So you want a cheap turbo for QR25 specv or Altima. What you need!

[@jeremiahoutlaw7327]

Firstly the qr used in spec vs hate turbos so first step is to pull it and replace it using a qr from a 07 to 12 frontier swapping everything from spec engine to frontier block ....internals are all forged but compression is dropped to 9:6 to 1 and then sorce the trans from the altima 6 speed ....swap limited slip from spec trans now you have longer gears forged internals and an engine that responds well to boost...I've done this entire swap and trust me you will be very happy running this stronger more reliable setup ....if you want to get cute you can also use the spec cams ...also a direct swap

[@carlostabera1474]

How much boost ?

[@MrAuto727]

No matter what you do to the QR..the SR will always be better.

[@heruhadianmudjenan7126]

It Will be cheap...

[@mychalpstanton9188]

Gave me idea to turbo my frontier thanks for the info

[@SiCaRiI_DaGgEr]

Good stuff Ed, that will def help some ppl out.

[@JDRRIDETECH]

Much Love for this simple to understand well explained rundown on a self built turbo kit for the QR25de. Ive got a 2003 cloud white spec v that needs some love turbo kit wise when my health allows was thinking of going with the 2j racing kit but you've inspired me to DIY all of it besides driving it down to 2j in Georgia for a propper dyno tune or here in RACECOUNTRY USA aka the Charlotte NC metro area weve got shop options and alot of them as well as in hickory NC the used car meka of the area has some good JDM only shops for tuning CHEERS MAN will post some vids once i start the spec v going.

[@josias.qr25]

How much boost are you running and are you on stock internals? Would 5-7 PSI be good for stock internals and run reliably?

[@red_rabbit_specv]

Depends on the tune. I am set at 10psi but did a couple runs at 15psi by accident and didn’t blow up.

[@tyronejenkins855]

eBay has a Qr25de turbo kit for 700

[@williambergstedt4039]

quick question, could you link or provide more detail on the lip you used? it looks so much better than whats normally offered. i know its an STI lip, but do you remember the brand/ year you picked? thanks in advance!

[@red_rabbit_specv]

Answer and link is in this video description. I also show a clip in the video where I had to cut. kzbin.info/www/bejne/iZDYmKSYrZWmepI

[@williambergstedt4039]

@@red_rabbit_specv thank you and aloha brother, I really appreciate your quick response. if I still lived on Oahu id love to have seen your car in person. clean sentra!

[@makaveli2144]

Can you do one on a VQ35DE Altima 3.5

[@red_rabbit_specv]

To be honest because I haven’t done a turbo setup on a VQ I don’t know all the nuances that platform may have that’s different then the qr25. I really don’t want to make a video that could have any incorrect information. Many of the same parts should carry over. The exception would be the exhaust manifold, thermostat, and probably a few other small things.

[@makaveli2144]

@@red_rabbit_specv I understand 😔

[@M5LICE]

Whats a good intake mani fold because i was gon get the hi power intake mani full kit but 2j stop selling them is there a way to get a good list on making that kit…

[@red_rabbit_specv]

@@M5LICE I need to make a video on choosing the right manifold for your build. The oem manifold isn’t that bad for most cases. B16 is good if your doing a high rev build, rogue manifold is good for turbo setups. Having the original dual runner is nice for a daily driven car. It does everything okay where the others are great for a particular purpose. So for example, of B16 manifold as the best power output at 7400 RPMs approximately. If you’re not up to that your car could actually be slower then going with a dual runner that will give you decent low and power and top end instead of giving you one or the other.

[@M5LICE]

What are best part sites for basic need specially for power steering

[@red_rabbit_specv]

For replacement parts I typically go to www.nissanpartsdeal.com first. If they don’t have the part or too expensive then I typically just copy and paste the part number to eBay and google.

[@kashgaming8906]

do you know where to get a tune for the 2.5 altima most tuners in new york say they cant or dont know how to tune the QR platforms only VQs ect.

[@red_rabbit_specv]

Talk to Bobby Haskell (aka Hot sauce tune).. He does all Nissans but is most well known for tuning the qr25. He has tuned 100s of them including mine. his tunes are safe but still aggressive and the attention to detail in the drivability in the tune is something you won't find. He does alot more then just adjust the wrongly defined timing tables in uprev. I do have a couple videos on uprev that might be worth watching if your not familiar with it. facebook.com/bobby.haskell.1

[@bibobarron8789]

I have a 07 2.5 qr25de, is the motor the same spec-v? And who could do a remote tune (im from cali) to remove the speed limiter lol

[@red_rabbit_specv]

@@bibobarron8789 go on any of the Sentra groups and look for Bobby Haskel. 07 b16 uses the 2nd gen qr25. Similar but not exactly the same.. 2nd gen is a better engine.

[@bibobarron8789]

@@red_rabbit_specv how do i know if its a b16? Is that only for sentras because i have the altima 2.5 manual. Is that the same engine as the b16?

[@DSweervo]

@@bibobarron8789its very similar to, not exact

[@JayPimpN]

I’m a little late but what’s a spec V I’m getting hooked to start to mod my car up

[@red_rabbit_specv]

@@JayPimpN specV is just the trim version of the car. They will have 1.8s, se, gxe, ser as a couple examples. Different years has different options. Specv trim was available between 02-06 and 07-12 for the US and is marketed as the sporty version where something like GXE is more of the luxury version.

[@ViperzDesign]

Does qr20de have oil squirters?

[@red_rabbit_specv]

I don’t think so. 2ng gen specv qr25de does

[@ganbagoos4082]

$2000 wtf I am inexperienced in all of this but that’s fuggin expensive wtf

[@red_rabbit_specv]

2grand is pocket change for some. Not for me though

[@SiCaRiI_DaGgEr]

I wish I had paid that much for my kit 1millionyrs ago i.e the PTI kit back in '04

[@shaggyanng8768]

2k is a cheap turbo kit for sure. Most are 5k easy.

[@SiCaRiI_DaGgEr]

@@shaggyanng8768 Exactly, a well made turbo manifold and down pipe alone will run close to $1000 alone (treadstone for example)

[@somerandomassguyontheinter2869]

compared to any other complete and *reliable turbo kit, it’s kind of a bargain

[@DrakoGtechno]

Yo dude want to collab on something I have another channel where I drag race I won first place in a NA motors with a 2020 california Special mustang gt well I’m buying a sleeper car now and have a deal made with someone for buying a good condition Nissan se r 2002 for 1600 going on a road trip to pick it up and wanted to install a turbo kit on and get forged internals etc maybe some c1 cams you know the drill but I would like your expertise because you have a Sentra to guide me in the purchasing maybe a sequential turbo kit for it a small and big turbo together and well I have tuners and mechanics to record The install with me and I’ve been looking around at videos and well I see you have knowledge of the Sentra so I humbly ask for your help on this project I want to make a fast car maybe contact q&a1 for costume carbon fiber driveshaft get upgraded gears for the trans stage 3 clutch get a r34 body kit for it I’ve been doing my research and have experience building other cars but this is my first Sentra I want to run e 85 upgrade the fuel pump to be able to handle it with the injectors coils etc I should finish building it by October but again would like to have your guidance on how to do it or should I go single big turbo e85 nitrous with the forged internals you think the 2.5 can hack it or ?

[@red_rabbit_specv]

@@DrakoGtechno message me on Facebook. I will help out with what I can. Just search Ed Coykendall and look for the Sentra in the banner pic.

[@DrakoGtechno]

@@red_rabbit_specv okay I live a pretty private being a disabled army retiree so I have a picture of a purple Barnie as my profile pic

[@DrakoGtechno]

@@red_rabbit_specv don’t be alarmed lol

[@DrakoGtechno]

Ed coykendall just sent you a message dude

[@DrakoGtechno]

I’ll change my profile picture to something more recent so you don’t have to talk to some barnie meme lol