scaleworksRC]

Good episode as usual, and congrats on the Mc40!

[@MarkBryanRC]

McMany McThanks McMate! Now just to find another 10mph! 😂👍

[@scaleworksRC]

@@MarkBryanRC 😄🤣😂