Sniper's Hide Tikka T3x Project Introduction

Sniper's Hide is starting our Tikka T3x Project, so here is the intro video to explain the plan
Sniper's Hide Website
Subscribe to Sniper's Hide: / shlowlight
Visit www.snipershide...
Or chat in our forum at www.scout.com/m...

[@stihlnz]

Hey Frank, Thanks for all your methodical work on these rifles, scopes, and aftermarket options. The RPR and now the Tikka, it gives the layman a very real idea of what is possible and affordable. I don't have a lifetime of range time that you have, but I see whats achievable and your schooling videos are excellent. Down here in New Zealand quite a few bunnies and deer might not be so appreciative of the knowledge trickle down. Cheers Tom

[@jaycupples4362]

For factory barrels tikka and Sako make some of the best in my opinion.

[@BlatFlattery]

Wow! 'Much better than a Remington 700' that'll burn a few ears. I love my tikkas.

[@jpenna1976]

Truth hurts :)

[@daddyblxcklist9104]

I cannot wait to see this build. This is exactly what my next build was going to be. Burris XTR II as well. This is going to be phenomenal, thanks for doing this!

[@danarnek]

im excited about the next episode in this series. Best regards from Norway

[@TheBeard411]

Super excited to see how you progress w this build! Thanks!!!!

[@michaelekertisjr6740]

Looking forward to the next video ! Keep up the great work !

[@30retlawable]

I can't wait for the Upgrades video. Just order a T3 X in 308 and it should be here thurday. Already order a better recoil pad and a 20 MOA base.

[@Dirty_bird123]

I had a browning x-bolt in 300 win mag. Best thing I ever did was sell it and buy a tikka in the same caliber. Went to the range with the cheapest ammo I could find (Remington core-lokt) and shot half MOA out of the box very impressed!! got a moose hunt in September hopefully put the rifle to work.

[@jpenna1976]

Looking forward for Tikka T3X TAC A1. I have been shooting with T3 Varmint .308 for a long time and only minus side has been the original plastic 5 round magazine. T3x and CTR have already fixed this issue, but TAC A1 might be my next purchase.

[@blcouch]

Thanks for the vid and especially the series on upgrading the Tikka. I always liked the T3 but was too entrenched in the 'it has to be a 700 to be upgradable' mentality. Maybe have to look at them again after my M40A1 project is in the bag.

[@clintonscottwalsh]

I'm from Australia and alot my hunting buddies all own tikkas in the hunter light.. some in .223 and the .270.. they are a great rifle to shoot.

[@brianlee6849]

Wow! Tikka seem to be consistently awesome right out of the box. I'm interested to see what you gain from the upgrades? Are you also going to cover the cost of your upgrades? Tikka is very interesting to those of us that are on a budget . Thank you I look forward to seeing the rest of your videos.

[@Pat130789]

Which model of the T3X family is this one? Tac, Lite; CTR; Varmint..?

[@poulo69]

Great to see you guys finally doing a review on tikka rifles. In my opinion, you don't need to change out the barrel and trigger. It's not a Remington 😜 I've owned several tikka's and I shoot them in competition against custom built rifles and other factory rifles. I've never found it wanting I look forward to seeing your "up grades" and see if the improve it in any way.

[@macrocha5251]

I own "A" Tikka that I hunt with and I use to own another 2 that I varmint(223) and a LR Target(Super varmint 7mm R M) and I live all of them on its standard configurations. I didn't have the money to do all the upgrades I wish so I sold my LR rifle and bought a RPR in 6.5CM. My opinion is, they are 2 different "beasts" out of the box and if you want to compare "rifle x rifle" I think the Ruger Predator Rifle is the one to compare with the tikka. However I understand all the "customisation" of any rifle I also like to see what will happen if keep the original barrel as they are great too.

[@NITEOWL22LR]

when is episode 2 out?

[@ihunt_]

I'm dying to see how the prime 260 ammo shot in this gun with no mods...hurry up already well ya! lol... Will follow this video series with great interest...I own 8 T3 rifles, some slightly modified but mostly stock...they are by far the the best factory rifle you can buy for the price...I out shoot many guys at my range shooting guns that cost 10x as much... I change to a steel lug (which is now factory on all T3x guns) and fully float the barrels in the factory stock and if they shoot well I leave it at that. Hand loading really brings out the accuracy in these guns. Will be very interesting to see how the modified gun you have planned shoots compared to out of the box,...I think everyone will be surprised how well the factory gun will perform.

[@raider6511]

You did a review on the Ruger Precision rifle how about one on the Mossberg MVP-LC in 7.62X51 (308) and if it would be difficult or a good idea to change out the barrel to 6.5 Creedmore.

[@Kman31ca]

My T3 270wsm is a sub 1/2 min gun out of the box. Paid 750$ can for it... Besides upgrading the recoil pad I honestly don't wanna mess with anything. Best shooting gun I've ever owned. Plus I'm primarily a hunter. Those Souther Alberta deer better watch out this November. Lol. Amazing rifles.

[@SHLowlight]

It's not my first rodeo, I know when to change a barrel, and not too... This one will have at least 1000 rounds through it before i change. It's only a 20" which is a great handy rifle but you leave a lot on the table with a 260. I have a 24" coming so there is really no reason to keep the factory barrel on it beyond 1000 rounds as a little longer is better

[@jaycupples4362]

I have a Ctr in 260 I'd agree with you the 20 in. Leaves some velocity on the table 140gr Berger's running like 2645fps. Enjoy the videos!

[@JEilish]

SHlowlight ....is the ruger precision in your opinion better the the tikka t3x both stock in 6.5 creedmoor

[@AV1776]

Which XTR II model is that? I just purchased a 24' 6.5 creedmoor CTR. I've been looking at the 3-15, 4-20, and 5-25. I'm hoping to take it out past 1200 yards at a long range rifle class. My local range goes out to 1200 yards so my most of my shooting will from there and in. Thanks for the review.

[@buzzmeistermeister280]

Do a review on the Tikka T3x Tac A1,,,, Pleazzzzzzze

[@simonsmith9363]

PSE Composites make wonderful stocks for Tikka's. By the by, I have nothing to do with PSE but really admire the work Edi does. I have been fortunate enough to use some and they are outstanding, they make a good rifle into an even better one!

[@MrOrijen]

Can't wait!

[@teambennett3060]

Frank...Can you please do the tikka ctr in 308? I'm here in Alaska and was talking to a gentleman that owns Wiggies, I believe your well acquainted with the long range course hes been putting on. I believe he was of the opinion I buy another caliber. However it's what I have to work with and it's time for a new barrel. I want to order at least a 24" left handed gain twist with 5R rifling. Do you have any recommendations for me? I'd like to run 178gr ammo.

[@josephward2753]

Lowlight, i was wondering now that you have done the tikka and the RPR. Given the new tikka tac a1. Which one would you chose, or rwcomend, for a PRS production class rifle? They are both so very close to each other.

[@K-bob_45]

First hunting rifle I bought was a t3 lite stainless. Pretty much 3/4 min with almost all hunting loads. FGMM was closer to half MOA. I'm not surprised by this rifle. Just wish it had a short action

[@EnterTheFenix]

Why would the action length matter to you? especially in a hunting rifle

[@K-bob_45]

EnterTheFenix It was just a pet peeve. It didn't affect performance I just didn't like it. I know they only produced one action length to cut cost.

[@michaelekertisjr6740]

Nice looking rifle ! A crossover , YOU have a competition rifle and for the guy that also loves too hunt . looking forward to the next video ! Awesome ! The price is nice . Just under 1000.00

[@Manbrown1]

WHAT WAS THE NAME OF THE CARBON BARREL REPLACEMENT?

[@WVArmory]

What magnification Burris XTR II are you running on the Tikka?

[@Countryguy5967]

I just bought a T3X Lite. I'm looking to get a new lower so I can use a better magazine, heavy barrel with a break, and maybe a stock

[@frankmiller95]

Gimme a break. lt's a "brake."

[@JEilish]

SHLowlight what is better in your opinion between the Ruger Precision and this tikka both in 6.5 creedmoor. Both guns would be stock no upgrades intill i get used to it. What is better in accuracy.

[@anastasioskeramianakis9870]

Does anyone know what model tikka t3x this is?

[@shootingnz1]

ctr

[@Manbrown1]

Would you recommend the Cadex chassis for the Ruger in 6.5 ?

[@minervius]

what I was preaching for some time now. the t3 is easily in the top3 best boltaction rifles every constructed if not the best. it makes new shooters look good ( like me on my first day ). I always got heat from the rem community :D the only thing I dont dig is the magazine its known to loose rounds if you aggressively insert your mags

[@Countryguy5967]

I just bought a T3X Lite 30.06. This is the one with the 22 inch barrel. I would like to have a 24 inch heavy barrel, really nice stock, muzzle break,and that's about it lol. I need to get a rail for my scope first XD I would like to find out where I can get these things. I don't really have any gun smith's or builders in my area. Any tips?

[@Douginont]

I know it's been 2 yrs but Mountain Tactical in MT has rails / bolts and coretacsolutions.com in Canada has a variety of accessories.

[@KeepItSimpleSailor]

If you change all that stuff, how’s it still a Tikka?

[@1986mrcrj]

I'm looking for one as a hunting rifle. With a 24 inch barrel. If it's doing that out of the box with factory ammo. Then I don't need to do anything to it.

[@DrMike040298]

Great review. One question- if this rifle shoots 1/4-1/3 moa out of the box, why upgrade? In other words how much better for all the $$$ spent do you expect it to shoot? 1/8moa?

[@SHLowlight]

Different stock, the plastic one is not that great, barrels burn out, why does it matter why "I" upgraded it, It's a great base platform, showing the ability to customize said great base platforms helps inform long term buying choices

[@DrMike040298]

SHLowlight thanks for the fast reply, it makes sense now. I have a savage10fvp-sr in 6.5cm that shoots 1/4-1/3 moa with my handloads which is about the limits of my shooting. I'm considering a stock swap to a hrs or McMillan because I like the palm swell/ pistol grip over the plastic accustock thanks again

[@SHLowlight]

sensitive aren't we, the OP got it, funny you are so offended.

[@derekkt49]

Why didn't you buy just a basic tikka and just keep the action?

[@thizzlemania91]

The Remington fans are gonna be pissed off now boy lol

[@pd5156]

Savage 10 or this? I have read tikka modification could be pain in the ass (rrail remove etc).

[@SHLowlight]

Tikka, the pain is the fact you need to add heat, is that really a Pain ? You warm it up and the loctite breaks free ... Savages are no where near the quality

[@UhhhWinski1]

savage is a nice beginner gun thatll just shoot damn accurate, tikka is one of those guns you just buy for yourself. the quality is far beyond its price range. i have yet to hold a tikka i cant chamber a round using one finger. the actions are butter.

[@breakingtoast2255]

shoot the power lines

[@tommymonroejr6769]

Replace the barrel the trigger the bolt the stock..... you no longer have a tikka you have a custom rifle. So really your not testing a tikka your testing a custom rifle.

[@SHLowlight]

One day you guys will get a clue, that I am demonstrating what options are available, and how a person can buy an entry level system and not be stuck with it. That you can indeed upgrade it over time. The fact I have resources and can change everything at once is not the point, the point is you can make a factory rifle better without having to start off with a full custom build. Your myopic view of the world is entertaining but what we are doing is clearly over your head.

[@shootmcrunfast]

Yeah, just gonna ignore everything you say after that self indulgent bullshit. Get over yourself lover.

[@rogerpemberton79]

I have done the same thing with a Savage model 10 FCP HS Precision. Stripped the stock, barrel, barrel nut, recoil lug, and accu trigger off and sold them. Then went through and put an XLR chassis with folding stock, Rifle Basics 14oz-3lbs adjustable trigger, Criterion varmint contour 26" stainless barrel (which is now 24" and threaded muzzle), and North Land Shooter Supply barrel nut and recoil lug back on it. I totally understand what is being demonstrated in the video. You can buy something that works for you initially to get started and grow into something more as you can afford it. I've put together several AR-15's in 5.56 and 6.5 Grendel and one LR-308 over the past several years. Now I'm looking at what I want to put together for another bolt action rifle. Different strokes for different folks is what it comes down to.

[@mattmcgee8505]

factory threaded 20"?

[@SHLowlight]

Matt McGee for now yes

[@mattmcgee8505]

SHLowlight off topic, I know. sry but have you done any videos or write ups on proper prone positions? I was unaware at first the rifle chose was a CTR, when I saw the t3x title I assumed it was a standard Sporter. CTR makes sense.

[@ejcamden]

In other words, “we’re gonna take everything off this Tikka and make it something else”

[@SHLowlight]

Right.... cause no one builds off anything but custom actions. Your lack of imagination is on you

[@ejcamden]

Ah, I see now...I thought you were reviewing the tikka, but I see now the title included that it was a project!

[@jeffrobinson7049]

As Sharer would say, "Ain't nothing but time and money."

[@Mexicannasa]

No mention of that sexy smooth bolt.

[@EnterTheFenix]

Looks like hes got the CTR model, if its straight out of the box the bolts arent that smooth because of the coating... still smoother than anything else, but after a few hundred cycles it'll be like glass

[@EmanP223]

I wish they'd chamber a hunting rifle in 6.5CM.

[@grappolidipalma]

They have it on some models (heavy barrel ones)

[@Strelnikov10]

Spoke too soon... they are everywhere now.

[@frankmiller95]

lt seems pretty good as is. Why bother?

[@terrymeaden3695]

Let's face it, you trough away the tikka and replaced it with after market. On that gun what is tikka???

[@jamesmoore1124]

tikka t3 lite 270 wsm.

[@I5ZQ8]

Still prefer my Ruger precision in 308....half MOA out of the box with factory Hornady AMAX

[@chipaltman2709]

WTF is the only thang Tikka gone be the action

[@SHLowlight]

Chip Altman WTF you’re dumb

[@alexgeislinger6021]

how bout instead of making an initial investment in a gun and replacing every single piece of it, you pick parts from other guns that have traits that you like and make a completely custom gun. without wasting 7 or 800 dollars. I mean at the end of the project you can't even say the gun is a tikka. thats like buying a car then switching oit every part then at the end throw the badging from the original and saying thats what it is. just dont understand

[@alexgeislinger6021]

in my opinion the barrel and stock are like the engine and chassis of a car as long as one stays you may call it what came from the factory as.

[@SHLowlight]

How about do your own video... you don't understand the point and I am not gonna explain it to you

[@xiong2moua]

Not sure why people would buy a rifle than tear it down to make another. Guess they have too much money. I would just start with a full custom one off for all that time and money.

[@newalbion1497]

Seriously ! What the hell is the point if your gona change the stock, the barrel and the trigger etc ITS NO LONGER THE SAME RIFLE !!! Of course it's going to shoot completely different. Why buy a gun only to change into a completely different gun ? You might as well have bought two different rifles. What the hell is the point ????????

[@SHLowlight]

You're an idiot with no imagination and no understanding of how people work. Why do people buy 700s only to change everything, this is demonstration of what you CAN DO and not what you HAVE TO

[@tevinmarchable]

I could see upgrading a stock or even a trigger, but once you swap the barrel you pretty much have a custom rig built on a Tikka action, not an upgraded Tikka. Most of you Remington fan boys have to upgrade your rifles to shoot what a Tikka does out of the box. I'm starting to think it's just a fad nowadays to waste money, if it isnt broke dont fix it!

[@SHLowlight]

Please tell me what someone does when they get a caliber that needs a new barrel around 3000 rounds like a 260 or 6.5, how about showing them you can easily swap the barrel, here is a second clue, I don't pay retail. and with a barrel speed matters, if it's a 150fps slower than necessary because Tikka factory barrels are slow, why not swap it. I get Accuracy International Rifles in 308 and then change the barrel and caliber to something else too.

[@tevinmarchable]

SHLowlight Tikka barrels aren't slow, they're a 1:8 twist. 1:7.5 I believe in the Varmint. I bought a Tikka varmint in 6.5x55. Had a 24" heavy barrel and an adjustable trigger. Broke clean at 2.2 pounds and with my handloads was able to achieve .5 of an inch and under @100 6.5x55 or even the 6.5 CM aren't barrel burners unless you're really packing those loads. My Swede shot .8 of an inch with factory federal blue box factory ammo. It would be cheaper to build a custom gun than to buy everything you did ontop of another tikka rifle that supplies literally only the action...

[@SHLowlight]

Tevin March muzzle wise not twist rate I want speed in terms of MV

[@tevinmarchable]

SHLowlight 6.5 creedmore is a short action cartridge, 20" ctr barrel should be more than adequate enough to reach 2800+ MV I stand by what I said, you essentially built a custom rig with a tikka action.

[@SHLowlight]

Tevin March not even close it’s 175fps slower than the replacement

[@yuriys.6352]

That's funny to buy a new rifle and to change the barrel....😬

[@twodogs2009]

What? Didn't even show the groups. How can we compare. Very poor presentation.

[@chipaltman2709]

Why f??? Up a good gun just build a custom gun if your gone go thru the "up grades"....wow

[@SHLowlight]

Chip Altman maybe get a clue, the factory stock sucks, barrels need replacement at some point and right now upgraded this rifle is one of my favorites - your ignorance is not my problem.

[@markemert6902]

This is a ridiculous video. You are going to totally create a new rifle as opposed to upgrading a Tikka, which is a perfectly fine rifle to begin with.

[@str3tchr]

Mark Emert there are people that buy rifles say cool its good and call it a day... but those people are not usually the ones on snipershide. There is something about customizing a rifle to be exactly what you want that is just unbeateable. This kind of series shows people tikkas are a good platform to do that on. I think I may build my next rifle from a Tikka instead of a custom action.