So Ya Bought A New Machine

[@chuckinwyoming8526]

Thanks Keith, I got my first mill, a 1942 K&T 2HL PLAIN when I was in high school. It needed a LOT more work to get running but I only paid 6 cents a pound for it. Has been a great machine for over 40 years now...

[@TheKnacklersWorkshop]

Hello Keith, Good to see you back on our screens… I hope you are well… This was an interesting video, hopefully see you again soon. Take care. Paul,,

[@timthetoolman223]

We're just all glad you're back and feeling better Keith.

[@elsdp-4560]

THANK YOU...for sharing. Well worth $700.00.

[@silverbullet7434]

Looks like gold to me . She's in really good shape . I used one like it many years ago . See we can build things to last for more then 5 years.

[@liamlevins6570]

Great to see Keith back and shooting jizm all over his new machine,

[@member5488]

Well bought. Glad to see a usable machine so low priced. I'm 46 and have ran a fence construction company my father founded in 1980 for the last 20 years. Due to a rare tick born infection called Tularemia, my physical strength and stamina was permanently impacted. Having watched Keith from almost the start of his channel, it helped me decide to move into another career and I am signed up to learn machine technology this fall. I hope that with my already advanced mechanical, electrical and welding skills that I can transition my business into a job shop where my brains are more important than my brawn.

[@lisaburnett3368]

Good to see you back in shop again Keith.

[@simperous4308]

Great to know you’re well!

[@richardhebert6185]

So glad you're feeling better Mr. Fenner... Take care of yourself!!!

[@garthbutton699]

Thanks for the video I have always liked old machinery🤗🤗🤗

[@davidmexicotte9862]

Glad you are back!

[@frankward709]

Thank you for saving another old machine down here they wanted small for in Washington Oregon

[@sharkrivermachine]

Looks like you have a winner. Thanks for sharing.

[@lynnharrymitchell6570]

Good to have you back

[@dozer1642]

I’m glad you are back my friend. We are almost halfway through 2021 and I’m still trying to forget 2020.

[@waynepollard6879]

I'd like to see you rebuild and paint that machine. Great buy !

[@slawnski]

Great to see you back! Nice mill. Thanks for the video!

[@TheAyrCaveShop]

Wow what an awesome find...good to see no major issues. very well worth the cost, my luck usually runs the other way. Sure would be nice if you have the time to give the old girl a full clean-up and keep it in the shop.. Could be handy having two different setups...just saying ATB...Dean

[@roydawson4882]

Looks like $700 well spent there Keith, stay safe

[@larryernst6349]

So nice to see u back Keith, no need to apologize, we all have life things to deal with

[@kentuckytrapper780]

I've got the model k 2 universal, love it. Made to eat metal. Glad to see you in the shop. Get'er done.

[@50shadesofrust65]

Got one too but mine is a WAR FINISH.

[@kentuckytrapper780]

@@50shadesofrust65 so is mine, ser# 44-5000.

[@MrKingdavis13]

Glad to see you got your head cleared up and everything. I wish I had the opportunity to buy a piece of equipment like that for my garage but I don't have three phase power and ANY machine within a day drive of my garage would have an extra 0 on the price and would be in far worse shape. It kinda makes me sick to see warehouses full of equipment just sitting there for years and years because they want $10,000 for a 50 year old piece of equipment they they picked up for scrap price a couple decades ago. But such is life.

[@toolbox-gua]

No worries as long as You are well. Nice piece of equipment and it is runnjng!

[@peteengard9966]

That was a great deal. A little work and some common wear parts you have a great mill. The table isn't all chewed up.

[@ruperthartop7202]

Great video Keith. Many thanks for sharing

[@bryans5150]

Missed ya Keith! Soo sad we don't have SMELL A VISION yet! Hard to describe the lovely bouquet of old machinery lubricants. Thanks again Sir.

[@thomasewing2656]

Think 90 weight oil smells bad? EEWWWW!

[@Laura-wc5xt]

Keith, really enjoyed this video, it has been awhile since I have visited your channel......great to see you are doing ok, your faithful viewer in Orlando, Paul....cheers.....the Clausing looks great with the new coat of paint....

[@staciedziedzic8706]

Hi it’s Stacie! I am happy to see you! You know what? Life does get in the way sometimes and you have to deal with it and move on! I was a little worried because I didn’t see you but obviously you posted a video so that makes me smile! Take care!😍

[@patrickcolahan7499]

Glad to see you back. Nice Mill. If that was on the West Coast, covered in thick rust, motor barely able to turn, handles missing, oil full of gunk, it would still be selling for a couple of thousand. I am jealous.

[@CraigLYoung]

Thanks for sharing!

[@58unclesam]

Glad to know your running on all cylinders again!

[@robertdebusk6157]

Very much enjoyed the startup and checkout video. I have never gotten lucky enough to pick up a decent machine for such a reasonable price. You did very good. Take Care and Stay Safe. Bob

[@TrPrecisionMachining]

very good machine mr fenner..thanks for your time

[@FOOKYOUTUBENUMBERS]

Nice to see You back. Hope yeah over the hurdle Life throws Yeah! had full row of them lately Myself. Chin up Bud...

[@Dmenbiker]

Keith is back in action !!!! Nice machine....

[@walterjoncas12]

Thanks. You are looking well. I enjoyed the video.

[@bradalms6753]

It would be good to see you restore this machine. Then use it, or market it. I like to put stuff back to new or, see stuff put back to new, that's just me. I'm glad to see you back.

[@erichoff7926]

Wonderful machine for a great machinist!

[@jamesfuller8864]

Nice to have new content again. Hope all is well for you. Great video once again.

[@edcallahan6952]

Thanks for the fast reply it looks like it is number 6 of 50 made in feb or 1946 I also have a 2h plain I think it is from 46 and it has the one shot oiler on the table and the spring loaded dials thanks again ed

[@lfowkes11]

My employer has a plant full of expensive CNC turning centers and vertical machining centers but we still have two of those same Kearny and Trecker mills that we use quite often. They are bullet proof and are often the best way to do certain operations. $700 was a steal!!

[@bazmcc310]

Great to see you back Keith. Can't wait to see the next update on it.

[@gabewhisen3446]

Good to see ya Keith cool machine

[@ianrobinson509]

Glad to see you back and feeling more positive.

[@fastst1]

Excellent fixing there!! I had a motorcycle with plastic sight lenses for the brake/clutch fluid, I ended up finding borosilicate lab glass lenses in the exact size, what a joy compared to old plastic and better than the new plastic ones. crystal clear and tough. Great to see another video from you Keith!!

[@ghl3488]

Glad to see you back Keith. That looks a really good pick up there, will be interesting to see its progress. Thanks for sharing. Regards from Wales

[@1pcfred]

Keith knows how to talk to those old girls. Just tell them about the scrap yard across the street and they behave then.

[@georgeswindolljr1980]

Woooooooohooooo!!!!! Thanks for sharing this on KZbin!!!!

[@dizzolve]

Understand Life gets in the way sometimes . no problem ......... but I really miss my Fenner videos........ welcome back

[@jeffflanagan2814]

Very Nice buy Keith!

[@a-yates]

Everyone needs and deserves a break from time to time you would be hard pressed to find someone who doesn't take time for themselves glad your back tho keep yourself sane!

[@Wingnut_Stickman]

Traffic going by is freaking me out.

[@bobonit9381]

Missed ya buddy was wondering what happened to your videos hope things are better for ya keep up the great work

[@phillipjones3342]

So great to see you’re doing good and back at it get her done Keith

[@dougbourdo2589]

Great find.

[@tomroskell403]

Very interesting Kieth, please continue servicing this mill , I own a 1h K+T symular but different

[@roncar1565]

Glad your back, always enjoy your presentations.

[@jacain1234]

I thought I was subscribed to your channel and was wondering why I hadn't seen any of your videos pop up in my feed. I got everything straight now. Glad to see you are back in action. I'm going through the same process on a 3K plain. Looking forward to your progress.

[@geckoproductions4128]

Glad to see you you out, Keithy

[@swanvalleymachineshop]

Looks like a good buy . I think i remember you did a stem repair on the other mill quite a while back . Cheers .

[@nuisanceneighbour]

Great to see you back, looks like you got a rough diamond right there. All the best

[@1995jug]

Glad to see you back don't worry about not making videos everyone knows you got some things to clean up

[@carlmic7]

What great timing! I just started in a shop with one of those!

[@brucelott3583]

I just recently picked up a 60's Clausing 14" lathe and tomorrow I'm going to pick up a mill. I've wanted a mill for some time but couldn't justify it until recently. The lathe was a project but the mill is going to be able to hit the floor running. Good machines are kind of hard to find at a decent price here in Florida.

[@millomweb]

25:00 I like the way you're about to engage the spindle drive but before you do that, you take the spindle out of shot.

[@mobiousenigma]

hey fenner! good to see ya uploading and double bonus a new machine to disassemble and inspect...clean refurbish and put back to use. many of the creators i watch have been talking about work/projects and not showing it which has left me wanting new engineering to explore. as always thanks for the vids

[@larryblount3358]

That is a special friend to find you a great machine.

[@peterparsons3297]

Good to see you back Keith, hope everything is ok with you and yours.... stay safe

[@georgestone1282]

Good to see you again, nothing else like older machines. They work! Indiana George

[@phlodel]

Glad to see you back, Keith.

[@jdavidkatz]

I'm glad to see you back, Keith. You're the best machinist on KZbin.

[@ronalddavis]

hell hes about the only machinist on you tube the others run cooking channels

[@garybrenner6236]

@@ronalddavis And, the "Travel Channel"!

[@jesperdahl1486]

@@garybrenner6236 Nobody are forcing to watch the travel channel, that is a totally separate channel.

[@ronalddavis]

@@jesperdahl1486 whoosh

[@jongerber3476]

McMaster Carr used to have a lot of those sight glass replacement components.

[@joee8417]

Glad to see you have the Knipex. I bought 4 different sizes, there great

[@LarryDoolittle]

I so miss your equipment videos. Nice one!

[@normansandds757]

Look's like you got a keeper there

[@boaterbil]

Nice to see you Keith. Be happy

[@frankward709]

Good to have you back, I got the money and like to have one in my shop the regular or the heavy Call completely through it and rebuild it Emily me a fun project

[@markramsell454]

The scrapyard sounds convenient, that's handy.

[@Smallathe]

Very cool video. Fascinating and informative. A lovely old machine... :)

[@donmittlestaedt1117]

Thank you. I enjoyed that.

[@jeffryblackmon4846]

You're return is very much appreciated. Thanks for the fine video. BTW- please activate the CC function. Thank you.

[@24vignettes94]

I have a couple hundred cutters that I ended up with from an auction. Everything from thin cutters to ~6” spiral. Most still have plastic on them (I assume from having been sharpened). I believe all of them are American made HSS. I thought maybe someone watching this may have a need since they’re just taking up space in my garage currently.

[@mrfarmall-vk4gw]

Looks like a win to me, nice job!

[@C99631]

Very happy to see you come back Keith. Love your content. Life is kicking a lot of us in the nuts these days, it's how we deal with it that matters.

[@robertkutz]

looking good.

[@ScottandTera]

Awesome score. I need a latge for my shop

[@donaldnaymon3270]

Great video. Nice find on mill. Everything works. Nice to see your post. Thank you for sharing.

[@ozz5350]

Nice piece of machinery thank you👍👏👏👏

[@Sctronic209]

Good seeing you.

[@ww321]

That's just like mine. That's funny I was trying to figure out what oil to use and ended up using hydraulic oil. My 2H Plain was outside forever and badly rusted. Thanks for the videos you do. We really appreciate it.

[@ELBigYuyo]

Keith, is nice to see you!

[@PhilG999]

From my time in the Industrial Equipment industry ( I did mechanical power transmission, hydraulics and pneumatics and pretty much everything else) we always tried to sell the customer matched v-belts or two ,three, four + "multi V belts". Like 4 "D" belts in one. Wasn't much more expensive and it was a "fix it once and you're done". So many just got random belts of the "same" size but not matched and bitched that they didn't run the same. Um. "That match number on the belt is there for a reason".

[@nowayjerk8064]

great back up . its good to see ya :)

[@davidhamilton7628]

Nice investment 👌

[@firstmkb]

Enjoyed watching this, Keith.

[@mylifeisdope916]

very interesting! thanks for the video

[@johnwarkentinnikiskialaska8364]

Great machine

[@cavemansmancave9025]

In search of the lost screw. Been on that safari many times. 😁 I get to fix my Browne and Sharp. Some gawdaweful noise in the gearbox. 😕 Thanks for the video John

[@rwilson1125]

Eversource is soooooo quick. Hope you get 3-phase soon.