Smith Wesson M&P 15-22 Trigger Install

[@TYMWLTL]

Just got my CMC trigger and your video is just what I needed to know about that safety take down. Thank you sir.

[@alexkadarjan8894]

You get light primer strikes for anything less then 4lbs with the 15-22. Had the jp spring for a little and roughly 1 out of 20 had a lps. Switched it back and it ran perfectly.

[@massachusettsprepper]

A very detailed DIY on this trigger install for the 15-22 thanks for sharing brother.

[@briancaine9130]

Great video. I bought a 15-22 that had been modified with a Timney Impact AR drop in trigger. This trigger is now not supported by Timney for the 15-22. Too many issues I guess. I have the CMC and the original M&P trigger and will put one one in. Your video will be a great assist. Thanks.

[@fumasterchu12]

Another great tutorial, that looks like an awesome trigger. I ordered another 15-22 tonight from PSA, actually paid the same price I did 8 years ago and free shipping. I'll be doing some upgrades to it, mainly the buttstock and probably the trigger. Cheers brother!

[@gunsaccessories8853]

Thanks man! You rock. PSA has had a good price on them.

[@sgt.squeegee5953]

I bought the curved trigger from cmc and I called them and told them I was putting it into a 15-22 sport and the sent me pins that were longer than the stock pins that came with the trigger. They fit the lower perfect. Very happy with the light trigger pull.

[@Steve-Goff]

Thanks for taking the time to do the install video. I wish I would’ve bought one. My upper is supposed to be delivered sometime today

[@jackammo9745]

Nice. CMC also makes dedicated pins for $12

[@rylch44]

Good looking trigger group. Thanks for the install vid man.

[@gunsaccessories8853]

Thanks for watching!

[@johnbyrne8024]

@@gunsaccessories8853 Hey buddy, I’m just wondering if I used a timney or triggertech for my 15/22 would I still need the anti walk pins? Thanks a million

[@larrybaker5316]

I put a CORE 3 1/2 pull in my AR, works great!, put the CORE 3 1/2 pull in my Ar15-22 and had lots of fail to fire, even with 4-5 different brands of .22lr., did this trigger fire ok in your 15-22? Core said I could send mine back for testing and if it was bad they would replace n/c under the fantastic warranty. I really like the CORE in my big AR, crisp, clean pulls every time. Any thoughts? ?

[@cjt-zv8vx]

Excellent upgrade, however as you mentioned about the possibility of binding, the 15-22 specific pins from CMC eliminate that problem. When I upgraded my 15-22 trigger to the CMC, I received the standard AR length pins. A quick call to CMC and they sent me the 15-22 pins free. There is no possibility of binding with them. That was a couple years ago so I don't know if they will send them free any more. Also look into the Battlearms Development Ambi- safety specific for the 15-22, another great upgrade for about 50 bucks.

[@sgt.squeegee5953]

cjt1331 yes they still send them for free just received mine from cmc a couple of months ago

[@ironhorse127]

They would not send me the pins for free. Referred me to the link to buy them. No thanks. I bought them from another source for almost 1/2 their price.

[@metthem88]

*Looks good... Good heads up about the lower being polymer; that's easy to forget about*

[@brianfischer5609]

Yeah, I stripped out the receiver switching out grips. . . Luckily I had a longer screw from a different grip, and it was able to get to the threads at the end😂😂

[@TheCFN007]

Merry Christmas & Happy New Year, Keep up the hard work :) Cheers

[@barthutchison4207]

"Make sure the chamber is empty" looks like the snap cap was still in there. Oops !!

[@I8THEmagictoaster]

you need the snap cap in there for .22, it's not good to slam your steal firing pin into the steal of the barrel when dry firing...

[@tonehernandez5730]

There was this man who was wearing a black guns matter shirt said at bass pro when i get my m and p to switch the trigger. This is what he was talking about!.

[@cmichael2005]

I had been watching your video over an year, Great job, I finally bought a M&P 15-22 Moe SL version today, Out the door 449.60. This rifle is for my 9 year old son for Christmas. What kind of RDS that you recommend ? I have a Venom RDS for My Mark IV, Love it.

[@DesertTactical]

Any drop in AR trigger will work for the 15/22?

[@blairshepherd608]

I love my s&w 15-22 but hard to get parts here

[@sergentecypress2603]

Hello is it possible to see a video on how to mount a fixed stock like BROWNELLS AR-15 RETRO BUTTSTOCKS on the MEP 15-22? Thank you

[@KB0OTY]

I stripped my grip screw hole and fixed it with a heli coil. I got lucky with that one I think.

[@scottf.3808]

Nice trigger install and vid...Good stuff...

[@scurry8987]

The JP interprise trigger does not work on the M & P15-22

[@badbilly429]

sweet upgrade man!

[@AlienHazard]

Can someone please tell me how I can add a bottom rail to the hand guard on the new 15-22 sport model? The new one doesn't come with the quad rail anymore :( . I want to install that angled fore grip just like in this video. Thank you!!

[@georgedasani]

They have accessory rails available, just find one that is M-lok compatible. BCM and magpul both make rails that can be installed with that M-lok handguard

[@ironhorse127]

Nice video. Looks like a fine upgrade. Does this trigger come in a curved version?

[@gunsaccessories8853]

Yes it does. They are great triggers. Thanks for watching!

[@ThinkTee1]

Was this the stock hand guard?

[@kirkland0074]

I have this trigger and My trigger is stuck in the cocked position and won’t drop on fire nor safety

[@Hydro144]

Did you figure out why yours did that? I had the same issue as you but with the stock trigger. I came back a day after having the issue and pulled the charging handle back again a couple times and fiddled with the trigger and it got unstuck.

[@cmichael2005]

With the SD-E trigger and with KNS kit will fit on 15-22??

[@johnathankim6721]

3/16 hex wrench to loosen the grip?

[@BEMFreedom]

Great price on those triggers.

[@buckbuster6213]

Great tutorial! Thanks for sharing!

[@rwmagnus]

Very nice trigger install video, great content but switch to decaff. You had enough jittery movement to make me seasick! Another thumbs up from me.

[@gunsaccessories8853]

Thank you!

[@georgedasani]

Haha i was thinking the same thing. Instead of caffeine i was thinking he was on coke or something :)

[@calypsohandjack9278]

I have an ambidextrous selector switch and it’s not coming out at all after the handle is removed. Any tips!?

[@troyreardon7428]

An easier way than mentioned that i use to remove my safety selector switch it about halfway between safe and fire then pull on it it should come out with no problem when putting in new safety selector you will have to depress the d10 to slide it in i hope this helps

[@calypsohandjack9278]

@@troyreardon7428 thanks

[@troyreardon7428]

You're welcome let me know if it works out

[@bigjonesy77]

Good video and tips thanks for sharing

[@channelcatchaser9426]

Great video!

[@ethan9582]

what grip is that, been looking for one myself

[@hondasaurusrex6998]

Looks like a Magpul product.

[@subrosa4792]

Magpul SL. There are several versions available. Make sure you get the “SL” version. I’m using the MOE SL MIAD 1.1 grip with the oil bottle insert. It comes with extra parts like a Glock grip does, there’s an option for a finger groove in the front, and several backs with and without beaver tails.

[@plow9133]

fun ar to shoot i love mine , maybe have to do some updates to it

[@tacraheennc9719]

How you get the buttstock off the gun please let me know

[@SouthernGround]

you can't, it's welded on

[@Moby604]

why cant we have a lower or upper metal AFTER MARKET TO PREVENT THAT CROSS THREADING ALL sMITH AND WESSON IS MAKE ONE

[@bbbvvhk]

Slow down man