SLOAN FLUSHOMETER 111 VALVES INSTALLED

[@J-Colt]

Just rebuilt all my shutoff valves at work. Most rubber stops and back out springs bad and dang things didn't want to shut down all the way. Busting some of those open without snapping pipe was fun. Thanks for video Chuck!

[@ChuckBarron]

yes sire J. I got lucky on all except 3 threads and they were all exposed.

[@mdovideo1414]

Could that 1 Inch copper pipe break off inside the wall if you over tightened it

[@ChuckBarron]

no doubt. any pipe you crank can cause damage. good eye plumber.

[@shaikkareematshaikh2370]

What model you use flush valve

[@ChuckBarron]

the 182 I think.

[@armandomadrigal9793]

nice job Cb, had to bust out mapp gas, and solder, some times you have to. thanks for video

[@ChuckBarron]

Thanks Armando. gotta do it.

[@colingomez8949]

New torch??

[@ChuckBarron]

Yes....a month or two old.

[@alibuolayyan9038]

I think the piece is jammed behind the tiles

[@ChuckBarron]

Man, This one was a job for sure.

[@TerryDowell]

What’s the brand of pipe wrench you used .

[@slick703]

That was a Ridgid Spud wrench, smooth jaws for brass and chrome surfaces.

[@ltsgarage7780]

Buy a 12 inch crescent wrench. They are easier and faster. But if you must throw your money away "Rigid" makes them all.

[@ChuckBarron]

Yes sir....nice ridgid spud wrench....worked real nice.

[@ChuckBarron]

Of course Lee...but of course.

[@ChuckBarron]

Yes sir slick...good eye plumber.

[@andrewfletcher2213]

Weird that it was roughed in to what looks like 1 1/4” for urinals then bushed down. Cool vid! 😎

[@ChuckBarron]

a long story but we got it to work...

[@anthonys.5653]

The Plumbing God's got me yesterday at 2pm (Friday) as I went down to fill our water softener with salt, the water heater decided it was a good time to start leaking every where. I hate when that happens on Friday's.

[@ChuckBarron]

dreaded friday late job....calls for a monday holiday.

[@Vaticider69]

Should of asked you to hit Tilton fitness while you were there....have an overnight job coming up there soon..

[@ChuckBarron]

oh snap....so close plumber. lets do dunkin dunuts on me dawg..ha

[@zakkmon123]

What about brazing some 6” copper? Don’t forget to wipe your solder joints..... 🤙🏻✌🏻

[@ChuckBarron]

they got wiped. Love me some brazing for sure.

[@asiagreen5658]

Your sons will learn how to soldering in the plumbing school.

[@ltsgarage7780]

I'll bet they don't go to a plumbers school. CB is going to teach them all they'll ever need to know. Of course CB doesn't know everything. He's not that good with a torch. Which in plumbing is one of the first things you should learn.... He should send his sons off to a good plumbing trade school. When they get back. They'll both ask him on a job like this. "Dad. What the fuck are you doing ?" 😋

[@ChuckBarron]

Oh lee is back on one of his roles.....and Lee baby please no fbombs. Can any one step in for me here please. Im hitting the hay early here on the east coast.

[@ChuckBarron]

Thanks Asia. No doubt.

[@J-Colt]

@@ChuckBarron I looked for Lee's soldering vids, didn't find any. Maybe on your slow days bring out the torch and put pro press away so you get more practice. Nothing worse than having to do a lot of soldering and you haven't done it in awhile. The criticism kills me. My main job is maintenance at police/jail. I own a computer business. I get hassled periodically because I don't do networking every day and I sometimes have to struggle to get certain set ups correctly. I get it though! The ones who say something are guys who do nothing but networking. Wouldn't know how to retrieve data off a bad drive or solder a chip on a board though.

[@ChuckBarron]

lee is bitter but i embrace his lee isms. he makes me laugh for sure.

[@JamesBrown-db9pk]

old chucker wen u gonna teach the kids the trade hell send them up here in 4yrs ill have them on there own

[@ChuckBarron]

ya they missing all this live action for sure.

[@dannywilkins887]

If it was easy they would be all doing it!

[@ChuckBarron]

yes indeed. ask lee. he the best. lol

[@m.3bd]

Plumb on

[@ChuckBarron]

Yes Sir....Day of rest today with 24 hrs of fighting fires.

[@dannykeane6565]

TAPE THE HELL OUT OF IT

[@ChuckBarron]

pass the tape please.

[@jeffcoolhd]

CB-1 I love sweating me some pipe on Friday at 4:30 p.m. lol. Peace brother

[@ChuckBarron]

Better not have a leaker......lol

[@ltsgarage7780]

Chuck.. CB. I just watched a video by Steve Levamoniere. (Spelling) it's how to replace a cast iron flange. You should go watch it. You and your faithful followers would really learn something about being a plumber over being a Handyman. Lessons learned.

[@timhendley1950]

Lee Olaeta this guy again?! Still no vids from the plumb god himself....

[@ChuckBarron]

Thanks for the great tip Lee...i think your 2-129....2 tips to 129 criticisms. I love it. 👍😜

[@ChuckBarron]

bitter lee have a tip and called me a handyman....lol

[@patrickmurphy9632]

Gonna talk shit on someone while miss spelling Lavimoniere even though you could of looked his name up and spelled correctly but now you just look ridiculous

[@ltsgarage7780]

@@patrickmurphy9632 ummmm. Petrick. Did ja notice I put spellen in parentheses? 😋 Come on. You can do better than that.

[@TermoSolutions]

Nice job barron..about lee olaeta? What to say, he have tutorials knowledge. I bet he never touched coper..

[@ChuckBarron]

he should blog..greatest internet plumber out there for sure.

[@sekseemarcuskidd]

Lee Olaeta is the Sherlock Holmes of soldering he even can forsee whats happening to the whole joint and nothing but the joint. If you dont do the Lee Olaeta way of solder to hell with you sir. Come on... why dont you leave these plumbers alone and let them plumb on!

[@TermoSolutions]

Lee olaeta can fly..lee olaeta can jump 5 meters... lee olaeta can make earthquake with his punch..hahaha im sorry chuck i needed to reply to this

[@JamesBrown-db9pk]

remember cb u not u tube god unless u have 5ok in subs

[@ChuckBarron]

its coming james. stay tuned. ha.

[@dannykeane6565]

Lee .... Roughing the Plumber 15 yards get your own license make your own vids .

[@ChuckBarron]

T him up!! Lee do know what that even means?? lol....Im sure you do!

[@Vaticider69]

I get off work..... to watch you work, how stupid is that..... picked up that caulk remover tool today thx...

[@ChuckBarron]

they work nice .....lol....i work and do the same. ha

[@JamesBrown-db9pk]

ole bunny y use use can torch get in the real world turbo not map gas i think the god wood laf at u

[@ChuckBarron]

I am Plumb God....I still laugh at myself. mapp all day for me.

[@ltsgarage7780]

Really? You can run a propress machine but you don't know how to solder? How long have you been a plumber? I must ask. Why do you wipe more flux on the fitting after its started to cool down? As far as the chrome esq. Left on the pipe that you had such a hard time removing. The tile guys figured the plumber that was coming in next knew what they were doing. Next time.Take a chisel and split it right down one side. They come right off. They come off much faster than the way you did it. (Time is money) You're progressing in your plumbing field by buying a no tooth flat jaw pipe wrench? Don't you own a 12 inch crescent wrench? They work much better & are easier to operate because the handle is longer. I haven't pulled my flat jaw out of its drawer in 20 years. But I have one. (I don't know why) Nice job CB for a beginner. Watch a video on soldering. You should move your torch around more when heating up your fittings. By leaving your torch on just the left side like you did at first. You cook your flux out. Which creates a spot that your solder will not flow properly. I know. You saw a good solder joint at the edges. But you haven't a clue what the center of the joint looks like after so much heat in one spot. I'm just amazed the more I watch CB

[@ChuckBarron]

Lee your a wealth of knowledge and compliments I don't know where to begin. I may and I am gonna sleep on this one. lol

[@ChuckBarron]

oh General Lee, Please make a video of soldering....or Lets do a collab together....pretty please. It will be fun for sure.....West is best right?

[@ltsgarage7780]

@@ChuckBarron cb. I asked a simple question about why you wipe your fittings with flux after they are cooling? The part about heating just one side hot enough to melt solder before moving your heat. Is like beginners school. You should know better. But I see you pass right over this. It's ok Chuck just ignore the parts you can't explain. Or just don't know. As far as me making videos. People would still watch yours an believe you know what you are doing. That's the crime. My videos wouldn't replace yours.

[@ChuckBarron]

your the best bitter lee....i have always wiped to clean a drip of solder. habit and its been working for 34 years now. thats why. Im sure you will have issue with that.. find us a link of the best way to solder so we all can learn. thanks lee.

[@ltsgarage7780]

@@ChuckBarron you told me 25 years?? Try a plumbing school. Not some u-tube school. Never put flux back onto a hot pipe or fitting. In a trade you should know all the skills. Not just use one because you can't master the other. You're the one that called yourself a "Master" plumber.