Skunk2 rear camber kit install - civic

[@richardguerra1712]

Seeing the joint made me subscibe bro

[@qualitytouch]

tru that....sub to mine to.

[@NV_Tensa]

Drug addict

[@LilSMOOVEera]

Just bought the same upper control arms for my integra and (1) came also flat, thank you for the tip man it was very helpful. I figured you just had to put a little elbow grease in it but didnt want to screw anything up ive waited a week for these things to arrive lol.

[@pyrotechnic4759]

Hey looking to buy the integra rear kit I’m wondering about how much negative degrees it can go max. I need about 10 degrees to make my tires not hit the fender and am not sure if these are all I need

[@hydro626]

Just a heads up: you had the arms oriented the wrong way when you first put them on and then fixed them without saying anything. You might wanna put an annotation that mentions this. Otherwise great instruction.

[@tkn24s]

Good video, i just lowered my EK hatch and same my rear wheels got hella camber. Imma order this and hopefully it works

[@outhere9622]

To get that hella flush look because we about that life 😂

[@dukebmxrider]

Hmmm, joint brought me to comment section.

[@theusedblink]

Thanks man. I'm gonna install one for some negative camber. I lowered my 96 civic coupe but the wheels wouldn't slant.

[@Nighthawkrsx]

Great video, thanks!

[@cognac8297]

The jack under the spindle is right . Should have removed the other jack. Then put a digital level on the trunk and jack the spendel until the car is level. Then adjust camber. I did it and mine are 0.. and if you don't level the rear of the car side to side with one wheel on. And if you just jack the car up to an unknown hight and set camber it won't be right when your done. Then put the digital level on the break rotor cause that's flat. And adjust..

[@TheLatinlover9574]

Thanks a lot

[@rc-nf3dy]

I know I'm coming in a little late, so I'm sure someone else already got but... bro, like, you totally coulda like counted the threads man 🥴

[@vanquishstorm]

Is it recommended to apply grease to the rubber bushings prior to installing these arms? Silicone grease etc.

[@g35tho11]

Did you ever find out ?

[@vanquishstorm]

@@g35tho11 I never was able to find out for certain so I applied a little bit of Honda silicone grease inside and around the bushing

[@g35tho11]

@@vanquishstorm makes sense . Just seen a skunk2 LCA bushing replacement and they recommend greasing the outside

[@Snafu2346]

would it be good to put anti seize on the components?

[@edersanchezconchasotelo9068]

Q buen troncho de Mari jejejeje

[@jpenadelaify]

My tires are leaning in on my 89 and eating my tires up. Will this shit fix mine. It's lowered on some speeding rods atm.

[@Euro.sosa.mane7]

How’s are the camber kits after 2 years ?

[@derekwilson8011]

I have a 97 Honda CRV tires are leaning inward wearing them out alignment shop could not do it will these help and do I also need to get the inner toe ones so they can adjust any which way they want any advice would be greatly appreciated thank you

[@BigPowerstrokeguy]

If your car is lowered these help getting it all aligned . I would recommend

[@derekwilson8011]

@@BigPowerstrokeguy no my car is stock height I'm thinking the trailing arm bushings I got her to stiff I don't know I've got toe arms coming and Camber arm so hopefully we'll see

[@derekwilson8011]

I have a 97 it's the car is stock height still having trouble with rear alignments wearing tires out I've got these brackets and I have the inner toe I'm going to install them hopefully they can align it

[@oneday3857]

Would that piece cause shaking?

[@AutoBodyEverything]

Also the rear driver side on my del sits way lower than the rear passenger side so the coils are all the way up on the driver side and all the way down on the passenger side and now the rear of the car is even. Is there a reason for this or was my delsol hit or something in the past?

[@IzzySk10]

Ever figure it out? My coupe has the same issue

[@lamydora457]

​@IzzySk10 hondas are like that from factory you dont really notice it with stock height but once you lower it if you set the coils all 4 same height the driver side front and rear will be lowere than left side even if the coils are same height thats why you have adjustable coils so you can adjustit to be even.

[@IzzySk10]

@@lamydora457 unfortunately I went with the truhart “basic” kit so I can only adjust dampening. Need to get a fully adjustable set

[@raeeqmohamed1607]

Does a camber kit reduce the chances of replacing tyres frequently

[@raeeqmohamed1607]

And does it reduce risk of play on cv joints

[@BigPowerstrokeguy]

Yes if your lowered

[@AngelPerez-ug3sl]

When I tried to take out the front 14 bolt the trail arm started to expand. Should I keep goin ?????

[@BigPowerstrokeguy]

Yes that’s normal . The tabs will space out just a touch

[@AngelPerez-ug3sl]

@@BigPowerstrokeguy thanks but turns out the bolt was seized in the bushing

[@andre4999]

LOVE to see the honda cool kids using harbor freight tools....ya cant missem. Why would you spend 5x+ for snap on, matco, blackhawk when they last....but get lost or stolen???

[@riduanyusuf6518]

Hisap rokok gulung tu hahaha

[@lilcoks]

Smoking one Green is atencion car enjoy

[@dudoydwex]

where can i buy this one sir?

[@throttlefilms]

so i didn't hand tight the inner 2 bolts, and now they are all stripped. someone help please

[@juanv4375]

Your fucked

[@drummerjstone]

Tap them.

[@drummerjstone]

Team Strip'em. Haha

[@4thgenlude397]

Those are not coilovers those are Amazon or eBay 50$ coil over sleeves just FYI nothing wrong with it we have all had them once before no need to fake the funk 😂

[@NV_Tensa]

True 😂😂😂 I was like, what kind of skunk2 are those lol

[@richardguerra1712]

I see alot of hondas with negative camber

[@johndreamer5707]

420 likes

[@kevovq3727]

420

[@VictorRodriguez-nq9xc]

No torque specs lol