Water/Methanol Injector Design BREAKTHROUGH!

[@seacradev5400]

Received my kit last week, your dead on the packaging. Every part was well protected. The V3 spray pattern is top notch, and a kit that was simple for my tuner to apply it's benefit to my Taurus SHO. Don't let all the wiring spook any of you potential buyers. It really was designed to be stupid proof. And the kit did provide all I needed. My only mod i did was go to a brass T for boost. The T that comes with the kit is a very small and plastic. Other than that I rate this kit a 10.

[@DavidVizard]

Great video. Much of what you are saying has been confirmed by tests done for a Chrysler engine development program. A KZbin video was done on this (PowerTec 10, episode 95) which talked about achieving octane levels as high as 250!

[@jarlev80]

Excellent data, thanks a lot! There are several vendors out there but very limited amount of testing, proving performance and results.

[@tonylyons2414]

I’m about to buy this for my big build I’m doing

[@TheAnonymous1one]

This guy is well spoken and demonstrates the product well. 👍

[@alloutofdonuts3998]

Looks like I gotta get me a v3 nozzle kit!! Great vid 👍

[@PontiacSpazz]

Definitely have a sale from me. Video was very in depth

[@AmRFuKYaH]

Is AEM going to consider selling rebuild kits for these nozzles to replace fragile and wearable components inside the nozzle such as the e EPDM o-ring or the check valve?

[@spdcrzy]

Computational fluid dynamics engineers are crazy, man. This shit is so cool!

[@RGHTBrainDesignDrive]

Great job boys!

[@marklinley815]

Thank you for the great video!!!

[@JDMWork]

The attention to detail is great, I honestly was going to go with a snow system but this changed my mind completely. I guess my only question is do you guys offer anything like a 5 gallon reserve?

[@JasperSkallow]

what is a snow system?

[@410kane]

I have a 5 gallon aem reserve tank. It's overkill for my application. I fill mine about halfway

[@BJ-Hunter513]

I have to get this setup for my Silvia

[@eurodj101]

have a v1 kit in my s15 love it just ordered v3 nozzle!!

[@geoffreym2769]

In New Zealand we no longer have E85 so looking into water meth a bit more, I've only set one system up via a Link G4+ ecu and have become a bit of a convert. I'm looking to setup a system on all three of my cars Honda K24A and BMW135I and my JZA80 supra

[@sircefiro]

How did you go?

[@resuwrecked]

I wonder what the actual charge air temperature drop difference is with the v3 nozzle. The 6.5s quicker temp drop means the charge air was cold enough to drop the temp of the thermocouple itself that much faster. I imagine that using an IAT sensor would react quicker and show the temperature drop more accurately.

[@HondaFit4Adventure]

I'm going to have to try this out for showering purposes...

[@AEMpowerTVelectronics]

lol

[@markhingst5368]

Hellllll yeahhhh brother, making a good product better.

[@sircefiro]

Great vid, sounds like only need a single nozzle in most applications now? Any thoughts or kit for direct port?

[@robertnunez8722]

Hey really awesome this kit, im looking for something like this for a mechanical DT466 Diesel engine which im planning to compound turbo, anything that can work with that kind of setup?

[@dcd2060]

Watched this video a few times to see fogger assembly and can’t get my wire hold down to go back in 😏

[@socalcasedog]

wounder how this would work on a turbo rzr with the liquid intercooler .....🤔🤔🤔🤔

[@chir0pter]

Do you still recommend running lines into each intake runner for best results? Or does the new valve make this superfluous?

[@patonbike]

Stupid question, but does the temp of the injection fluid matter much? If you were to inject say 32F water/meth would it make a difference?

[@eurodj101]

My car is tuned with a 500cc v2 nozzle on a V1 kit , i use it on track days ,use to keep things cool and tiddy, idont need it sinceiuse 100oct but i do like the cooling benefits it brings....if i use the 500c on the older nozzle should i stick with 500c on the v3 or switch to 250cc to avoid it getting to rich on the mixture????

[@AEMpowerTVelectronics]

I would start with the 500cc and keep an eye on your AFRs making the necessary adjustments to the controller settings if you need to reduce the flow level.

[@ShaddyDaBoss]

Can I run this water meth kit as a substitute for an intercooler to bring charged air intake temperatures down?

[@AEMpowerTVelectronics]

Yes, the system can be used in non-intercooled setups, however for best results we recommend pairing the WMI with an intercooler when space allows.

[@ChrisPink-dx8rw]

I have recently upgraded to the v3 500cc nozzle from the v2, I also have a flow gauge in the circuit which the V3 500cc is reaching 1000cc on the gauge is there a reason for this?

[@lukedennehy6540]

Hi quick question ,just got my aem kit does the rear of your nozzle bit that connects to nylon hose have any play in it ,mine seems to spin slightly ...thanks

[@ovalwingnut]

Love the kit. Very COoL hardware. Q. Is that 50/50 by weight or volume? Actually, both ratios are still flammable. You need

[@AngryHerby]

Can I use this on a burnout car instead of running my engine on M1 to keep it cool. I have issues with over heating and was told to switch to meth

[@ПавелДанилов-в6б]

please tell me at what angle you need to install the aem nozzle?

[@christos8189]

Will the nozzle work for a pump that puts out 140PSI? I am building a budget kit and I believe this nozzle design is really advanced against competitor nozzles. I am wondering if the atomization will suffer or will it still function as intended. Thank you

[@AEMpowerTVelectronics]

Yes, the atomization will suffer at lower pressures, however it likely will still surpass the pattern of other nozzles on the market. For best results I recommend the AEM 200psi Water methanol Pump.

[@kylejohn486]

When and where can I get the new v3 version, I'm in New Zealand, and they only have old stock . Do you sell direct to customer, with frieght

[@AEMpowerTVelectronics]

Please give our sales team an email at [e-mail] so we can connect you with a dealer, the v3 nozzles have shipped with all of the v2 water methanol kits since July 2020. www.aemelectronics.com/dealer/find-a-dealer

[@dhuertas111]

Do you have a 90° push fitting for the v3?

[@AEMpowerTVelectronics]

No, unfortunately we do not have 90* fittings

[@volkshandel]

Hi what will happen if used on an Diesel?

[@nasimhaider281]

Can this kit be used with stock factory ECU ? I just want to spray water/Meth on my JDM H22A motor as an alternative to improve our poor fuel RON without the trouble of buying aftermarket ECU, TUNING and all .. My OBD2B motor mostly runs retard due to crappy fuel.

[@mcgmhp7290]

Hi what is the set system pressure 200psi or adjustable

[@AEMpowerTVelectronics]

The system pressure is fixed.

[@trialbyturbo9106]

How many cc/min can a single pump support?

[@pvblito]

Is your controller able to connect to a JB4 for integration control and mapping?

[@AEMpowerTVelectronics]

That would be a good question for the guys at Burger Tuning, we're not sure what inputs or capability their JB4 systems have.

[@davidgolden6068]

If coupled with a tuner module on a Cummins 5.9, would this help daily driving, non-towing MPG at all?

[@AEMpowerTVelectronics]

The WMI kit is a race part and not legal for street use.

[@mattk252]

Huge gain in mpg

[@davidgolden6068]

@@AEMpowerTVelectronics sorry, what I meant to ask was if I'm doing a 24hr LeMans with a Cummins 5.9, what kind of percentage mpg gains could I expect?

[@jerryismybff]

16:11 has a serious issue that invalidates the conclusions made about 6.5 seconds faster cooling time. The V2 was not flowing water at the beginning of the test. Looking at the bottom data plot, the "Water Flow" graph clearly shows that the flow rate for the V2 nozzle drops to zero and then build pressure again which takes about 2-3 seconds. Furthermore, the "Solenoid Trigger" graph clearly shows the solenoid close during this period. This time discrepancy accounts for most of the shift seen in the top temperature plots. You can even see that the "Pre Nozzle" plot for the V2 system is shifted right as well.

[@sffabrications3872]

Curious if this nozzle could be run 100% meth and with a constant mechanical fuel pump. Our class doesn’t allow any electronics other than a magneto in an endurance car.

[@scjohns7638]

Produit vraiment bas de gamme. Que des problèmes ! Je ne conseille vraiment pas ce Produit ! A bannir !

[@jselectronics8215]

Great demo.