No video

Small dimmer usability improvement

  Рет қаралды 210

Mazda 626 GF

Mazda 626 GF

Күн бұрын

Пікірлер: 7
@liorlevi3991
@liorlevi3991 2 жыл бұрын
Short and to the point. Well done
@Mazda626GF
@Mazda626GF 2 жыл бұрын
As always, thanks!
@TheAntiyellow
@TheAntiyellow 2 жыл бұрын
Hello bro... I am in a little trouble because I have a mazda Protegé South América versión: is called "Allegro" and the problem is that my car doesn't come with this dimmer... I have the dimmer (buy it in ebay) but I dont know how to connect it, I cant find a plug in the holes where this buttons comes... so I was looking your videos, my car has the same clúster, the same buttons and almost the same dashboard I think that if you guide me where the electrical signals of the dimmer are I can connect it and hope the backlight will increase or decrease as is supposed to do. Thanks for your answer... if you have a Facebook account please post the link...
@Mazda626GF
@Mazda626GF 2 жыл бұрын
Hello. Unfortunately, the dimmer is quite complex piece of hardware. If your car did not come with an adjustable backlight, this means the backlight is connected directly to the TNS relay. So step 1 is to find where that connection happens and disconnect it! Otherwise, you will be trying to dim the parking lights as well, which the dimmer cannot handle (too much current). Only that part is enough to make the task almost impossible to do. Then the dimmer wizardry comes into play - you'll need an oscilloscope to understand how it works and then figure out how to connect it. Also, it has some odd logic to change brightness of the clock/head unit, but I never understood why (I no longer have both clock and head unit). So, long story short - forget about it. It can be achieved, but you'll need to remove the dashboard, trace cables and figure out how to connect the dimmer. Too much work for too little gain.
@TheAntiyellow
@TheAntiyellow 2 жыл бұрын
@@Mazda626GF thanks for your answer bro... i'll be testing the dashboard with my dimmer 👍🏼
@TheAntiyellow
@TheAntiyellow 2 жыл бұрын
However I'll be thankfull if you tell me where the wires or your dimmer are connected... but if you cant I understand bro... thank you again
@Mazda626GF
@Mazda626GF 2 жыл бұрын
@@TheAntiyellow On page 472 you can find the pinout and where each wire connects to: www.mazdabg.com/ftp-uploads/Mazda/626/1997%20Mazda%20626%20workshop%20manual.pdf
Blind Spot Detection system for Mazda 626 GF
26:53
Mazda 626 GF
Рет қаралды 598
NEVER install these programs on your PC... EVER!!!
19:26
JayzTwoCents
Рет қаралды 3,2 МЛН
Чёрная ДЫРА 🕳️ | WICSUR #shorts
00:49
Бискас
Рет қаралды 6 МЛН
WILL IT BURST?
00:31
Natan por Aí
Рет қаралды 20 МЛН
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 40 МЛН
Dave Allen - religious jokes
13:20
DutchPastaGuy
Рет қаралды 6 МЛН
Turns out REST APIs weren't the answer (and that's OK!)
10:38
Dylan Beattie
Рет қаралды 149 М.
Customer States 'My Boyfriend Fixed My Brakes!!!'
12:35
Mechanical Nightmare
Рет қаралды 44 М.
Will Scammers Notice I'm Using Windows 95?
15:01
Kitboga
Рет қаралды 5 МЛН
EA Won't Let Me Play This Game - So I Hacked It
8:49
Nathan Baggs
Рет қаралды 310 М.
If __name__ == "__main__" for Python Developers
8:47
Python Simplified
Рет қаралды 397 М.
TPMS for Mazda 626 GF and Mazda 2 DE
19:31
Mazda 626 GF
Рет қаралды 349
I was sent this mClassic with NO VIDEO Output | Can I FIX it?
20:52
StezStix Fix?
Рет қаралды 92 М.
Electromagnetic Parking Sensor in the Mazda 626 GF
20:40
Mazda 626 GF
Рет қаралды 1,8 М.