Skipping This Service COULD KILL Your Motorcycle! (Valves Explained)

Looking for motorcycle gear that is high quality, safe, and cheap? Shop at shop.yammienoob.co ! Beginners LOVE our prices and gear. Every $1 you spend is 1 entry to win one of our giveaway motorcycles.
Sign up at yammienoob.co to get access to our Discord Server, all your entries to win our giveaway motorcycles, 10% off twisted road rentals and more! Get started for as little as $5/month.
Get your next motorcycle from www.rideeurocycle.com - they are the exclusive dealership that we use and we trust them with every bike we buy to give away!
Congratulations. You’ve made an excellent choice by watching this video. You could have picked any motorcycle video to watch, but you chose this one. That’s because you are a cultured person, one of discerning taste. And when it comes to motorcycle channels on KZbin, we here at Yammie Noob deliver unparalleled memes, knowledge, and comedic twists on riders around the world. You’re going to want to subscribe. This is the greatest motorcycle channel on KZbin.
Our Best Selling Street Glove: bit.ly/valencia-street-glove
------------------------------------------------------------
Best Beginner *Sport* Gear:
Helmet: bit.ly/SS900-Helmet-ECE
Jacket: bit.ly/wapenshaw-jacket
Gloves: bit.ly/valencia-street-glove
Boots: bit.ly/Z1R-Boots
Best Beginner *Dual Sport/ADV* Gear:
Helmet: bit.ly/SS2600-ADV-Helmet
Jacket: bit.ly/Hammer-Down-ADV
Gloves: bit.ly/Firstgear-Airspeed
Boots: bit.ly/AR1-Race-Boot
Best Beginner *Retro/Classic* Gear:
Helmet: bit.ly/Arai-RegentX
Jacket: bit.ly/Armored-Shirt
Gloves: bit.ly/4SR-Monster-Gloves
Boots: bit.ly/CTA-Leather-Boot
---------------------------------------------------------------
FAQ:
What should my first bike be? A Turbo Hayabusa.
Very funny, no seriously. What should I get? A TURBO BUSA.
What is this channel? The premiere source of motorcycle edutainment (educational + entertainment) on KZbin. We take on everything from the best bikes you should buy all the way to praying to our lord and savior Rossi.
Why should I subscribe? Because you want the highest quality motorcycling videos on KZbin delivered to your feed every single day (seriously, we do daily uploads)
Why do you guys make these list videos? Like any good capitalist, we supply the demand the market has.
Music: amplelife.bandcamp.com/
NOTICE: Elements utilized from other videos are fair use and fall under U.S. copyright law because it is transformative in nature, uses no more of the original than necessary and has no negative effect on the market for the original work. It is against the law to fraudulently claim a copyright on a video you do not own under the DMCA or to abuse KZbin’s copyright claim tool.

[@gregerymarshall5101]

Keep these tech talks tid bits coming. I'd be a great side discussion for the channel.

[@kerrykalls7732]

I did a valve clearance adjustment with zero past experience and a Haynes manual leisurely over a couple weekends in the winter. Triple checked everything I did and kept all bolts in a cardboard cutout that mimicked the valve cover and cams etc. Turned out to be a perfect job and '06 636 still going strong other than needing another throttle body tune 4 years later

[@robertward1461]

Hell yeah... seriously considering learning enough to do this service myself too. Figure I'd pretty much be paying myself the $500+ it would cost me to have it done somewhere else, to learn myself. Long as I take my time and follow instructions I should be good. I like the cutout idea for the bolts.

[@brantleycombs3088]

How do you know if you need a throttle body tune?

[@macc1370]

Just did valves on my xsr700. Took me the whole weekend but felt great to learn some new stuff

[@at9670]

Which tutorial did you follow? KZbin?

[@ChrisG1392]

I think I've had a bent valve for about 8 years and 60k miles now. Marginally less power, makes a noise, but still runs (like a Honda).

[@ethansimpson4606]

lmao

[@ChrisG1392]

They say it's a belt tensioner pulley but I say bent valve. Who knows

[@lumine7653]

With a bent valve, you'll have no compression on that cylinder. It will run rough, vibrate more and the exhaust sound would be drastically different than before.

[@JayVee53]

Can you describe the noise? Would it be a slight rattling?

[@bve7397]

Just service it lol

[@MonstaFreak13]

Mechanic here, 1) spite isnt completely wrong about the valves being bigger and smaller than eachother for the straw reason, cus he broke it down barney style. but the larger factor in the intake valve being bigger is due to atmospheric pressure. 2) When he said shops charge by the hour, he is correct, but that doesnt mean shops get paid for the entire time they work on your vehicle. For the most part there are set labor hours for each job and each vehicle. The cost differences usually come from labor rates which are typically higher in big shops that have larger overhead costs and where they typically do everything by the book to extract every cent they can per job. For example your local dealership is likely to charge more for a job that a small shop would do for less cus their shop is small and it costs less to run

[@figol6272]

spite is missing parts regarding valve lash and 2 add head heat is a variable as well regarding power

[@figol6272]

porley ajusted valves can cause power lose and bad fuel consumtion

[@shyxguy6300]

wait wait wait. Valves get tighter clearances?? I thought they wear out which means the gap is bigger

[@diyeveryday67]

Most techs are paid on “flat rate”. Tech gets paid X hours by dealership regardless the tech requires more or less time than X. The labor time for a job is set by the manufacturer and does not vary. A good tech can earn 60-120 billed hours in a 40 hour work week.

[@icandsc]

I pose the same question I just commented to you : I've been reading up on this all winter, in preparation of doing my first scheduled valve job on my 83 cb1000 (my uncle was the previous owner, and didn't ride it much at all - its only just now at the 10k mark, and showing signs of needing adjustment). the main thing holding me back from doing the job at this point is the availability of the shims, because I don't know what sizes I will need until I start the job, and once I know, I will have to order any shim sizes that I don't already have. But I want to know - because checking valve lash and changing shims could potentially drag out the job because of shipping time, why not just order brand spankin' new valves and solve all the problems in one fell swoop?

[@nicholassilvestri1804]

Can I just say, the guys at Suzuki were saints when they put the screw/lock nut valve adjuster on the oil cooled GSXR's and Bandit engines. Takes literally 2 hours start to finish on my B1200

[@fredjunca]

The best engine 👍👍👍👍👍👍

[@Clawzz299]

As a newer rider, I like these tech segments. Learning about the inner workings of a motorcycle is quite dreading since there is so much going on and information is spread around everywhere.

[@cameronduplessis9479]

I'm studying mechanics at college and this actually helped me get up to speed, cheers guys✊🏍

[@riellydoyle6126]

Absolutely love these type of learning videos. I could literally watch these all day. Keep it up

[@scottarmbruster7759]

Good job Spite and well explained An excellent episode for those out there getting into bikes and aren’t mechanically aware

[@Joslin2311]

I really enjoyed this one. I hope to see more content like this. I'm a mechanical noob so it was super helpful to see it broken down

[@santiagoardilesgonzalez6451]

I used to have a 200cc SOHC 4 valve 3 sparks single cilinder. It runs a sweet 10.000 rpm redline. Man I miss that bike. It was Bajaj Pulsar NS200 and had the BEST 200cc engine of them all.

[@TheAbhi945]

this video came in at a very right time coz i used to wonder why we need to get the valves serviced at some intervals and what is the significance of that,but now i know so thumbs up to the team

[@StormBringerVids]

I love the technical explanation. I would be curious to see more like this.

"It's super super reliable when it works".

[@wilremington6262]

As someone recently into motorcycling, started halfway through last season, this was absolutely perfect for me. I have a 2003 Yamaha FZ1 with 28k miles on it, so these were exactly the questions I've been asking.

[@0Rookie0]

26k+ miles on my '02 FZ1 and.. I think I feel "better" about pushing off the valve check after watching this video? Luckily it's a check and not an adjustment at 26k. These bikes are amazing, but I learned quickly that cold tires and second gear can be a bit hairy. No rider aids, ride it like a man haha. Make sure you set your suspension up. Even vaguely. It changed the bike for me. Also it has some of the best online and forum support known to man. Angelfire and cartestsoftware ftw!

[@tarnishedsquid2967]

I quite enjoyed this video. I really need to get my hands dirty more and maintain my motorcycle myself. I always just take it to a shop, when in reality most things can be done on you're own.

[@jonathan84166]

I just got into bikes and your videos are so enlightening !!

[@brucearena]

Great detail on explaining difference in intake/exhaust valve sizes

[@Mrdietryon]

Love this video and I could totally listen to an hour long version of this!!

[@mmuller199]

Spite is the only reason I still watch this channel. Great video, keep it up

[@havikhobbies]

Valve clearance exists to ensure the valve closes fully so it can correctly seal against the valve seat. The valve is also cooled every time it seats, transmitting its heat into the cylinder head. If the valve train wears in way that the valve clearance is zero. The valve cannot fully seat in the head. Gasses can bypass causing a possible missfire and it and will overheat because it cannot transfer that heat to the head. A loose valve is a happy valve (until its way loose/loud) diminished clearance caused by lack of maintenance will eventually damage the valves, particularly burned exhaust valves are a common result.

[@zyonsdream]

Some bikes really require attention to the valves and some don’t. I had 48,000 miles on my CRF1000 Africa Twin and never touched the valves. Started easy every time, maintained consistent gas Milage, no abnormal noises or smoke. Ran the same from day one. Stock exhaust and filters and I didn’t ping it off the limiter. Bike was awesome until it got binned by a mini van.

[@richardcerritelli9657]

I thought the African twin was self adjusting valves I thought you didn't have to touch them.

[@zyonsdream]

@@richardcerritelli9657 I don’t know about the newer CRF1100 but the CRF1000 that I had used shim under bucket adjusters on the exhaust side and set screw on the intake if I recall correctly. I’d have to look at the shop manual to reconfirm that.

[@MrAlexshellard]

100% more of these please my dude!

[@hvymax]

I did the MC mod on my KLR while I had it apart. It's also the perfect time for performance cams. I neglected mine for 30,000 miles till the valves weren't closing all the way when warm.

[@nbayard]

Sucking isn't harder than blowing. The straw analogy is a red herring because it's based on your anatomical limits. It's about pressure differential. Atmospheric pressure is way less than the pressure inside a post-combustion chamber.

[@thierryfaquet7405]

Actually no, the straw analogy is quite accurate. It’s all about compression and depression and your thoracique muscle can compress air and can obviously depress when sucking trough a straw.

[@AllanOhare-wx3wr]

Most important part of ridining and maintaining your bike!!!!!

[@walker2837]

Good stuff. More of this type of content please.

[@ariachemodanova9251]

Awesome vid. Very informative!

[@CaptainFeathersword]

Awesome vid, Spite!...more like this please!!!

[@johnmonsalve11]

Great great video. Will that shop let to do a video(s) of that service being done?

[@poledancerz1]

Excellent video. I love this stuff.

[@silverbullet836]

We need more technical videos like this!!

[@MrEiniweini]

One of the selling points for the Sportster S was that you did not need to service the valves. I know bugger all about engines but I am happy now. I am likely to put over 15,000 miles a year on it.

[@Shortley]

How are you liking the sportster s? I had a chance to ride one and kind of turned it down, regretting that now of course. Lol

[@MrEiniweini]

@@Shortley It is surprisingly good. The clamshell seating position is not as bad as I thought it would be and the torque on it is insane. I daily commute with it and although going to work will never be your favourite thing to do ((unless you have a really nagging wife), I actually really enjoy the ride in. Rear brake is pretty weak but everything else is great.

[@richardcerritelli9657]

How does the bike ride I was always at the high-performance I have a Hayabusa I think about going over to like a cruiser sports bike combo I'm definitely not a Harley person what is the bike comfortable and does it have a lot of performance torque speed cuz they look nice the bike there more sporty now

[@MrEiniweini]

@@richardcerritelli9657 I like the ride position and power. It cruises at 4,000 RPM and that is the low end of your power band, so there is no grabbing down to get power or sitting at 8,000 RPM. The torque is on tap in the bikes sweet spot. I had to pay for a new seat though because the standard one has no back to it and you are on a 3.2 second bike (Corbin Gunslinger). I also got a 40mm up and 25mm back bar riser to reduce the clamshell ride position.I also got the HD windshield to take the air off my chest. It is worth a test ride but keep in mind that you will want to change the ergonomics if you want to enjoy it. The good thing is, it is a Harley and you can change it.

[@craigbomer8962]

I had a coworker with an 80's Yamaha 450(I think)cc parallel twin. He put a TON of miles on it and did all his own work (we're mechanics). He told me that the last time he checked his valve clearances, some of them had worn their valve seats so far into the cylinder head that there wasn't any room left for shims! He figures he has gotten his money's worth out of the bike and he'll replace it when it finally gives up.

[@eyeperture]

excellent tutorial! Thanks a lot

[@sandspike2929]

I have a NC700 that I bought at 4000 miles. It probably had one valve check at 600 mile breakin checkup. I was under the mistaken notion that if the valves are not ticking, it is fine. And that the valve gaps get bigger with age, not smaller. So now I have 44000 on it and have missed 5 valve checks. A buddy of mine who has tons of MC knowledge convinced me that the valves needed adjusting and that I was risking my engine. And that I could do it myself. I do have the shop manual. So, after watching a video of it and reading the manual, I went to work. In the end I found out that my intake was 43% reduced and my exhaust 30%. After several hours of climbing the learning curve and calling my buddy for advice. It was done. First thing i noticed was smother idle. Today I took it out on the highway and what a new burst of power. Acceleration was Noticeably better. I will never forgo the valve check again. It is not really very hard on the NC700x. Anyone with tools and a modicum of mechanical ability can do it.

[@Idlehandzx2]

I love these types of videos

[@johnvirginia7238]

Thanks for the video I bought a 2015 ZX 6R with 16,000 miles on it 7 months ago and now I have 20,000 miles on it and I’m about to do this service myself. The engine is not making any sounds, but I like to follow the service schedule . I may even link up a tech on Facebook groups that I can pay to help me for the first time. I’ve already bought the service manual. I ride year round so it looks like I will be putting about 7k miles per year on this so I have to keep it maintained

[@itsshey1644]

I love this because even though i dont have a bike im learning so much

[@natvega1]

I'd say the hardest part are the cam cap bolts, you can rare-ly tighten to spec with a bike that has many miles, the cam cap threads become weak, so if your cam cap bolts are 11ft-lbs by spec you might want to go with 9 or 8.😮

[@GalamatiasOne]

I just adjusted the valves on my CRF250L last weekend. Both of the intakes were in spec, but both of the exhausts were out and had to be re-shimmed. At least on that model, it is definitely worth doing your own over the price you'd pay at the shop...yeah, it was a little bit of a pain in the ass, but anyone who is mechanically inclined should be able to do it in a couple hours or less. Anyway, I spent $80 for a shim variety pack and used 2 out of hundreds. If anyone is planning on doing a valve job on a Honda (7.48 mm shims), I'll sell you a shim kit for cheap!

[@karlfonner7589]

Thanks for reminding me. My cam chain is a bit stretched. I have a hornet with 85,000 miles on it. It still runs but I treat it like a senior citizen

[@zynetik]

VW VR6's cam chain and cam tensioner have the same issues as inline 4 bikes. You have to be wary of not having a bad tensioner or not skipping teeth. Most people end up selling their VR6's to avoid the same issue.

[@John_Ridley]

If the wear is on the valve seat, then the valves can sit higher and higher, reducing the lash. If the lash gets to zero, then you start getting the valves not sealing completely, and you can burn valves.

[@cyberblakk]

I really love this channel and watches every video I could. I hope someday I'll able to afford a real motorcycle but as of now I only have a scooter honda adv 150. does scooters need to be checked like this also?

[@xEndgameRA]

Please make more of this kind of videos

[@abyssflight3907]

the valve service interval for my TW200 is only 3,000 miles but on the other hand it's such an easy thing to do on the T-dub it only takes about 15-20 min.

[@sleeper.simulant7327]

I took my riding test on a TW200, I really want one now lol

[@horakilta]

Your seats wears the most and valves in the end stays a bit open which which can be heard as dropping revs slowly. If not completely shot they can be lapped and shimmed to spec again... ]

[@trevonstewart3636]

This is where spite excels

[@ijustfelldown]

I have a 50,000 kilometer Honda CB Unicorn (CB 150) and not even the official Honda service centre near me would check my valve timings. It's very rare to find mechanics who are good and confident enough to do valve service.

[@kauklend2848]

I own a VFR800 Vtec, I am not gonna do my valves... Very informative video though, keep it going as always!

[@kevinlugonzbi6005]

Love this video! Desmo is interesting because some did have non DOHC configuration. Also, weird one for you: Triumph Bonnevilles switched from DOHC back to SOHC in 2015-2016! Lost power, but gained torque and went water cooled. Really curious what motivated that decision. Would love more of this content too!

[@lasskinn474]

yamaha does sohc 4 valve on some small but not smallest single cyl engines. I think honda does too. you need a swing arm kind of a thing but it's not like you couldn't do it. it can save some space.

[@MansterBear]

@@lasskinn474 my VStar is SOHC 8 valve.

[@Motoboo_Marine]

Africa Twin motor is SOHC too iirc

[@KrazyKanucker]

Hi Spite, maybe a quick rundown on finger followers for the next vid? For example, the one on Duke 390? I've read through some articles and watched some vids and still trying to get it clear in my head. Search "Camshaft finger followers explained south bay riders" for a good explanation. One key point from that explanation: "To gain low-end torque you want a shorter duration (shorter total valve-open time), however for top-end power you need a higher lift [maximum opening of the valve], which requires a very aggressive profile on the cam [i.e., a high rate of valve acceleration as it opens], which you can achieve using finger followers but not [with] a bucket-and-shim system."

[@VegasDave3000]

I was surprised you didn’t briefly touch on the next evolution from DOHC, FreeValve! 30 seconds more, and a really cool idea if it makes it to motorbikes!

[@irzekk]

Love love this content

[@mgkleym]

There is a big exception to the use of overhead cams. The ls moter family over at gm uses push rods.

[@reggylippens6259]

very good tutorial perfect explained ......if you buy sportbike learn to work on it by the original bike manual cost more but thats most accurate ....in belgium valve job can cost you between 350 eu to 500eu ....thats 380 to 550 usd btw....550 usd is worth to learn work on your bike but valve job most be done perfect like spite say you can total ruin the engine

[@tylerblais9296]

Love the content… Spite, so your thang “not so noob”

[@ElectronNinja]

Doing your own valves is totally worth it if you have mechanical skills and want to try it (and save some cash too!). Agree with Spite, try your hand on something simple first, or, go do the more complex job with a friend who knows what to do.

[@ElectronNinja]

@@alastairtheduke Especially on a complicated machine it can be daunting, but if you have the factory service manual, engage your brain, and take your time, it's really no different than following some Lego assembly book. Still HIGHLY recommend doing it with someone who has mechanical experience though if you've never done it. Manuals don't talk about troubleshooting skills, how to deal with stuck bolts, etc.

[@elishatilley4091]

thanks man

[@ChrisGuthrie]

Fact - out of spec valves on a 07 yz450 can snap your leg in half with the Kickstarter.

[@East_TX_LCR]

More videos like this please Spite.

[@devilsbreath5917]

Great video

[@getty6974]

It would be quite interesting if you actually made a video about Spite doing his klr or 690sm valve clearances.

[@samus4799]

Notable exception to the DOHC setup, 300cc Hondas have a rocker arm. That way only a single cam lobe needed to move both intake or exhaust valves. Saves cost, rocker arms are much cheaper to manufacture than cams.

[@PremierNZ-qb5zd]

The only problem with this is that quite often the cam lobes can have a different profile between inlet and exhaust, this is so you can get a more efficient engine and generate more power.

[@257796]

Good job Spite

[@scorpio1710]

Love it! More!

[@scorpio1710]

Is this spam yammie?

[@scorpio1710]

I called Yam

[@scorpio1710]

Why you doing me like this Yam?! Is it spam? Is it a V4 spicy meatball?!

[@someguy9520]

My 98' deauville still has SOHC. The successor (2006-2012) also has SOHC with 3 valves/pot In forums they did valve checks like suggested by the manual, but they discovered that it went out of whack only by 1/10 of the maximum allowed clearance after 50.000km So most users dont do em(just in this case with this engine)

[@stuartgreig6609]

Good video, as I don't have a modern 16v engine it's not really relevant to me. Mine is DOHC 16v but nice and early so still has rockers and screw and locknut adjustment so easy and simple to do. Also I'd disagree with some of your generalisations, my CX had pushrods but 4 valve heads, my Rotax single had a SOHC with 4 valves. I do wonder sometimes if the move to bucket and shims was more to do with manufacturing costs? At least we don't have snappy snappy belts like cars. 🙂

[@epicfacecanada]

As I understand it the reason for the switch to shim-style valves over the old screw-style valves is because of 1. Smaller Packaging (particularly for DOHC) 2. Less weight. Allowing the valves to work better at high RPM

[@Adhanks91]

Good lord this is an important topic, that being said, valves are something Ive never worked on. Don't really trust a shop to do most work, but damn I really hate taking the engine apart

[@thinkingimpaired5663]

Mo Powah 4 ever. Kawasakis are easy to adjust and usually stay in adjustment for a long time because of the valve bucket over shim construction. The math is really simple as well.

[@hotchihuahua1546]

One of the most overlooked services . There is a partial reason why this service is not being done and it’s a gamble . It’s labor intensive and costly if you can’t do it yourself . If you wait to long a valve adjustment won’t correct the damage done to the rockers , cams , valves and seats .

[@_davidsuciu]

Thank God i only bought a 2 cylinder bike.. 16 valves seems like a huge pain to adjust, but 8 doesnt sound that impossible..

[@hvymax]

I miss the screw and nut valve adjustment. Easily done in minutes. My KLR was down for a week waiting for shims

[@Alex__Creations]

i loved the video!! :D

[@peterhallbus1114]

would not mind an hour long detailed video about valves ;)

[@MorrisAutoPerformance]

Hey I just bought an 883 can I possibly have the cylinders and positions and heads from when y’all did the big bore kit?

[@dillanristow8750]

Pls do more of these type vids and plsss make a video of spite trying to figure out how to do valves

[@xpllmmff]

If valve adjusting is such a hassle to bear with, I don't know how Royal Enfield owners could get along with 5000 kms adjusting intervals, meaning they have to do all these stuffs every 3 - 6 months.

[@johnantonopoulous6381]

They can get longer/ the shims get fatter and make the tolerance tighter which means the valve or shims are longer/ fatter and there duration and lift get longer

[@mbtwmechanics]

Wonderful looking this two wheeler 👌👌👌👌👌👌👌

[@andrewmelalueca4881]

Hot exhaust gasses are far less viscous, therefore easier to push out of the combustion chamber.

[@233kosta]

Naw dude, exhaust gas is under a lot of pressure, even at BDC. That valve can be smaller to allow for a bigger inlet valve. Believe it or not, most of the cylinder empties itself. The exhaust stroke gets that last bit out and readies the piston for inlet. Good exhaust scavanving helps 😉

[@JayD..]

Just did my this weekend, i mean it is intense to do by yourself 😅 but with a little help its actually manageable 😉

[@alanhassall]

Is Ducati moving away from Desmodromic valve trains or are they only moving away for touring applications? The extended valve adjustment intervals are attractive, but unnecessary in racing where valve control is most important.

[@jessiequinton9974]

<a href="#" class="seekto" data-time="197">3:17</a> lmaooo how are you able to say that with a straight face and not giggle XD

[@TuLokotron2010]

Because it wasn't funny.

[@bve7397]

Luckily my old honda 650 has simple sohc, adjustable with screws simple as it gets tbh. Great to learn on, just did them this weekend second time but this time on a vtwin. The hardest part was getting to the engine 😁

[@ripntearslayer9101]

Lol this is almost funny. I'm getting an 82 suzuki gs850 running. For the valves, I gotta remove my gas tank then the valve cover. To get under my cams I just need a Cresent moon tool and I can scoop them out. I'm really starting to understand that a lot of the old ways were, in fact, better

[@micko1404]

Valve clearances aren't that hard. As long as you do the math correct, usually you can mix and match shims to minimise the amount of new shims required. Lots of fun doing valve clearances on an old Yamaha Genesis engine where you have 5 valves per cylinder.

[@neilius1015]

Great video and I hope you do more of these but…it’s not hard to see how electric bikes will interest a lot of folks once they become affordable…

[@icandsc]

I've been reading up on this all winter, in preparation of doing my first scheduled valve job on my 83 cb1000 (my uncle was the previous owner, and didn't ride it much at all - its only just now at the 10k mark, and showing signs of needing adjustment). the main thing holding me back from doing the job at this point is the availability of the shims, because I don't know what sizes I will need until I start the job, and once I know, I will have to order any shim sizes that I don't already have. But I want to know - because checking valve lash and changing shims could potentially drag out the job because of shipping time, why not just order brand spankin' new valves and solve all the problems in one fell swoop?

[@joej2353]

Because the valves go in below the cylinder head and require compression of the valve spring and, to do the job right, resurfacing of the valve seats. There’s a WHOLE lot more work involved than just checking clearance and changing shims. Not to mention the cost of a couple of shims vs new valves, springs, gaskets, tools….

[@benning7bass]

I think you should make an in depth video on the valve service of this ZX6 before you give it away.

[@nathanyt]

How often does this need to be done?

[@gormanspacemarine]

yeah so what about the zx6? under bucket shims? going to even take the fairing off?

[@garlandv3622]

If I get a 2015 300cc and the owner says it needs valve adjustment. Would that be a ok if it was a good deal?

[@62saki91]

just did this not long ago on my bike.. all where within spec, but close to spec range ends. and i don't have the little shims.

[@ommanomnom]

damn, i literally just paid £500 to have all my valves, tappits, and gaskets replaced. Should have watched this

[@chisomdavid5692]

that's the side I love most fixing my bike

[@maverickyoung9602]

PTSD from donut media “suck squeeze bang blow. Gas it up and off you go”