Sleeper Civic is FULLY ASSEMBLED & RUNNING... Barely😂

[@Kathisbuecherstapel]

Hey Robbie, the "extra" piece of interior is on the tailgate, this is the piece you are looking at when its open, right at the spoiler from the inside.

[@mnardz16]

She's 100% right^

[@bicboysam2347]

was about to comment this lol

[@KasamS]

Was thinking it looms like its from the boot i know nothing about honda interiors but have stripped many cars

[@altec7100]

Exactly what I tought!

[@shinigamizzz5372]

@@KasamS i've never stripped a car but i imagined it belonged in that area too

[@bengreengrass3107]

I found Robbie halfway through the Brz series and I'm glad I stuck around.

[@quintinhill8491]

I got here a little bit after the body kit was put on

[@clutchkicker-k8c]

I found him when he made a vid that he ordered a Karma bodykit

[@SeruiX]

I was looking to buy a civic when he got Jasmine, that's how I found him

[@teuksu5183]

found robbie when he bought jasmin

[@kainine09]

I found him when he bought Jasmine... saved me from suicide

[@KoendHaan]

That chattering sound your clutch makes is your twindisk. It is the middle disk that's floating when you press the pedal. It's supposed to do that :). Some sound worse then others but all twindisk clutches rattle!

[@bulbacivic]

When he said "a seat won't help I need lunch!" I felt that. I truly did

[@Vinny_85]

The 8 y/o trying to drive in the garage got me good xD

[@vtijim]

Robbie the spare piece is the top half of the tailgate. It covers the spoiler bolts

[@StefiStefi007]

Anyone notice how when he hit the car to show everything is fastened , it sounded like Phill Collins In the Air Tonight 🤔

[@owngamesgamer4030]

7:25 "i can feel it coming in the air tonight"

[@On_3]

Lol i was trying to find this comment

[@carternevill]

Lol, definitely hear it now🤣

[@Kingtim1995]

Props bro i was totaly going to call it !😂

[@OwenBuckingham11]

Was thinking the same thing!

[@SuperBailey]

That sound when you put the clutch in its the clutch pieces rattling, not the throw out bearing. Welcome to multi-plate clutch life

[@siennaslaugh8900]

what about if it rattle when you disengage the clutch? would that be the throwout bearing?

[@SuperBailey]

@@siennaslaugh8900 well that's just it, that rattle sound could be the throw out bearing, but it is likely because it's a dual clutch and the clutches will only do that when the clutch pedal is "in" or disengaged. Take a google at "twin disc clutch sound" or even kzbin.info/www/bejne/eZeboot8fbire6M

[@siennaslaugh8900]

@@SuperBailey sorry I may have worded that incorrectly I mean when the clutch is out because my car does it if the clutch is in it's fine but when I let off I can hear a rattle and I assumed it was my throwout I just wasn't sure

[@SuperBailey]

@@siennaslaugh8900 no that's likely a clutch or transmission issue, because when your foot isn't on the clutch pedal the throw out bearing shouldn't be touching the pressure plate

[@siennaslaugh8900]

@@SuperBailey Idk I felt like if the bearing isnt making contact it wouldnt be set so if it blown or something it might rattle but lm no expert

[@ic4tp]

That trim goes on the boot along the top of the window .. keep upnthe great work mate .. sending love from australia

[@running.yetiii]

Hey Robbie, Love the progress on the nuggety Civic. When it comes to 10:57, I simply moved the head unit to the bottom and installed a plate that can hold 3 gages at the top. 10 minute install and no trimming needed cuz both slots are 1 DIN. Glad if I could help. Stay safe. :)

[@premium2.0t5]

2:53 look like a little guy driving is first manual car😂

[@_nuclearism3433]

he do be lookin` like slammed civic owners here haha

[@koeseman1]

In my ek, the gauges are up top where the radio originally sits. I moved that down to the spot just above the cupholder. Maybe an idea if you want the gauges up top!

[@mihailpetrovici5044]

you can move the radio down there, you get the console out, that piece of plastic gets out with screws and it's pretty much the perfect size left in that frame for a radio. And in the radio place you can put 3 gauges

[@d3mara]

I just binged this entire playlist. New sub here for sure!

[@grimacethewrx]

The chattering is just a thing that twin disk clutches do. Also sounds like you have a miss fire one one or two cylinders still. Could be tune related but just do another once over and make sure spark and injectors are firing on all cylinders before you run it to much more. Good job man keep it up!!!!

[@sachinsukhu1186]

This build is so sick and appreciable 🔥

[@brandonfox0619]

Glad to see you grinding bro! Keep at it!

[@jacobarendt3727]

I love the interior of this thing, idk why but the clean and simple looks is nice

[@tokegamingbdctokegamingbdc7339]

“It’s finaly tuning under its own power I’m never pushing it again” 1 minute later. “So I had to push it in”

[@danbrown4110]

Yo can you call Brad and tell him to upload some stuff on his S Chas?!?

[@dismanchedismecanique7423]

Hi Robbie ! Love your work here from France ! I have also an ek civic and the last piece at the end of the video is supposed to go in the interior just behind the rear wing !

[@rayaadomar436]

I love it whenever Robbie posts always 🔥🔥🔥

[@dennisroberts2186]

Shattered my ankle on the weekend, so robbie, you better start putting out more videos for me to watch 🤣 but seriously though I only watch you and Rob Dahm.. so let's gooooooo haha

[@francoisgagne5159]

hey Robbie, if you're looking for a multifunction gauge, Perfect Tuning makes the best one!

[@Xagovi13]

Oh yeah. Been waiting for this all winter

[@manson12ify]

The clutch is a twin disk that’s a good sound when you engage the clutch

[@latenightkauai]

@Robbie Ferreira are you ever gonna do a mild stance build? Like a little stretch tire and camber or is it not your cup of tea if it is, I definitely wanna see how you take it on been sticking here for soooo long

[@shifthaven2024]

Did a bit of looking and it turns out the clutch is meant to make that noise because of something called the floater plate which is in between the clutch and flywheel love your channel keep doing what you doing #staycommitted

[@jordanpennucci6382]

The best example of the phrase “Stay Committed”💪🏽💪🏽💪🏽

[@dat_bouy]

s2k steering wheel would be cleeeaaaaaan

[@ryanmorse4507]

Doesnt that extra piece go at the very back of the headliner?

[@kadenmyers61]

Been here since 20k....best choice of my life to stick around

[@RenewedLifeMedia]

Lol toddler Robbie trying to drive the civic was my life most days. Amazing

[@noelopez8206]

Yoo clean build... cant wait to see it runnn

[@kainine09]

That piece (I think, used to own a corsa lite, very similar shape) is a trim around the door. Like if I remember correctly it's the piece between the window and the door

[@FRKahs]

On the brz to eliminate the gauges you should do a digital dash. There are some really nice but not super expensive ones.

[@erikherrero8603]

You think I could use hockey tape on a wiring harness on my sti that sits underneath the intake manifold? Or is that too much heat? Idk

[@Smartie117]

Robbie, does the clutch have more than one plate? If so that's just what they sound like. I do tractor pulling and all of our tractors that have twin plate clutches sound exactly like that when you have the pedal pressed...

[@youblank2412]

Honestly my favorite build so clean

[@SCVRLETT]

Can't wait to build something like this, honda's are so much fun man

[@ALYangRSX]

Love that song at 11:50 gives me Brent vibes hahaha I think it’s perfect for this video too because Honda😂 By the way, clutch sounds like you may need a clutch stop. When running a twin disc, especially with these k series, if the pedal engagement is too high, it will over extend and rub on something in the rotating assembly, can’t think of it on the top of my head. I’d give that a try first.

[@elijahpajarillo2395]

8:00 literally acurate af...both of my hondas have exactly that type of steering wheel hahahahha

[@printstanza7792]

Love you man ❤️ Great progress 🔥

[@taahirlarney1642]

Please be *COMMITTED* and post more updates on the Honda K series build please.🥺 She's looking SWEET💯💥

[@PrimeVG]

You should totally stream days like this on twitch

[@Tylonzo]

Yessir civic content👍😁

[@FaTBoYEtHaN]

yoooooooo mine clutch does the same thing in my hatch. If I press the clutch all the way to the floor it grinds and wont go into gear. I just dont press it all the way. brand new clutch, flywheel, pilot bearing and throw out. Mines a B series tho but the clutch has no problems the last 5k miles.

[@dubssalamander]

YEA BOIII SHE RUNNING

[@edwintowers3609]

Paint the intercooler front pipe bumper so that you cant see it from the front, helps with the stealth look

[@matthewbrayton8166]

Last piece looks like either the bottom door sil, or the top of the rear hatch trim. Above the glass on the inside.

[@topnerdgaming7182]

Hey Robbie I love the videos man. I just bought my first car which is a 1998 Ek it has a B16y nothing special but I plan on building her up

[@mikeeyyss2150]

2:48 Robbie looks like a little Timothy driving for the first time lmao

[@kamschnick7067]

I had a big turbo VW Passat, and i had one of the multi gauges in it, and it is 100% worth it! I think i had a p3? It was called.

[@rivrflow]

“wow what a piece of shit. AND I LIKE IT!” 😂

[@punkrockmaniac21]

Robbie did you fix the rod on the slave cylinder yet? Also the rattle noise you hear when the clutch is depressed is the twin disk. It’s normal

[@tdoucette8281]

Sleeper look is fire! 🔥

[@figbat6363]

You mean stock? Lol

[@ProductionsofTCAS]

Robbie, this was epic! God bless

[@Fat2Fit5k]

I'm back have to watch now after work

[@hox2596]

I think that interior piece is the trim that hides the rear spoiler bolts

[@Luv_.perez09]

NO WAY I'VE BEEN WAITING FOR THIS VID😌

[@AndrewOgilvie1]

I noticed the door has a few dings, just an idea carbon doors and paint them to keep the sleeper look.

[@tomkatt1812]

That noise you're hearing is you're over extending the clutch peddle which is over pressurizing the the throw-out bearing. You probably don't have the clutch stop that's supposed to be in the firewall. If you don't have that and keep over pressurizing the throw-out bearing it will explode. Ask me how I know 🙃

[@OwenBuckingham11]

7:24 sick drum beat bro 😂

[@LoL-tc4cm]

the only thing that didn't work for Robbie but everyone was so happy that it didn't work was him trying to sell Jasmine

[@supedupcoupe6690]

If he tries again he should only be able to sell it to one of us.

[@LoL-tc4cm]

@@supedupcoupe6690 well he better fucking not

[@Rieku_]

Ayyy finally a new video, been waiting for this #committedcrew ♥️

[@thebmxlife6381]

Getting those pipes powder coated black would look amazing

[@jaylinhofsta9410]

This man is such a vibe tho :)

[@bryanedward6021]

Sick build

[@quintinhill8491]

You should get bucket seat for the driver side. Slight hint but doesn’t give them enough confidence bc of the stock passenger seat

[@Ben-rm9jx]

12:52 check your pilot bearing.mine went out and caused that sound on my old car.

[@falloutsurvivor7]

That piece at the end looks like it came from by the hatch maybe? Like at the back of the trunk

[@italicbass2426]

2:26 when your lawnmower won’t start

[@Drake_Dawley]

are you thinking of doing an undertray? such a nice engine bay but itll prob get quite dirty.

[@Oskar-xk6lh]

hey. just wondering witsh year moddel the sivic is? absolutly live the car bor

[@stw_riotzz9222]

Robbie literally looks like a child when he sits in the civic😂

[@tdoucette8281]

The civic looks so fire without the front bumper! 🔥👌

[@randomvideoman1234]

The best part is my committed crew 3d hoodie showed up just as I hit play on the video

[@zaclassale3484]

Robbie, i think the awful clutch noise is just the characteristics of a twin disc clutch. some vary in noise but as far as i know thats what the noise is and is completely normal. you will probably just need to get used to the noise.

[@Zadow]

that extra part looks like it could be trip for a door or maybe in the boot?

[@paulray2577]

Lets goo! Makes me wanna get the k24 i have into my 96 hatchback!

[@DragSlicks]

I can’t wait for the Nissan 300zx content!!!!

[@declanheslip3781]

Great vid

[@deanamique2371]

What about the restock of the wind breaker ?

[@grantrichards7051]

Does that trim piece maybe go on the inside of the hatch?

[@Otsp922]

How does the hockey tape loom hold up to the engine heat?

[@Jamal_sml]

i just love ur content

[@sebastiansmolnik1926]

dude it sounds like a lawn mower XDDD

[@BrokenV50]

I love your vids!

[@daveg7501]

To fully reassemble the car and only have one panel leftover is amazing LMAO

[@Fahrenheit_Motorsports]

I thought I was watching a Dustin Williams video with the music and edits. 😂

[@kas731]

it should sit on the tailgate above the rear window and cover the screws for the wing

[@BossTweed69]

Baaahhhhhh

[@neonboy26]

Dude, can’t wait to come to canada and meet you!

[@BigB848484]

As a honda owner myself, I actually think the stock steering wheels are pretty cool :D Okay maybe not with that stupid Honda cover, but I always thought it's a cool looking wheel.

[@jaimesoto6742]

Let's go!!!!

[@erikw731]

Seen you because of the wish civic been here since

[@willyalaniz9275]

These videos remind me when you built jasmin in your garage. When she wouldn’t start either 😭

[@jetcops21_98]

Check your drive shafts, 1 might be in and 1 might be out, happened with mine

[@heavenlyhatch6219]

That extra plastic is for the rear hatch where the wing bolts to