SNOW PERFORMANCE METHANOL INJECTION STAGE 2.5 INSTALL

[@MrCaribe65]

I use Meth on my Mustang. Major help making power on pump gas, without an intercooler. Great work, and all under a shelter. I did that sort of thing for decades.

[@Garageless]

Yea i gotta bump up my nozzle size again i believe once its back together

[@Donsguncorner]

Just served you guys at Wendy's, great channel. Like the builds, keep it up!

[@Garageless]

Lmfao enjoy... join fb group too we have cookout week before automotion

[@0thers1d3]

Dude, where in Wisconsin? I know this is an old video, but I'm in New London and just bought my kit. Any tips you can give me?!

[@ricardoastorgacardenas1267]

Hello greetings from La Paz Bolivia I have a doubt my vehicle is a subaru impreza wrx with an ej20 turbo engine, it has the oem intercooler where I would have to place the nozzle, thank you very good your video.

[@Garageless]

Near throttle body is best i believe... l

[@christianconnolly1134]

My kits on order so I don’t have the pieces or instructions in front of me. Heard some other people say that the line from tank to pump should be no longer than 2 feet. I assume because it’s gravity fed and the pump has to be lower so the shorter the line the less likelihood of issues but just wondering if you had any problems with drawing fluid from the tank

[@Garageless]

I had no issues of that sort... just gotta make sure pump is below tank essentially

[@CorradoRacer]

where did u get that plastic seal/washer for silicone 90deg...the one that the nozzle will screw in...my kit doesn't have that and im afraid I can't mount mine without it otherwise it will leak

[@Garageless]

Was off ebay

[@RearEngineShop]

Pretty sure I’m running #3 on my 2.0 turbo swap in my Fiero.

[@Garageless]

Same as me then... will see how that goes may go to the 5 or order the 4

[@Mark2ube]

The SnowPerformance pump is rated at 300 psi, not 200 like the others. Also, when you sprayed water through the jet, there was a bit of leaking from somewhere. Was the jet bad, or maybe just the connection?

[@Garageless]

It was the nozzle there was no sealent on threads as it was just a test

[@Mark2ube]

Good deal. BTW, the reason for me mentioning the pump psi is because there was some talk starting at 16:00 wondering why the jets for 3 systems are different when the pumps are all the same, and asking folks to comment on why. But Snows is rated for 50% more pressure.

[@Garageless]

@@Mark2ube yea we found that same info later on... different companies test at different levels basically... kinda dumb but is wat it is

[@ebperformance8436]

I’m doing a turbo and transmission install for the turbo will I need bigger injectors? I’m gonna upgrade the Rockers I Already have zzp intercooler should I do another Intercooler? I want to do a sequential setup smaller Mounted to crossover and a bigger one mounted on the exhaust manifold opening. I don’t want to lose the torc the supercharger makes. This is why I’m doing two Turbos one for low end one for high end Or maybe 50 shot of nos for launch instead of the smaller turbo I’m ditching the supercharger

[@Garageless]

Turbo will not have same torque as a supercharger just not possible really... 60mm turbo is basically perfect for streeting around... u dont want that torque anyways saves the transmission a little

[@Garageless]

Ull prob need atleast 60# injectors depends on what power u want really

[@kostas4854]

Would the solenoid go b4 or after the pump?

[@Garageless]

After

[@lsxtmt4910]

You didnt use my meathod of testing the pump on Paul,disappointed...

[@Garageless]

Lmfao

[@maxmarshal2482]

Anyone knows someone in philly area who can do this ?

[@Garageless]

Im from Wisconsin so not much help for ya on that one

[@minimanadam]

Heyyyyyyyy I'm in Wisconsin too buddy ! Check out my build.....

[@Garageless]

🤟🤟

[@dikdawg3438]

Dude crying about 30 bucks. 🤣

[@Garageless]

I went e85 much easier lol since i finally got e85 gas station in my city