Smith & Wesson M&P 15-22 Volquartsen Extractor How to install

[@UncleFungusSus]

This Is the first video on YT that has a clear how to on the installment of the Volquartsen exact edge extractor.thank you for showing me how to do this

[@JJMTrucking]

Wow Thanks for the feedback! I'm glad I could help you out!

[@jasonsilevinac3158]

Mr AdrenalineRush -I fully agree. The lighting was perfect and you were thorough. Thank you

[@kyhermit]

My factory extractor flew out of the bolt while shooting on the range and I could not find it. I was lucky the spring and the other small piece were recovered. Rather than send the gun back in to the factory and wait who knows how long for repairs, I watched your video and ordered a new Volquartsen extractor. A few days later it arrived in the mail, I rewatched your installation video and installed the new one with no tools whatsover, just gently did it by hand. Took all of 30 seconds at most. Immediately loaded up a mag and the gun shot flawlessly. Your video was beyond helpful. Wish I could shake your hand in appreciation and buy you lunch!

[@Guitarsdetectors]

Wish all videos involving detailed work were this clear. Great job!

[@JJMTrucking]

Glad you enjoyed it!

[@cingram8939]

Dude,,that was definately awesome,,yes sir I am also one to do my own gun smithing,,,too easy,,u made it very easy,,,from NC,,I appreciate that!!!

[@JJMTrucking]

@@cingram8939 I'm always taken back when I can help people through KZbin. I'm very happy I made a good video to help people thanks!

[@ScottySpeeks]

Having a lot of fun with this rifle. Even with good ammo I get a FTE about every 1/80, Cheaper ammo 1/10. Heard the Volquartsen is the way to go but was unsure if it was something I could easily do. Suffice to say after watching this my new extractor should be here in a few days and installed about 5 minutes after opening the package thanks to you. I appreciate you!!

[@dillonbuckley4618]

Wow I wish all instructional KZbin videos were this clear and straight forward, absolutely fantastic job!!

[@JJMTrucking]

Thank you! Glad it helped!

[@stephensynergy]

Just received my Volquartsen replacement parts yesterday and am about to confidently replace the M&P 15-22 parts. Thank you for this timeless demonstration.

[@JJMTrucking]

Absolutely! Glad you saw my video. You will never have an fte ever again!

[@dwells3536]

Just wanna let you know that 2 years later your video is still helping folks. Thanks for the upload! Did you notice immediate changes when installing it?

[@JJMTrucking]

I try my best to read and respond to everyone's comments. And yes it was an immediate change that no rounds after the installation would jam or failure to eject.

[@souldustpro]

Now 4 years later... Thank you, this video rocks!! Simple, accurate, to the point, and killer soundtrack...

[@danhanley1313]

great video, straight to the point and easy to follow.

[@dj3114]

Perfect video as my friend tore off his extractor with chamber flag. I ordered the parts and with your video, had it fixed in three minutes or less. Well done and thank you.

[@nicks3486]

5 years later this video helped me out, thank you. 👍

[@JJMTrucking]

I'm glad this video is still helping people out. Thanks for watching!

[@dcoidua]

Thank you for showing this install quickly and thoroughly. Helped a lot.

[@JJMTrucking]

Glad I could help!! I wish other video were this clear as well haha

[@martyyoung3611]

My youngest son got a M&P 15-22 for his birthday. First mag worked great, every mag after had numerous FTE. Put one of these on the rifle, zero FTE. It now slings the brass like a HK.

[@JJMTrucking]

That's awesome! I have found CCI AR Tactical ammo works best soo I use that

[@bococustoms8890]

My extractor came apart while rapid firing so I bought the upgrade kit thanks for the knowledge your a true hero

[@JJMTrucking]

Glad it worked for you!! Rapid fire safely and never at a range

[@jahrod3810]

Went from 1/10 rounds jamming to 1/500. Thank you for the easy and straightforward video!

[@duhbaws2705]

Nice! at 1 in 500 id chalk that up to the ammo!

[@JBmusicart]

Thank you. I just got a 2020 m&p 15-22. First time out, would not eject. I found this video, realized these pieces weren't in the bolt. Found them in the box

[@JJMTrucking]

They should be assembled already. I would give the rifle a good look at and be ready to send back in case

[@JBmusicart]

@@JJMTrucking ok

[@JBmusicart]

@@JJMTrucking I put it all together. 👍

[@JBmusicart]

Your video helped. Thank you!

[@JJMTrucking]

@@JBmusicart Glad to hear. Thanks for watching!

[@PopCultureDefector]

Brand new. Very first thing I did was take this thing apart..and swap out the stock extractor with the Volquartsen extractor. Using this video. Thanks, man!

[@johney4484]

This is a great upgrade and fix for the 15-22. No more jamming issues for me.

[@JJMTrucking]

Everyone with this rifle should do this! It feeds soo smooth now and no jams! I'm glad this video continues to help others. I'm happy for you brotha🙌

[@BubbaBigDude]

Great video - still helping people in 2022. Thank you so much!

[@treb7770]

Excellent video. Just changed mine out no problems. Thanks buddy!

[@JJMTrucking]

Glad my video still helps folks out. Thanks for watching.

[@orionsbelt3332]

Wow! ..Finally a close up video that I can see exactly how the microscopic parts are reassembled !! .... I'm ready to attempt it on my own now...lol... Thanks for making the video...

[@JJMTrucking]

It's much easier than I thought. Goodluck glad you liked the video!

[@orionsbelt3332]

@@JJMTrucking Just hope you know that the time you all take to make these videos is very much appreciated.......thanks again and take care

[@PMD_Bill]

YOU ROCK!!! Plain, simple, to the point, well lit video. Perfection!

[@salroth420]

This fixed my gun not a single ejection failure! Fantastic video! THANKS SO MUCH!!!

[@JJMTrucking]

Glad I can help! I'm soo thrilled I helped all these people. I use CCU AR tactical ammo. Great ammo! Happy shooting!

[@billelston677]

Thanks for the great information, I ordered mine today to fix ejection problems!

[@JJMTrucking]

Hopefully by now you are not having any more issues. Thank you for watching my video!

[@billelston677]

@@JJMTrucking thanks, I am not having problems, you solved it!

[@dbu3619]

Excellent zoomed in and high quality video with good lighting. Super clear and easy to see exactly how to remove and install the extractor. Thanks!

[@JJMTrucking]

I'm glad it helped you and that you enjoyed it, thank you!

[@mnrodriguez]

Love the music and the simplicity of your instructions!

[@JJMTrucking]

Thank you!

[@Tumbangpreso]

Fews years had past and this video is still useful. Thanks.

[@JJMTrucking]

Glad it helped you! All the comments make me happy that I've helped soo many gun owners!

[@gardenersuccop7333]

Very helpful. And it beats shipping back to S&W

[@Red5]

Thanks for the video. I just got my 15-22 and haven’t fired it yet, but I’m going to change the extractor based on popular opinion 😂

[@JJMTrucking]

Worth it! I use CCI AR Tactical .22lr rounds and they shoot fantastic

[@lividthoughts]

Seriously thank you for this ..simple and to the point

[@JJMTrucking]

Glad the video helped out!!

[@danhanley1313]

Great video, clear and easy to follow. Thanks.

[@99cobra2881]

Thanks for the video! Just swapped one of these out. Your video made it easy.

[@alecs5150]

Outstanding, lays out the sequence perfectly with excellent vid!

[@ironhorse127]

Only one word describes this video. OUTSTANDING!

[@JJMTrucking]

Thanks bud!

[@alwayswining1111]

Thanks for the video man. Great tutorial and easy to follow. And a Great addition. Keep it up ! 👍🏼 💯

[@TheAdmiral8492]

This got me out of a jam while at the range thanks m8

[@JJMTrucking]

Wow glad to hear it worked for you especially at the range!! Thanks

[@bradley1154]

Mine caused a jam and the bullet exploded in the chamber, ordering one of these tomorrow and gonna call and bit** s&w out about it

[@JJMTrucking]

@@bradley1154 it's called an "Out of Battery" fire. It happens when the bolt isnt fully closed but the striker pin is still able to make contact with the bullets primer and allow it to fire. It is very dangerous. But about calling customer service and yelling at them, please keep in mind the person you speak with over the phone is NOT the person who designed the rifle and that they are still a human being, and I ask that you share your concern in a firm yet calm way please. No one should be yelled at for something they did not do.

[@jcmcop]

Best video on this extractor replacement. Excellent! Thank you!!

[@JJMTrucking]

Great to hear it helped you! Thanks for watching!

[@MikeM-ld1rw]

Great video, thanks man. I'm doing this upgrade to mine tonight. I'm jamming every 3 rounds or so. Not fun and not ok. I've read good things about the Volquartsen extractor. I also got the upgraded spring for another $2 or so....about a $15 total. I'm excited to get this done and see how she behaves. Thanks again for the great demonstration!

[@JJMTrucking]

This extractor fixed all issues for me. You are going to love your gun all over again! Thanks for watching!

[@baksa6171]

AlwaysChangingMind did s&w fix this on the gen 2?

[@847lifestyle]

hows that upgrade going? I am thinking about jumping

[@MikeM-ld1rw]

@@847lifestyle Major improvement! rifle operates basically flawlessly now. Very happy with it!

[@847lifestyle]

@@MikeM-ld1rw right on. I ordered mine saturday after a very fluster filled trip out to the berm lol

[@mkxiong6427]

When my 15-22 blew up in my face, my extractor and spring flew out. Ever since then, I’ve been shooting without it. Just have to manually take out the round if I go hunt and get nothing.. lol. Now ima buy a new kit and replace!!

[@lwstruyk]

Great Job ! Great lighting and close up. Installing mine tonight. Thank you !

[@whitejm44]

Perfect video! Thank you. This helped me get the extractor back in

[@JJMTrucking]

Great man, I love when people comment and thank me. Feels awesome I can help soo many people like you!

[@deltadragon2335]

Thanks for the vid I just kind of dissapointed I had to get an aftermarket park to make my 15 22 more reliable especially since the gun itself has been out for 13 years I figured smith would fix the extractor I even sent mine in to smith and the same thing happened when i got it back

[@SheitlQueen]

great simple to follow video. thanks!

[@pastrocks85]

Thanks for amazing video, just switched out my extractor, can wait to take it to the range!

[@JJMTrucking]

No more fte!!!

[@jmijares1]

Thanks for the helpful video. Easy removal of old and install of new in about 30 seconds.

[@JJMTrucking]

Thanks! Glad you liked it!

[@FatPeaches330]

Fantastic video! Thank you so much for the clarity and lighting on this.

[@JJMTrucking]

Hey thanks! Very happy this worked out for you! Merry Christmas!

[@wildazme2006]

Why remove the spring? Once the factory one pops out you just pop the new one back in?

[@KPotassiumK]

Love the attention to detail. I’ve been shooting guns for a while but i haven’t done much with the components of the actual guns so this is gonna be new to me. I heard that this is one of the best things to do for your 15-22 tho so it looks like im going to have to go for it

[@JJMTrucking]

I was shooting alot of Aguila and Federal but they jammed which is why I made this mod. The best Ammo I've shot with the 15-22 is CCA AR TACTICAL. Love that stuff

[@steved3387]

@AlwaysChangingMind THANK YOU for this!!!!- installed mine 30 minutes ago- cant wait to shoot!

[@JJMTrucking]

Glad the video helped! You'll be able to shoot almost anything no issues!

[@rstevenhanson]

So what is Smith & Wesson thinking? Mine jammed on every shot out of the box. I closed the gap on the ejector and it only jammed on every fifth shot. Just replaced the extractor (thanks to this video) and haven't had a jam yet. The manufacturer knows what's wrong and they know how to fix it. So why don't they? Really disappointed in them.

[@leifhelland5747]

Love you for this video! Thanks a million!

[@1947froggy]

Loved it but, the music, ugh. Just talk about what you do for the upgrade, thanks.

[@jakepschirrer9150]

Awesome video. Thank you.

[@adamhearts9195]

Thank you for this video it helped me with the process,,, I also ordered their upgraded firing pin but that process looks a little bit more involved I'll check and see if you have a tutorial for that as well

[@chrisusa8167]

Disappointed S&W have such issue, I just received the rifle today, the clip was found in the bottom of sponge, the sprint disappear, the pin still in the VE.🤕 Actually what is this VE work for? the bullet always jam in the ejector is this reason?

[@kyleowen6843]

Great video!!! I just installed mine to fix my problems

[@JJMTrucking]

Hope it helps like it did for everyone else! Thanks for watching.

[@deving1361]

Thank you so much for taking the time and making a straightforward video. Sub just for that

[@JJMTrucking]

I'm glad you enjoyed the video. I'm happy that it has helped soo many other 15-22 owners out!

[@360woodierc]

This was great thank you.Just picked up this gun yesterday and also fixed the ejector gap issue.Would you know if the top edge of that ejector that I adjusted is supposed to slight rub against the bolt? Or should that be slightly gapped also? Thanks again for this vid. I just ordered that part. Looks much better made than the original part.

[@Michael0416]

Thanks for the video. Made swapping it out a 2 minute job.

[@JJMTrucking]

I love when people have an easier time with this install because of my video. Glad I could help!

[@rartu]

Is that the "Power Stance" song?

[@justincredible7886]

Great video. Unfortunately I dropped the new extractor next to the old extractor and I'm unable to tell the two apart.... So I'm not sure if the new one got put on or the old one smh

[@JJMTrucking]

One should be longer I believe. That's the Volquartsen one

[@D1amondeyes]

Thanks for the help

[@stagsmcnasty1]

Thanks for the quick tutorial

[@JJMTrucking]

Absolutely thanks for watching

[@mr.horseshoe2301]

Just bought a 15-22 from Palmetto State Armory. Do the new ones still have the extractor issues?

[@JJMTrucking]

I believe they do have issues yes

[@dankirschnick9208]

thank you very much

[@JJMTrucking]

You are very welcome. I'm glad to hear my video helped you!

[@INeverMetAGunIDidntLike]

Thank you.

[@shanewebber1562]

I need a extractor for my m&p 15-22 my son barrowed it and went to clean it and put it down tell morning will some where in the night it got lost ,so now I'm trying to find one it's been out of stock wear can I get one any idea

[@timhall4154]

Excellent just what I was needing

[@JJMTrucking]

Great! I'm glad you enjoyed. It seems many people enjoyed this video and I am truly happy for that. Thank you.

[@gmajors2237]

Nice job. Thanks.

[@lurkerslair1079]

Replaced mine with ease few minutes ago thx to your video. Thanks!

[@JJMTrucking]

Awesome! It will definitely shoot much better after that, if it doesnt, message me again. You will never have another FTE in your life. Now, be sure to use decent ammo as cheap crap ammo can still FTF.

[@ChiCub83]

You are awesome! Stovepipe no more!!! How are they not fixing this?!?!?!

[@JJMTrucking]

They havent addressed this issue. There is however, a recall on them. I havent sent mine off because I've heard alot of bad stories. I plan to keep mine still.

[@Resident-cb3yz]

Hmm you could cut one from titanium with a handsaw. 2 euros material but you have to do filing too. Maybe 30 min job max.

[@Gahttz]

While taking the original one out my spring went flying and now I cant find it anywhere

[@JJMTrucking]

That does happen to people. Of course you need to find it. Or you can call Smith and Wesson and see if you can order that part

[@Gahttz]

@@JJMTrucking I found it thank God lol

[@JJMTrucking]

@@Gahttz haha cool man, mine flung across the room once too.

[@Gahttz]

@@JJMTrucking time to take out and see if the ejections problem is goneHaha, did it help yours alot? ,

[@JJMTrucking]

@@Gahttz mine required it. Ever since I had no fte's/jams, anything.

[@brbv4473]

Great video!

[@JJMTrucking]

Thank you! Glad it helped out. Happy shooting!

[@lawson9102]

Good information

[@applejuice-4706]

Talking would have been much better than music however thanks for the detailed video!

[@JJMTrucking]

My commentary would have degraded the video. Not good at talking much. Glad it helped out though!

[@applejuice-4706]

@@JJMTrucking No worries. Yes, the video did help very much. I am very grateful for the time saved & I cant wait to see how the new extractor improves the experience.

[@tracytremelling388]

To the point. Great job. Thank you.

[@JJMTrucking]

Thanks! Glad everyone likes it

[@EricBurcham27]

🙏

[@ernestocasanas1137]

Nice, thanks

[@nicolassawicki4978]

Muy bueno tuve que darme cuenta solo como se saca si hubiera visto esto antes

[@131Blitzer]

This was a fantastic video thank you!

[@JJMTrucking]

Your welcome! Glad it helped!

[@aruba4lyfe]

How is this taking people 5-7 minutes to complete?? Great video!

[@JJMTrucking]

It took me that much time my first try. Thereafter, should take under a minute! Thanks!

[@NPAMike]

do you need any special tools or can i just use a tiny flathead.

[@JJMTrucking]

I used a small flathead used for watch repair. I dont believe you need Special tools!

[@LKaramazov]

I think even I could pull that off!

[@kratomgaming]

What I don't get is why S&W doesn't make more reliable extractors. Especially with SO MANY people having issues...

[@markwilliams8292]

thanks easy peasy !

[@JJMTrucking]

I'm very happy you got it fixed! I'm very glad I could help 👍

[@markwilliams8292]

@@JJMTrucking I put the Volquartsen extractor and firing pin in this afternoon and ran 350 rds assorted bulk ammo 0 FTF 0 FTE... best $38.25 I have ever spent on a weapon !

[@JJMTrucking]

@@markwilliams8292 Exactly the same for me. I has about 1 fte every magazine. Not I havent had one since!

[@tcmcclure2323]

Thanks 🫡

[@baksa6171]

Is this gen two?did you see any difference from the stock ones to this new ones that you installed?

[@JJMTrucking]

I'm not sure. I believe this is Gen 2

[@baksa6171]

AlwaysChangingMind m-lock hand rail?i just bought mine fte is not a problem but i have 5 ftf couldnt press the trigger...i think i did not load it rright or because of my cheap ammo...

[@JJMTrucking]

@@baksa6171 Yes I have a Gen 2. I always use CCI AR Tactical ammunition and its has been great to shoot. I never had a ftf always fte. I've use Aguila, Federal (multiple types) CCI. CCI has been the best imo

[@baksa6171]

AlwaysChangingMind my 15-22 likes that aguila ammo...$2.99 at big5!!!!!

[@steved3387]

@@baksa6171 Mine DOES NOT like Aguila FTE's all day long. FYI

[@rstevenhanson]

Is FTE failure to eject?

[@joeyrusso6944]

Yes

[@BadAndy01979]

Thank you so much! I just ordered one. Are you happy with it?

[@JJMTrucking]

It's been great ever since! Check the other comments and many people are more than happy with theirs!

[@BadAndy01979]

Thanks for responding, I subbed. I was having issues with different manufacturers, Thanks for the detailed video. Right to the point.

[@JJMTrucking]

@@BadAndy01979 I used 3 different ammo brands and they all had issues. Now they are all good but I prefer CCI AR Tactical

[@BadAndy01979]

Awesome 🤘

[@BadAndy01979]

Finally got rounds thru at the range 4 different brands of ammo and not one failure! Before I had countless issues, stovepipes , failure to eject Thank you for the video.

[@WrightlyDivided]

Ordered 15 22 kit and the spring won’t fit damn

[@JJMTrucking]

The kit doesnt come with a spring. Only the extractor.

[@nicfields6856]

Thank you like and sub 💕

[@AlexAlexandre-w5k]

Bom dia bom dia meu amigo eu gostaria de saber quantos que você faz um ferrolho desse para mim

[@3gnuk283]

Hi, I’m enquiring to see if it’s ok to add your video to our website. We sell this extractor in the U.K. & produce 15-22 parts. It’d be good to add to our how to video page to show how to install the extractor. Thanks in advance.

[@JJMTrucking]

3GN UK TV of course go right ahead!

[@JJMTrucking]

3GN UK TV what's your website, I'd like to check it out!

[@3gnuk283]

AlwaysChangingMind hi, it’s www.3gunnation.uk have a look and see what you think. I’ve added your video for now to our ‘how too’ page on our online store.

[@JJMTrucking]

3GN UK TV awesome, well I hope it helps the customers with installing their extractor! Thanks for reaching out to me first, thanks

[@risenfromyoutubesashesagai6302]

Dude, look at your sub count.

[@jasony724]

Had to keep trying to look up cause the idiot kept the camera under the insertion point! Yes I know it’s a video and I can’t actually look up inside where he’s replacing it lol. I felt like it would help also if I tried moving my phone up in over to see what’s going on lol

[@rwmagnus]

Very good video but do away with the music. Why does everybody think a sound track is needed when not narrating?

[@JJMTrucking]

I dont need to narrate. It's very simple process.

[@blipperUT]

I didn't like the music either but since there is no narration, I just muted it.

[@billiarboy]

Thank you

[@blackriverjerk7789]

Thank you