Smart Hayabusa, part 5.3: main shaft fab, reverse testing and engine installation!!!!!!!

Ho yeah!!! I'm getting closer and closer to get that go-kart running! This is the installation of the hayabusa engine in the subframe, the fabrication of the main shaft and the testing of the reverse! I can almost smell the burning rubber!
My reverse ''starter motor:
amzn.to/39XixrV

[@aravindrnair8866]

Amazing work sir and great content. You can use a differential spider gear casing(with spider gears) weld their windows shut, pack them with grease, remove the crown gear and swap it with a same PCD sprocket to get open differential character.. It's a bit complicated assembly but the plus side is you get two CV shafts that go along with it, saving tonnes of money and time on the whole process. You can also use the bearings in the casing and create a custom mount for mounting the differential to your chassis.. Just an idea we use in Formula Student

[@glazecase]

Another amazing and entertaining video! It's nice to know even the pro miss things, like the pressing the shaft too far and the misaligned bracket. I feel better with the mistakes I've been making on my own project and able to move past it and keep pushing forward. Thank you so much for taking the time to make these videos. I can't wait to see your next one. I hope you have a good weekend!

[@VinyB57]

You are so right...I make a lot of mistakes....because I do a lot of new things, and it absolutely normal! I'll try to remind to put some of those in my videos, so we can all learn from it, but I'll put the less embarrasing one 😉

[@stevenpelayo9418]

Such an awesome build. You should have at least 100x the number of subscribers you currently have...

[@VinyB57]

I'm working for that goal....one day the algoright will pick me up!...but thanks Steven! Stay tune buddy and you can share it if you want it! 👍

[@gsftom]

Great video again. Just binge watching your build series. Funny as all get out and super cool build!

[@jasonbergeron781]

J'ai vraiment hâte au prochain vidéo! Main shaft....😂😂tu es un malade! J'aimerais bien voir cette bibitte en vrai, un jour. Take care buddy!

[@VinyB57]

Merci Jason...tu devrais la voir l'année prochain durant les sessions de lapping a Sanair et parfois à Icar 🚗💨

[@nazoe83]

*lanjutkan berkarya seperti channel Grind Hard Plumbing & Rather B Welding.. ✊*

[@chadlegault9993]

Viny, Your trailer build came up in my suggested videos due to algorithm. I am hooked :) Salut de Ottawa.

[@VinyB57]

Merci Chad! De Sherbrooke!

[@Zeldadbzfan]

Looking great, cant wait to be in another video

[@VinyB57]

Merci Sam! tu devrais voir la vrai patente dans pas long!!

[@tiberiodifrancesco2464]

Finally work on hayabusa engine, good job bro

[@VinyB57]

Yes FINALLY!!!...I will be getting more in small details pretty to get this thing running...can wait to show you guys!

[@stephanuhu963]

As a Canadian South African, I have to say I love the accent. One thing though - look up the difference between 'slots' and 'sluts' 😂

[@koutros100]

Awesome. Funny stuff. Looks like a great build can’t wait to see it running. I broke a tap like that once. I threw the piece out of my garage and I’m sure I broke some kind of Olympic record. Love your humour. God bless brother. Look forward to the next one.

[@VinyB57]

Thanks man! Congrats on your record, I saw it in the Guiness Book...nice pic of you too, you never know how a broken tap can be so aerodynamic! 🤣 OK jokes aside, the Smart Busa runs! and I have about 15 more vids after this one! Enjoy my friend and keep up the funny comments! I like it 👍

[@luckyluke8u]

Good job Vincent

[@VinyB57]

Merci Luc! passe quand tu veux!

[@donjackson5794]

nice Job Vince,You Rules....!! Greetings from Germany!!!

[@VinyB57]

Hey hey! Hi Germany!! thank you Don!

[@watahyahknow]

you could make the axle so it sticks a little through the flange and fit the sticking out stub intoo the chuck then use a steady rest at the other end of the lathe and machine the flange true to the axle that way , last thing to do it cut the stub on the lathe as far as you dare then hacksaw the last bit off could even do a flange at both ends just need to have a longer shaft for the axle to have enough material to get the stubs for the lathe chuck to mount it

[@lindsayk41]

I build cars ground up 40 or50 to this point in my life and it surprised me that I'm only 10% as smart as u!😢😭 THIS WORRIES ME HOW MANY ARE ON UTUBE TEACHING THE NEXT GENERATION we need more lile u!👍😉 And your funny as fu©# keep doing what your DOING!

[@VinyB57]

Oh man...just don't know what to reply to that...thank you is just not enough! Happy that you enjoy my content, I'll keep pushing because of comments and good vibes like yours, again thank you! 👍👍👍

[@lindsayk41]

@@VinyB57 LOTS IF PRESSURE NOW!!!❗❗❗ u my friend are responsible for the entire next generation of progeeks like us!!!

[@Flmarques]

Looking good. What a nice shaft !!! Lol

[@VinyB57]

Why am I keeping hearing that... 😂😉 and thank you Fernando!

[@yj4028]

Just cant wait for your new videos🤓

[@VinyB57]

Very soon-iish..🤦‍♂️👍

[@dmr9042]

so much to learn. keep it up

[@VinyB57]

Thnaks Daniel!

[@alexharrison3275]

Excellent project, thanks for sharing these videos, they're great fun to watch and they're also giving me ideas for my own work! Just one question for now, is there a reason you're not using a diff? After seeing you're skills and tools, you're more than capable of making a chain driven diff from a car one.

[@VinyB57]

Hi Alex, I will experiment will this built a lot of things and there s a lot of aspect that have a question mark on it. But for now, for simplicity reason I used a straigh shaft. Maybe I ll drift the smart busa, maybe even do some ice lake racing, so for now no diff, but maybe one later...will see 🤷‍♂️ Thanks for your question and welcome to my channel 👍

[@better_than_nothing]

OMG! I can't stop laughing!!! Phenomenal!

[@VinyB57]

Thanks man! Glad it made you laugh! 😁

[@matiaspetersen2644]

Yay! Another one!

[@VinyB57]

Oh yeah...and it's just the beginning...🙌

[@JepseStream]

Beau Travail! Keep it up

[@VinyB57]

Merci Jepse!

[@sergiootero4493]

Felicitaciones tremendo profecional un gran abrazo

[@KnownSender1]

Great video man 🤣👍😎

[@VinyB57]

Thanks Ryan! Talk to you on the next one! 😉

[@KnownSender1]

@@VinyB57 yes sir can't wait

[@wciflanker7]

Since you have to make longer headers just get a turbo in there.

[@VinyB57]

🤔😏...humm....you are smart dude !!! I'll keep that reason to explain it to my wife when I'll buy the turbo...😂

[@wciflanker7]

@@VinyB57 exactly. Just tell her in the end its less work then building custom headers and it'll make the car that much more fun to drive. Lol

[@atakansulooca]

Waiting for next episode

[@VinyB57]

It's there!!! Part 5.4 is out!!! 😁

[@wanmuhammadfakhrullahwan8078]

👍👍👍😁😁

[@joshcassidy2092]

I like what you're doing though, and I subscribed. hope you get it going soon.

[@VinyB57]

Thanks for the sub!

[@jrod7017]

👍

[@VinyB57]

😁

[@Earthtrendstv]

You guy just funny..where did you get the main shaft from again!!?😂😂😂😂😂😂 Goodness! Am giving you a Sub right now!

[@VinyB57]

Thank you and welcome to my channel G Kariuki!

[@MrGrandell79]

Nice work!! I have a question though. Where did you buy the sprocket for the reverse? I am currently building a Super 7 with a GSXR engine and chain diff. But need reverse...

[@mikeleonard8031]

You are using a starter motor for reverse. Have you thought of maybe also using a centrifugal clutch linked to the starter in some way. Just a thought.😇

[@VinyB57]

Not really, it works flawlessly! But thnaks for the idea!

[@mikeleonard8031]

@@VinyB57 , I noticed there is a few reverse gearboxes for bike/car applications on the market but they are pricy.I suppose a starter is a quick and easy fix and most probably I will go the same way.I always try to improve and get a better product.Brilliant minds think alike.

[@poke12gauge32]

Is there a shaft hook up like what you built pre made? Just curious because i dont have the machines nor the skill to make my own honestly didnt expect the set up of one of these tiny cars to be so complicated

[@brtn36]

Hi Vinyl B ! Are you using regular motorcycle chain for transmission? Does chain getting hot ? Well done job 👍

[@VinyB57]

Yes and no. I got the highest rated chain (10k pounds) from a motorcycle parts supplier and never got any significant heat out from the chain.

[@brtn36]

@@VinyB57 thanx for your answer.

[@yj4028]

Hi bro. l am also about to finish my Smartbusa project. I think that you have a lot of weight cause of using alot of Steel . wish you all the best.

[@VinyB57]

Hi Yaser, what engine are you putting on?

[@yj4028]

@@VinyB57 Hi Viny my engine is a hayabusa stroker 1500 cc built by RPE it was removed from a radical car.

[@drtiagofernandez]

Does the reverse worked well ?? There is any movie showing how it worked ?? Thanks sir.

[@lukewang4396]

great,

[@VinyB57]

awesome,

[@gashparperformance113]

👌

[@VinyB57]

👍

[@robbyvenetian]

Viny, you are great! Let me ask you, do you think there was a way to build a shaft instead of using a chain with sprockets for the transmission? Thanks.

[@VinyB57]

There's always a way....but it would need a 90° gearbox on top and a diff at the bottom...with a driving shaft between those 2....which is not such a bad idea 🤔, if you can find a 90° gearbox compact and stroung enough for the Busa engine. 🤷‍♂️ Thanks for your comment Rob!

[@robbyvenetian]

@@VinyB57 thanks for the answer. Now I have more things to think about haha.

[@Ordinary-drummer]

another awesome video !!! im gonna need to wait 2 weeks casdjn vjhibsudfvuasd.... cant wait .....

[@VinyB57]

Aaaahh...yeah...but at least you know that there's gonna be another one soon-ish... 😅

[@Ordinary-drummer]

Viny B indeed.

[@susanin5109]

Не поедет она назад. Я так делал.)

[@BEYTEK]

awww man i want to busa swap my daihatsu mira

[@BEYTEK]

subbed

[@VinyB57]

Thanks for the sub! Hope you're enjoying the serie!

[@BEYTEK]

@@VinyB57 I am. I got lost in it. Haha. Love the videos.

[@joshcassidy2092]

hey, so when you engage your starter, your wheels are gonna start moving the car forward.... or am I missing something?

[@joshcassidy2092]

which would work, but you'd have to jack the back wheels up off the ground to start the car and leave the clutch engaged with it in 1st gear while you engage the starter. then take it out of gear before you lower it. it'll work at the track as long as you don't stall it.

[@VinyB57]

Hi ​@@joshcassidy2092 ! Just to be clear, on the smart-busa there's 2 starters, one on the hayabusa engine itself, to start the engine and one big V8 starter on the sub frame to give the car a reverse, does this answer your question?

[@joshcassidy2092]

@@VinyB57 yes!!! OMG!!! That's genius!!! So you're using the starter off a heavy truck as a reverse motor. Ya know, if you think about it, you kinda have a hybrid smart car now...

[@VinyB57]

@@joshcassidy2092 That is exactly what I'm saying to my wife....I'v got now a hybrid car!! 😅

[@slyddistrict7333]

I really need help with parts for my build, I'm highly limited on tools and such...can you help?

[@VinyB57]

Ask your questions, I ll do my best !

[@antonioraffaele9131]

hy you are bulding my dream...dut i think that the engine is to high and you can study a differential for the transmission what do you think about?

[@VinyB57]

Yes and yes..😅 nothing to add here...😁

[@MitchieFerg]

What’s the music at 4:00?

[@ivansidoruk7542]

do you make those axles for sale?

[@rickt1866]

HE HAS TO BE CANDIAN NO ENGLISHMAN WOULD EVER BE 2K OUT

[@VinyB57]

I'm so canadian that I didn't even get that reference of '''be 2k out'' ? 🤔

[@1silvervespa]

Loud as hell ... Going to need sound dampening .

[@VinyB57]

If you're talking about the reverse loudness....go check my last video, part 13, spoiler alert, at the end I'm backing out and it's super smooth and not loud anymore!

[@antonioraffaele9131]

and whoen the last video??

[@VinyB57]

Hi Antonio, there should be 1 or 2 videos left on the smart-busa...the end is near!😅

[@ivansidoruk7542]

do you have social media? thanks

[@norrisabram9577]

Stop trying to be funny, and continue to do what your good at doing, machinist 😮

[@VinyB57]

ok mother! 😅 Btw, this is an old video...dont think it s a good one, I refine my style with time, btw#2 Im a mechanical eng.,

[@lolcrashtv5690]

wtf, never use gloves on a lathe

[@VinyB57]

🤷‍♂️