SMART TIE Rebar Tying System - Evolution of rebar tying

Visit the website: www.smart-tie.com/
The Smart-Tie is a fast and innovative rebar tying system. It is composed of a device adoptable to any screwdriver and a wide range of clips for the most various tying combinations.
This innovative and patented system is designed to improve the quality of rebar tying.
The system guarantees a lot of advantages, like better quality, versatility and safety.
Made in aluminium and special steel.

[@thatguywiththeface1741]

Yet another battery powered gadget. Looks about as good as a tie gun. Great for knocking out a bunch of mats or some mesh for a slab but I'd never use that for a pier or grade beam.

[@PacoOtis]

Come on you folks!! Remember John Henry and his race with the steam powered hammer? He won, but he died! Same, same with the introduction of water powered looms in Europe. Get in gear and help these folks build better machines so you can use you talents and knowledge to keep our productivity as the standard of the world. Best of luck!

[@irondiver292]

Joseph Stokes lol. This is a joke

[@Tadesan]

And if you like this product please consider supporting me on patreon.

[@Musky37373]

How you supposed to draw the bar in when the bends aren't right? Union rods rule

[@Milwaukeelors]

This tool you have to be careful how you use it. The problem you face is in the twist. The wire twist is so tight it shears off and the twist follows an upward motion leaving the rebars loose. Either way you do a twist the point to turn and pull.

[@ExcavationNation]

Max tie gun use everyday this method is um cute

[@tomlund4951]

Nuff said!

[@Enigmahoodie]

Twister and hand ties. I can tie a whole mat in 10 minutes

[@gilsonmarques1370]

Como faço pra mim comprar esse aparelho ? Qual o valor deles?

[@jonilakso6508]

Too slow and too big tool for real working site.

[@eltallerdeelberg....1273]

Somethings are done by hamd for a reason... Some people just dont get it....

[@prabuscross1.663]

Anybody using it,is it worth buying it

[@jansonsiahaan254]

Bagaimana cara mendapatkan barang ini,,, beli dimana?

[@cslocal86]

as a union ironworkers local 86, I do not see this as efficient nor safe. the tie is not tight. The cage will not hold up to the transportation and setting process because the ties are not tight.

[@schnellsmarttie5290]

Dear Christopher, Thanks for contacting us! Please visit our e-commerce www.smart-tie.com and find all the videos and the specific instructions for the correct use. Best Regards!

[@cslocal86]

Johannes Griep i agree. i have raced several times a specific tying machine and i am faster than the machine. i am by no means fast. i am efficient.

[@dustoin1386]

Lost your credibility when you said you're a union worker. Slower inefficient process's are what keep unions around. In the real world where shit gets done ...

[@cslocal86]

dus toin it sucks that you have had a negative experience with unions. I would encourage you to go to the local 86 Union Hall check out the apprenticeship with an open mind. first year apprentices start out at $26 depending on experience. and then come up to one of my job sites. hopefully you will have a more positive experience. then you can see how we do things in the Pacific Northwest.

[@dustoin1386]

I'm a general contractor.

[@sunilgooray5408]

How can I buy

[@zacandmillie]

I use to tie rebar way back in the 1980s. I pair of nips and a roll of wire on our belt worked for us. No need for a heavy power tool and to have pre-bent wire ties. I'd call this WOFTAM (waste of fucking time and money)

[@HogeN1337]

well idea is good but needs back to drawingboard.

[@alanjones7429]

way to long u need DF 16 Rebar binder by Wacker Neuson

[@lonewolf4712]

Agreed,its somewhat primative compare to df16 WN

[@feyslay1324]

Terribly big and round tool for a simple little task.

[@jaredhansen5969]

Real Journeyman are laughing...

[@howl1208]

比手工的還慢3倍速 欸

[@user-pe6li9br9h]

這要是在台灣 應該被轟出去了

[@sugichanneru]

手でやった方が早い

[@pulporock]

Any one doing rebar tying would not want this tool. Even at waste height and easy access it looks ridiculous.

[@MiguelAngelOcon]

LOL

[@chadsims24]

Garbage, gimme a pair of kleins.

[@johanagarcia871]

Local 86. Come get sum

[@joseeduardovalenciamoreno4066]

Mal pura gente froja y no se ve tan seguro

[@jonilopez567]

mal eso esta mal

[@damienbrady230]

😂😂😂😂😂😂😂😂

[@juansantiago780]

I tie way faster then that

[@schnellsmarttie5290]

Dear Mr. Santiago, Smart Tie system has several advantages, included that it doesn’t require repetitive rotation of the hand and wrist thus reducing the risk of carpal tunnel type injuries.

[@donguadalucio1405]

That is not an evolution of the rebar tying. That is going backward.

[@ZAC____]

rod busters can ties faster than this thing and better

[@irondiver292]

ZAC LLOYD look below. Even the Chinese think it's garbage

[@bradleyh4411]

bleh

[@deepakgamit6276]

This not effective tools its unefficient

[@Balenza345]

What a crap tool. Knips and wire coil if faster and stronger.

[@diegoflores6824]

Eso no vale

[@highlandermachineworks5795]

Gloves and rotating equipment? What a wonderful way to get your fingers torn off....(sarcasm). Don't do it. Having been in the medical field I've seen what gloves and rotating equipment can do to your body. If there is one rule by the safety Id10ts to disregard that's it. I'd rather have a few tiny cuts from the tips of the wire than have my fingers twisted off. Look it up. Glove injuries are gruesome.

[@j.r.w7636]

Booooooo

[@cgrobe21]

Would not pass for structural tying. Maybe a garage or house slab. This tool is a joke

[@sergio26485]

Attrezzo inutile e perdita di tempo. Molto meglio il vecchio metodo film di ferro e tenaglie in mano.

[@loganconnally4361]

This is such a joke, not only is it slow as fuck, but you have to carry those stupid ties with you, tying by hand is probably 3 times as fast, or spend the money on an actual rebar tier

[@nibbnibb1899]

This is the most stupid thing ive ever seen. I work in reebar and concrete and there isnt anyone in there right mind that would ever use anything than a max reebar tier. Tgis device takes to long and is a waste of time. Either u tie reebar with pliers or u use a max reebartier.