SLAMMING My F100 For UNDER $100! Part 1: Disassembly

[@Thecraig909]

The amount of work that went into this project was crazy. I wanted as much detail within these videos as I could for those actually considering dropping their F Series which is why I split the videos up. The next video will be out soon! Stay tuned everyone! (WATCH THE LAST 30 SECONDS FOR A SNEAK PEAK!)

[@americanbullets488]

The bad thing was it was my mother's mustang....HER mustang he's lucky he didnt die.

[@americanbullets488]

🤔😂👍

[@Denver_Kline1995]

Thecraig909 whats up with the ecoboost emblem on the tailgate lol. did you get bored and just stick it on there or are you planing for a turbo setup?

[@engir63]

I stayed to the end and that looks really good

[@theplace8507]

I got a 1967 F-100 short box im building with my dad im 15 any suggestions im building a ford 390 Fe and It will have a Dana 60 with a posi in it and a automatic transmission I just need to get a cab corner re done because the driver side rusted out same with both doors it was a ranger package which I plan to keep most of on the truck any ideas.

[@snake-addiction]

Looks great, don't let the negative comments affect you. It's built for your pleasure not ours. You just give us the privilege of watching. ✌

[@Thecraig909]

Appreciate the kind words Adam!

[@aftershock2222]

That parking cable removal trick is handy, thanks.

[@angelg422]

Honestly to just know how far you’ve come from the beginning is just awesome to see AMAZING PROGRESS with the truck and I hope to see the rest coming soon...KEEP IT UP!!!

[@gabrielelquintero1475]

Better release part 2 already 😤 I’m done watching part one I need more

[@parkerjanelle7853]

I was sad Roadkill got taken off KZbin, but now I have this!

[@deatherageperformance8367]

Hey just give you a heads up you you need to buy a shorter set of shocks if you hit a bump you're going to get crazy bump steer and it will make the vehicle ride a lot better

[@leviwoodring6101]

Thank god its not to low.Looks pritty good. It's not dragging frame and ant on 22s so I like it

[@brandondannys-menary3678]

levi woodring agreed 100%

[@BluecollarOtaku]

12 point deep socket to remove brake cable.

[@HammerPowered]

Not sure what it is, but 2wd trucks look so good lowered. It'll look sharp man.

[@toastii3400]

can’t wait to see the finished product!

[@sethlincicum1342]

This is awesome, the truck is amazing!!! Great video dude!

[@wild_willy_from_twin_city4526]

If you flip the axle left to right, right to left forward will be reverse and reverse is forward.

[@wild_willy_from_twin_city4526]

@@classicstangbrn8964 think about it,....

[@jarrettphelan1470]

The same way i lowered my 1990 f150 a grinder, a stick welder, and some old well pipe casing for the notch been running it for almost 2 years that way and its still strong. Cant wait to see yours after you get that vic swap done!

[@rxbu4149]

Looks awesome! Might have to do this to my f-100.

[@openhighwayproductions]

Cool. I would drop the front just a wee bit more IMHO.

[@Petrol360]

Man can’t wait to see it all going back together in time to make the show! Nice trick with the brake cables I will definitely be using that next time! Also tag looks right at home on there!

[@mattdrendel3127]

That looks so sick. It looks better than I even imagined it would.

[@huntsman5226]

That trick with the break cable was a great idea thanks for the great video

[@roaenokesyzlak7828]

I love your Roadkill approach "We have somewhere to be on saturday, its Wednsday, and we're tearing the suspension out"

[@andrewcunningham8121]

What size cooper tires you run. Those are bad ass. Love the steelies!!!!!

[@malibubarbiie1111]

Cut 1.5 coils out of my 69 camper special and pulled a couple leafs in the rear, sat raked and drove great still. Prob could have used shorter shocks like mentioned before

[@UNITEDBYTRUCKS]

Great move! We love a good slammed classic truck over on our channel.

[@scottlavine1530]

sweet trick to getting the e brake cables out. truck looks amazing

[@jamieround2072]

am wondering if u consider changing the rear or all 4 to disc brake's........????

[@ClassicRideSociety]

I like them stock height but dropped looks good too

[@apocalypse92ia]

That giddiness he gets at 4:47 brings a smile to my face

[@Thecraig909]

It was an incredible moment

[@eshaneowens]

Just found this video because im beginning work on my 67 F100. Then I heard you mention Bartle Skeets, and then I saw you have the exact same ford racing tag on the front as I do. Its fucking destiny. Subbed. Looking forward to watching many more videos.

I was thinking if you can make a disc brake conversion on your truck.

[@pmr413]

Great tip using the fuel line clamp on the E brake cable.

[@DJf-vh6hp]

I did the JDM drop I beams and lowering shackle and front leaf spring perch while I was at it I also swapped out to 76 disc brakes in the front Direct bolt-on love your videos keep up the good work

[@DJf-vh6hp]

DJM not JDM

[@omar_padilla]

Thank you for that spoiler!!!! I was dying to see how it came out, and man that shit looks hard my boy you guys did a good job.

[@luketeverino6085]

Looks awesome man! Good luck with finals soon

[@mmatma31]

Looking good what size was the nut for the front sprint at the bottom

[@mmatma31]

Spring

[@ronaldroybal6091]

That looks freaking awesome Craig!!!!

[@andrewcampbell753]

That looks way better!!👍🏼👍🏼

[@flatbroke_9246]

Finally the way it should be bro It looks nice 👍 i did the same to my spring and the back just took off one leafspring

[@frederickgilmore6329]

While you're at it, why not put on a disc brake conversion on the front?

[@shartne]

What happened to the Crown Vic frame?? Thought you was going to make this truck awesome with a Crown Vic frame.

[@gutierrez2426]

I like the eco-boost decal 👍

[@jamesmcclain5441]

I have a 69 f100 and want to do this to it, did you bend the beams? And if I just place the leaf springs under the rear end only and not do C notch cutting how much coil should I cut off the front?

[@rodgracia5797]

That looks awesome, does anyone know of a shop or some one that can do the lowering on my 74 f100

[@stephenparker8460]

Congratulations you’ve caught the lowered truck bug, things will only go down from here😁

[@rogerhill5054]

It looks awesome lowered good job.

[@paulaleshire4926]

I'd love to know what the ride height was before you lowered it, and hopefully the ride height after? You really got me geared up to do the same to my 69 short box!

[@JT-bl2so]

wish we had video cameras when i was young doing this..

[@4ndy530]

You'll need a matching duel cab long bed to tow that rig!😂👌

[@Thecraig909]

Check my latest video hahahaha

[@connorlovejoy2951]

Looks friggin sick man. I love it.

[@jadenrhines234]

I did this to the front of my f100. It still drives really nice!

[@brucedrake904]

EcoBoost on the tailgate priceless lol

[@coleslaw110]

Now it's really lookin like a hot rod. Looks friggin sweet

[@slammedpassion9157]

This is what we have been waiting for 💯

[@japple6779]

im redoing my engine bay and motor right now but this may have to be next!

[@sweettee3647]

I had to have my drive shaft cut after flipping the axel. You might have to do that.

[@Viktorrhansen]

Now you just need some wide johnnys to fill out those fenders!

[@bigfootgarage2201]

I thought youwere doing the crown vic front end?

[@malcolmadams2162]

Jacob Shelton I did too

[@ThatGuyWithTheFords]

That Eco Boost emblem got me 😂

[@eanhartman9574]

Very impressed by this video dude. Keep it up!

[@bss3030]

I have a 1972 Gran Torino sport! I’d also love to have that galaxy!!!!

[@1manshop335]

Dropping my 68 GMC this summer great video and man that looks soooo good

[@alexthompson4853]

That’s funny my 1970 f100 set about like at 5:30 (profile picture)

[@fbs1926]

O man this job looks like some intensive work but the pay off looks sooo good it’s worth it👌 dam she’s sitting low and slow now lol.

[@jakobwisser7074]

that thing looks badass

[@americanbullets488]

Yes love it craig!

[@americanbullets488]

I loved it how it was though. Dadgum

[@classicstangbrn8964]

Hey Craig did you make it the Fabulous Fords?

[@CrewCabKaleb]

you should make the wheels fit flush

[@americanbullets488]

Awsome vid bro!

[@nelsonramos2218]

awesome bro 👍

[@dallasdelano8235]

Looks good!

[@poppy6788]

What size wheels and tyres are you running?

[@skinmachine9718]

Aye KZbin recommendations working decent today

[@americanbullets488]

Stepdad just backed in to my truck.....its the one on my profile picture.

[@physcobillycadillac228]

Awe man dude. I cant believe you did that. The truck was awesome before it was dropped

[@corygentry2850]

Power wagon and ram charger were r they that

[@kml2057]

Would this same technique work for a dodge d100???

[@themodernadventurer4320]

Klarence P42013 I would assume anything with a frame lol

[@flyguy8362]

Now you need new ball joints and a front end alignment.

[@merritts3515]

If she didn't ride like a buck board before. It will now 😂😂 my friend did this and oh ma goodness you felt the road lmao. But our backs are young so 🤷‍♂️

[@mcdlt8414]

Fucking awesome my dude, love it, can't wait for the other parts

[@classicstangbrn8964]

I thought you were going to Crown Vic front end.

[@dantheman9395]

Looks AWESOME

[@larryhoffman5066]

Looks great

[@SuperGentry12]

Do you think this would work on a 1977?

[@bradgotch]

I’m in 7k so far for my 60 f100 ifs front 4 link rear coil overs. Under $100 sounds good.

[@jimbirmingham6287]

Looks good

[@jacksonschubert2063]

dang poor f100 guys with i beam front suspension and leaf spring rear on my c10 its double wishbone front and coil rear so you just cut all of them or get a cheap lowering spring for all 4 corners

[@NikolitheRussian]

My f100 is about as tall as yours but it's a longbed so it doesn't look too bad. I also may end up doing a 4x4 conversion at some point so I'm going to leave it. That being said, I'd love to get a slammed shortbed just like yours. Mine's a 78 as well so it's a bit uglier than your truck

[@yermoffroad]

If you literally flip the axle all your drive gears would be reversed and reverse would be forward

[@jodiewhitehead3750]

Where is the crown Vic frame

[@robertmarcial4810]

Welcome to the pain of slamming brother!

[@brandondannys-menary3678]

Love the eco boost sticker lmao

[@AnthonySvt_]

I thought you where doing a frame swap

[@mattb2179]

Ugh drop tease! I'd have watched the whole video.

[@americanbullets488]

We just got done fixing my bed on her 20 min ago man!

[@mr.dankman5892]

But but I like movies Craig lol the truck is going to look fucking awesome

[@bradbusch9585]

Sweet

[@mattduncan2821]

So whoever told you to completely flip the rear end was messing with you. The truck would drive in reverse. Love the build. Your channel(and this truck) have caused me to search Craigslist pretty much non stop. Lowering it was life changing. Looks amazing

[@areess6209]

Flipping the axle means putting the axle on top of the springs instead of under the springs....

[@mattduncan2821]

@@areess6209 in the video he talks about not just putting the axle above the spring but also flipping it upside down so that the locating pin would fit in the perch on the axle tube, this would cause the vehicle to go reverse when in drive.

[@areess6209]

Seriously???? Yeah that wouldn't work. I'm digging around trying to find out how to lower the front of a 67 f100.

[@jaypfeif3104]

Good video as always

[@clementdude6266]

5:58 eco boost

[@allanperry6507]

Dropping a little is good, down on the ground for a truck is fugly. But just my opinion