Soft Plastic LURE EYE MOLD!! Lure Eye Injection Mold System

Link To Mold Here:
anglingai.com/1-4-6mm-eye-mold/
Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#luremaking #softplastics #fishing

[@WorldsWorstFishing]

Be sure to check out the safety tips on using this mold properly starting at 23:12. What an awesome creation this mold is!

[@avifreed5243]

The mold design is ingenious, I expect there will be some awesome eye combos in the future !! Sick vid !

[@jeffreis5194]

Bet now that the mold is figured out it wouldn't be too difficult to do different shaped pupil plates

[@KainCarlton]

There needs to be a mold with a variety of eye sizes to make it more practical than buying every size individually. Awesome mold man, love the videos

[@benerickson8612]

his mold is absulutley genius

[@TheKatlynDawn]

*I caught this guy on my 3rd cast. Paired with these 4" trailers. **enjoyable.fishing** recommend slightly modified, I think i trimmed about 3/4 of an inch off of it. Its deadly!*

[@krishnaparmer6100]

Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit kzbin.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.

[@jacobcarter9242]

Triple injection eye ball? I think they would look very cool

[@40s9s3]

Was thinking will it laminate but you sir pulled out the triple idea. Hats off 👏

[@jeffreis5194]

@@40s9s3 c block eyes with the dip your car colors? Interesting.

[@kaiboshi]

I wonder how a large hand pour swimbait would look with a bunch of suspended eyes in it. Not natural but possibly interesting.

[@saltwatersportsman6039]

You would have to be careful not to melt the eye balls with pouting hot plastic

[@fabulous7567]

That is an engineering marvel. Wow. Super cool. Would love to see the adhesion to the swim bait body if you could “peel” the eye away

[@WorldsWorstFishing]

you can if you try..in my experience with the traditional eyes they will eventually come off from time to time during extended use..doing it this way with softer plastic should help that.

[@basscatlildave]

That is an amazing mold. Hats off to the engineering y’all came up with. Can’t wait to see future videos with this.

[@Snap-Time]

I am so impressed by that mold. Seriously, that is _genius!_ Thanks for sharing!

[@TooFreshFishing]

Great mold and awesome demonstration Chris. Time to spend some more money lol. Angling Ai for the win, yet again. 🙌🏾🙌🏾🙌🏾

[@WorldsWorstFishing]

Thanks 👍 it is an awesome tool to have!

[@DeeDee-vu5mi]

Have watched this video many times, just getting into the bait making for personal use. Just rcvd my new eyeball mold from Jason. Also rcvd a modified 4" DR swimbait mold. Instead of the injection ports on the side , I had him put the ports on the top of each bait so doing 2 color laminates will be much easier. Thanks again for all the great info

[@Daniel-jn8fp]

Este molde es el más increíble que he visto, gracias por compartir. This mold is incredible, thanks 4 sharing

[@adl2005]

Amazing how they came up with the idea BRAVO.

[@gabrielemboston]

Thank you for the amazing content. Its helping out big time!!!

[@edkeith332]

This is an insane mold!! These Angling A.I. folks are on a whole other level. Great demonstration video!

[@WorldsWorstFishing]

Much appreciated!

[@nathangroom6769]

Awesome video chris! Thanks for sharing! Love watching your videos!

[@WorldsWorstFishing]

🙌🙌

[@Bigwormith]

Wow, now I gotta have one!! Thanks for the video on this!!

[@frankhunt5018]

As my kids used to say Awesome Sauce, great work Josh and Chris. You guys continue to push the envelope on this hobby/business.

[@WorldsWorstFishing]

We try haha

[@johnriopelle6930]

Genius idea. Love the channel and all of Josh's creations. Amazing

[@WorldsWorstFishing]

Glad you like them!

[@AnglingAi]

Awesome job again Chris. The whole shop just sat down and watched your video. We all can't thank you enough!!!!

[@WorldsWorstFishing]

hope all enjoyed!

[@ZZ430T56]

Angling Al Do you think with a drill press and a ball bit we could modify other molds by our selves?

[@AnglingAi]

@@ZZ430T56 Not without a way to secure the mold and mechanically move the plate. Without that, it will jump on you and be a little unsafe.

[@groundedfilms5877]

What a cool mold. Josh really put some time in that for sure. #killingthemoldgame💥💥💥

[@tracynewman5246]

Super stuff can’t wait to see what he comes up next 👍

[@WorldsWorstFishing]

we have some other "wild" ideas in development

[@BassmasterSKohout]

This content gets better and better every video...killin it Chris!

[@WorldsWorstFishing]

thanks!!!!

[@HB-ti7ec]

Very nice! Thanks for the video. Always learning something new each day. Un abrazo from Cartagena, Colombia.

[@WorldsWorstFishing]

Thanks for watching

[@DeeDee-vu5mi]

Awesome mold, I have been using it since it came out. Thanks for the video.

[@WorldsWorstFishing]

🙏🙏

[@TermiteTweeker]

I'm going to have to think long and hard before purchasing this! Oh wait...there is my shipping conformation. That is a crazy cool idea and so glad I seen this video tonight. You are a great salesman for this company. As soon as I seen the title I knew I was buying it. Love the pre-made eyes but to be able to make them yourself is a game changer!

[@WorldsWorstFishing]

Hope you like it!

[@ziggyblue782]

Dang man, that is absolutely fantastic. You guys did an awesome job.

[@WorldsWorstFishing]

🙌

[@mre4875]

You guys always seem to have another trick up your sleeve. AWESOME! 👍🍺🎣

[@MPWells-mb4po]

I have never made my own lures before somewhat new to fishing but this is awesome. I need it.

[@DeeDee-vu5mi]

Hey Chris, early on I was having trouble with the eyes shifting in the mold when shooting. I then strated using a tiny dab of vasaline in the eye socket and that helped keep the eyes in place. Every once in a while I will run into a bonding issue between the eye and the bait. I am wondering if its the vasaline causing that or not enough temperature. I shoot the bait pretty hot.......thaanks for your input.

[@ZZ430T56]

You also can add these to any bait with Mend-it or a lighter/soldering iron. No clear dip required

[@WorldsWorstFishing]

absolutely

[@DeChane369]

That's sick! I can't wait to see the final product with a dual injection. Could you do a bloodline with a skin pour? I'm assuming yes but youd probably have to do a little bit of a heating process to get it to bond better. I really want to try and combine all those techniques into a bait

[@3HandsCustomTackle]

Great collaboration on a super idea

[@bayouburner281]

That eye mold is slick👌🏻 *Gets ready to see some cool custom eye work*

[@WorldsWorstFishing]

Can't wait!

[@sladojt0537]

I absolutely love your videos keep it going

[@WorldsWorstFishing]

Thank you so much!

[@Bunyips_Baits]

absolutely brillant..anglingai are killing it well done guys

[@WorldsWorstFishing]

👍👍

[@lancehenthorn17]

Love the new mold. To pour a solid color eye in one pour. All you need is solid a backing plate. That way you can save time and plastic. I think that would be a good option to include with the mold or a separate purchase item. Really enjoy the videos. Tight lines.

[@WorldsWorstFishing]

We discussed that idea of a solid plate yesterday, might be something he will test

[@lancesolevilla1972]

Really cool videos! Makes me say “ohhh so that’s how they do it”

[@SnappySnapfire]

Love all the molds you get!

[@WorldsWorstFishing]

Me too!

[@willporter2722]

Hey man awesome looking baits school can wait because I’m watching this

[@str8dappin]

Wow! Incredible idea! That is a really awesome mold. It's a real privilege to see such genius at work. Stay on the gas pedal my friend, you are on your way to a million subscribers! Stay safe Makin baits

[@WorldsWorstFishing]

That's the plan!

[@haroldbolton3383]

Looks like a great addition to the collection.

[@WorldsWorstFishing]

Very!

[@johncox5681]

I think that's the coolest thing I have ever seen!! WOW

[@WorldsWorstFishing]

🙌

[@tvance111]

You could use the eye mold to make shad spots too. Just use the solid eye. Great mold and great video

[@randymoore3621]

Can’t wait for more videos absolutely awesome

[@WorldsWorstFishing]

Thanks

[@romanhumbertogarciamoreno5163]

Es una idea genial.me gustaría saber dónde consigues esos moldes.

[@kevinhocroft6609]

awesome mold will have to add these to the list

[@WorldsWorstFishing]

Go for it!

[@chuckymystic]

fire. awesome idea!

[@customrodsandbaits8620]

I like it! It will go on the wish list.

[@isrrarlmartinez1837]

Awesome vid man

[@gurohyena3649]

Can you use a C block or blending block with them? This is an exciting new mold!

[@freidabjork1302]

Love that eye mold!

[@AddictedAngler]

very creative how they come up with it

[@caseywallace2240]

Pretty dang slick

[@ccr42]

I found it. Thanks for the info.

[@precisionanglingYT]

That’s some forward thinking for sure!!

[@WorldsWorstFishing]

yeah he did the impossible

[@eyesmadeeasy]

Great job, Love it!!

[@WorldsWorstFishing]

Thanks so much!

[@josephsalazar5831]

Chris that eye mold is super cool and those swim baits are a winner. 👍

[@WorldsWorstFishing]

Thanks 👍

[@joegattuso2052]

Amazing.. Can't wait to buy one.

[@WorldsWorstFishing]

Hope you enjoy it!

[@hannable3871]

Now this is a really neat mold idea.

[@WorldsWorstFishing]

It's sweet

[@rcracer3235]

Good video I like how you showed the product I can use this eye mold for fly tying there are a wide variety of fly's that you add eyes thank you.

[@WorldsWorstFishing]

🙏🙏

[@steveparker7763]

Pretty damn slick!

[@pimpshack81]

Man that’s an awesome mold 🤘🤘🤘

[@WorldsWorstFishing]

It sure is!

[@mikeovercash3991]

Well Fluid dynamics CNC work What a great mold gonna be cool You will be able to do a lot of Bait

[@deadeyedarren]

What a sweet mold! Guy who made it is a genius

[@WorldsWorstFishing]

yeah he said the solution hit him one night

[@worldwideguitarman]

The eyeball mold is wicked!

[@WorldsWorstFishing]

Indeed

[@harveyhenderson8146]

Excellent work. Do you have a favorite bluegill mold?

[@gregorystacy470]

Thanks for the video. I have the 4 inch blood line mold and th 4 inch hand pour thes eyes will fit them right?. Thanks Mr.jones

[@WorldsWorstFishing]

Yes

[@DeeDee-vu5mi]

What spray adhesive are you using for the eyes? Mine vasaline idea works ok but i believe the adhesive might work better

[@fishingwithspencie]

Chris, im having trouble with my new Do-It 4oz. Hand injector. Every so often I have to take it apart and clean out thin bits of plastic that has gotten behind the plunger. If I dont keep it clean it ends up drawing air instead of plastic. Do I need to replace to o-rings or is this normal? I just bought the thing so I figured the orings would be ok but perhaps it sat in the store for a long time before I finally purchased it?

[@booster4470]

Very Cool. Black pupil with Red and or red/orange Iris. . Killer color for bream. The solid eye would be great for making a spot tail minnow or Shad.

[@tommascari8298]

Great video & innovation!

[@WorldsWorstFishing]

Glad you liked it!

[@jasonpluta3128]

those eyes are amazing! how about a spotted gar swim bait?

[@jeremycaraway6432]

Awesome design wish i had all yhat stuff. Id make baits all day

[@georgedolak8120]

unreal. they look great.

[@WorldsWorstFishing]

thanks

[@raymondpennington4037]

This is fantastic, posted just a few minutes after I made another large discounted order. Time to go back and purchase more stuff “5 inch open pour hint”

[@WorldsWorstFishing]

haha

[@mikeockler7121]

FREAKING GENIUS

[@WorldsWorstFishing]

yep

[@tchelojoao]

Show...the best...muito bom...vamis trazer essa tecnologia parao Brasil....👋👋👋congratulations...Marcelo João....Brasil...Rio Grande do Sul....Canoas City...like

[@trentonpeters8589]

You should try a swirl or something like that . Loved the video keep it up 👍

[@WorldsWorstFishing]

Thanks for the idea!

[@getfastfish5020]

someone had a great idea with this mold

[@zacharygay8733]

Well dang it I just put in a big order Tuesday at A.I. Now I gotta have this as well lol.

[@richshackelford5793]

Very nice . I see some kick ass swimbaits in the near future.

[@WorldsWorstFishing]

always!!

[@huntryx1]

Brilliant!

[@hancephillips8565]

Great videos all ! Is the mold for the Grass Grenade available for purchase, and if so, where? Thank you.

[@frogassassin1587]

I stopped paying attention in history class to watch this😂

[@WorldsWorstFishing]

haha dont fail the class

[@frogassassin1587]

World's Worst Fishing we can use our phones in it cause he knows the remote learners do so🤷🏻‍♂️🤣

[@lancehenthorn17]

@@frogassassin1587 hate to say it. My son does the same thing.

[@Scott___T]

That is a cool mold

[@TEDDY-ol5cl]

The 1 person who dissed liked this as to be hater. Another BANGER video keep killing it

[@jonathandiaz4617]

Nice work man 👍👉

[@WorldsWorstFishing]

Thanks for the visit

[@anthonydunn9414]

HELL YEAH 1000000000000000000000% GENIUS JOSH DOES IT AGAIN!!!! -DROWNINGLURES

[@WorldsWorstFishing]

he's insane!! in a good way

[@anthonydunn9414]

@@WorldsWorstFishing dude they came out so nice 👌

[@WorldsWorstFishing]

@@anthonydunn9414 👍👍

[@michaelporterfield9081]

I like bait plastics the best. The ultra clear is awesome and free shipping. I know your sponsored, but it’s good stuff

[@WorldsWorstFishing]

bait* plastics...very good plastic.

[@AJTuck-sx6pj]

Y’all should try and make some with different types of pupils like reptiles and stuff

[@bradandrews832]

Hi I’m having a problem the plastisol I get is a medium blend and it’s the only one I can get in Canada the problem I’m having is with open pour the plastic when I poured into the mould seems to be shrinking leave divot The top of the mould doesn’t want to fill I’ve heated the mould up quite hot to accommodate the hot plastic to stop shrinkage I thought but it still seems to be happening I’m wondering is it because of the medium plastic that I’m using I sure hope you reply thanks Brad Andrews your friend in Canada by the way great show been following it for a long time

[@Ericg3654]

That’s pretty cool. You could probably put a hook in the string of eyes and catch a fish with it.

[@kj4430]

You `should make some videos where you fish with your baits.

[@WorldsWorstFishing]

def hope to soon

[@kolbybaker1924]

Man never fishes, just makes baits😂

[@WorldsWorstFishing]

@@kolbybaker1924 my fishing is......about par lol

[@liv6517]

Lake Okeechobee tips or Harris chain tips?

[@WorldsWorstFishing]

not really..dont live anywhere near it

[@tommoir8536]

Well that's just bloody genius!

[@WorldsWorstFishing]

Yep!

[@tommoir8536]

@@WorldsWorstFishing I thought that the Little Hammer spru flip was clever (and it is lol) but this eye solution must have been a Eureka moment for sure.

[@BamaShockz]

would never have guessed you could inject these amazing eyes

[@davidlong8182]

awesome video as always. What if they made a solid plate for one color eyes so the plastic can't get out

[@WorldsWorstFishing]

we discussed that...might be in thw works

[@rowanschilling8551]

Sick vid bud

[@WorldsWorstFishing]

thanks dude

[@user-ok2vl1yo5s]

Could you get a solid color eye if you remove the top plate and trim the bottom plate pupils flush like your trimming the mold spru, then reclose the mold an fill the iris cav completely. Sorta like a core mold with a soft core. Or would it make a more 3D style eye 👁?

[@cr0cket01]

what those eyes like if you used in from moulds as the frog spots? instead of dripping in plastic or painting them in.