GEISER PERFORMANCE CLUTCH HOUSING LINER CAN AM X3 EP 160

[@GLifeUTV]

Discount for Geiser parts only. 10% off code FrankG at www.geiserperformanceutv.com/

[@Randy_84]

I went with an all aluminum clutch housing and quick disconnect t-pins. Game changer 👌

[@GLifeUTV]

Seen that from a Kenny R. Those tpins are $.. Which ones did you go with

[@Randy_84]

@@GLifeUTV hightech power sports.. I had the liner for a little bit, but after two belts exploding, it cracked the plastic housing. Buy once, cry once 🤷‍♂️

[@GLifeUTV]

@@Randy_84 i bought the rpm housing. Glad i did

[@GLifeUTV]

Any links ?

[@Randy_84]

@@GLifeUTV didn't know they made a full housing.

[@dannyelliott8391]

I put the same liner on a few weeks ago. Wasn't much more difficult with the clutch housing already in place. Right angle drill and short drill bits. Now you need to do the Alba Racing quick disconnect kit. Use a universal socket and a nail to get the posts in.

[@GLifeUTV]

Yea your right. This one was already trashed tho..lol.. this was a customers car. On my personal x3 i have an aluminum housing so i can use the alba racing quick disconnect kit.. its a dope option tho

[@dannyelliott8391]

@@GLifeUTV Yeah, I realized it was a customer car after I posted. lol, my bad. It would be cool if you did a follow up video on that customer if/when he breaks another belt to see how well the liner held up. Lots of differing opinions out there to the durability.

[@GLifeUTV]

@@dannyelliott8391 yea its a good idea. Hopefully he doesn't have any issues. We shall see👍

[@CascadingDream]

Great video. Those aluminum liners always made me wonder if they would allow water in where you drilled the new bolt holes. If I end up with one I'll probably seal the holes with silicon. Thank you fo the discount code.

[@GLifeUTV]

Yea a little silicon would work. 🤘🤘Yea bro👍

[@Slappyracecars]

I'm rocking a Dritbag custom Carbon fibre liner. A few blown belts and no issues whatsoever. Keep up the videos bro you guys fucking crack me up.

[@GLifeUTV]

Nice. MY buddy Cj is doing the carbon fiber liner aswell. not sure what brand tho

[@dafatrooster8104]

Good video man, thanks for the discount code.... someone really disliked this video already? that's some straight ass hate from being jealous right there.. lol

[@GLifeUTV]

Haha. Yea. Dude shows up early too..haha.. thanks bro

[@mandytuning]

I recently bought boondocker uhmw liner to give it a shot,we use a lot of uhmw on my job and it absorbs and dissipate impacts way better than aluminum.

[@GLifeUTV]

Sounds like a good option.. uhmw is awesome. I need to get some uhmw for my skid plate it is shot.lol

[@adamgutierrez3261]

Question...bolts to engine dor 2ndary and to primary clutch & puller.... turn opposite of lefty loose, right tighty? Correct? Confirming, i will set my impact right to loosen? Thanks, good videos.

[@GLifeUTV]

Everything is right y tighty.. no reverse threads

[@mtfrf1]

Great informative video. Trying to use the FrankG code and it says invalid

[@GLifeUTV]

Sorry this code excited after 2 months

[@tommys_world414]

Hey frank!. FYI you need to add like 12 to 15 more bolts on the liner for it to work properly . Trust me I learned the hard way!!lol. Belt will break and grab that thin aluminum and bend it into the clutch and scratch up the sheeves!. Makes a mess!!

[@GLifeUTV]

🧐really. That sucks to hear. It was a customers car. He wanted it on there. Hopefully he doesn't have that issue. Thanks for sharing bro😅

[@tommys_world414]

@@GLifeUTV he'll be back!!. Lol.

[@GLifeUTV]

hahaha.. recheck. I have the mrrpm housing. my buddy cj is gonna run a carbon fiber liner.

[@tommys_world414]

@@GLifeUTV hell yeah ballin!!

[@mikemendez8665]

If your going though all that, would it be better just to replace the whole housing with something stronger than plastic

[@GLifeUTV]

You could replace it with mrrpm aluminum housing like i have on my x3 but its also 500$

[@mikemendez8665]

@@GLifeUTV that’s not bad then I don’t ever have to worry about breaking the housing

[@GLifeUTV]

@@mikemendez8665 true

[@mikemendez8665]

Looks like MR.RPM is out of stock is he the only company who makes it?

[@GLifeUTV]

@@mikemendez8665 only one im aware of.. hit up corona motorworx. Sometimes they have them in stock

[@jandpc4176]

what impact are you using and what setting did you use to put the primary back on?

[@GLifeUTV]

Should be torqued to 89 ft lbs..and rechecked after heat cycled

[@101rotarypower]

Any opinions on the secondary transmission seal guard? Anyone ever see or hear of a failure where that would have helped?

[@GLifeUTV]

I installed a zrp guard on my X3. Is it needed??? Not sure. No personal experience with the belt damaging that seal. But for 40$ might as well if your in there🧐🤷

[@danielgonzaga857]

I would go with a aluminum clutch housing is my oem housing broke

[@GLifeUTV]

Yea thats what i did. I think this a good option to install before your housing breaks🤷

[@chriszuniga2680]

Hey bro what washable air filter do you recommend

[@GLifeUTV]

Stick with the oem air filter unless ur running a particle seperator.. i run the s&b washable air filter and the s & b particle separator

[@SillyRabbitV3]

Make a video on how to replace clutch rollers, and also some better options or upgrades to the stock ones! 😅

[@GLifeUTV]

U got it😁

[@doc559]

🏆🏆🏆👍🙏 Thank you for sharing

[@GLifeUTV]

Thank you too

[@punchoffroad3741]

Great video wit helpful direction. You guys always crack me up too. Also thank you for another discount code! Love those they help out!

[@GLifeUTV]

Thanks bro🤘🤘

[@henryavila5454]

Hey bro Henry here just wondering if you have changed your sparkplugs... yet ?

[@GLifeUTV]

Not yet. Have them on the to do list

[@henryavila5454]

Yeah me too

[@quadx45]

That clutch housing is an engineering fault if they keep breaking like that every time the belt breaks. Why doesn’t can am fix or replaces that part . Should possibly be a lemon law complaint so that replace it with an aluminum one. $32000+tax buggy not happy if it was to break on your first ride😤😭😩

[@GLifeUTV]

Hopefully they address it on the next iteration. The rzr pro xp does have an aluminum housing.

[@FreedomIsntFree2023]

quadx, I don't think you have a full grasp of what the California Lemon Law actually covers and how it works.