Custom 4Runner Drawer and Bed System

This was a custom box made for a customer who had removed is 2nd row seats and sliding cargo tray. He wanted a permanent built in system he wouldn't have to remove or mess with every time he went camping. In the end he was very pleased with how the system worked and finished product turned out.
Side Window Racks: www.victory4x4...
Camp Stove: amzn.to/2ZOH4ZR
Coffee Table Hinge: amzn.to/2ZDwDZk
36" Locking Slides: tinyurl.com/y8...
GET 10% OFF SOLAR PANELS, INVERTERS, BATTERY CHARGERS, AND MORE!
I've partnered up with RENOGY to get my SUBSCRIBERS a discount on the best solar products in the industry! To receive the discount follow this link renogy.sjv.io/... then enter "SolidWoodWorx" in the coupon section for 10% OFF!
ALSO FOLLOW ALONG HERE
/ solidwoodworx
/ solidwoodworx
ABOUT ME I grew up in a cabinet shop and was a born to be woodworker. In the past few years when work slowed in the custom cabinet industry I converted a few friends Vans and SUV's so they had more storage for adventuring, work, or just the weekend beach getaway. Before I knew it I had my own business making people's ideas come to life. I design and build all kinds of custom wood work and vehicles here at my shop in Huntington Beach, California! Please email me [e-mail] for more information.

[@norsefalconer]

Fellow wood worker here. I really appreciate the craftsmanship. Wishing you as much success as you can handle.

[@ibaD3aTh]

I've been checking out lots of drawers systems for DIY purposes. After a year of watching videos, I can easily tell that you're designs are the best. Thank you for sharing.

[@aguyhisdog9485]

Hey! That 4Runner looks familiar! Thank you again for the awesome build, Brian! I'm really happy with the way it turned out and I have received a ton of compliments on it. Awesome work as always!

[@MaxSualkin]

Is the stove platform sturdy enough with two pots full of things on it?

[@aguyhisdog9485]

@@MaxSualkin Yes but I'll probably end up using it more as a food prep surface and use a separate table for the stove due to the propane canister needing a place to sit.

[@yankswap]

What did a build like that cost?

[@mauifive1311]

Nice work. How much was this build?

[@jimbojames2181]

gerard five please tell price !

[@bamargera0123]

That drawer slide support for the piano hinged cooking surface is very smart! I went over that exact problem in my brain hundreds of times when building my setup and I wish I came up with that idea. Great job!

[@edwardvillate2112]

You're ALWAYS a ⭐ STAR when it comes to BUILDING SOMETHING'S !!! THANKS 👍 👌 !!!

[@SeizeTheAdventureCo]

I keep coming back to this build because it’s perfect! Rad design man

[@JoshuaSHogg]

Builds keep getting better and better

[@matthewhill4295]

One of the best work space - making ideas ive seen. Love watching these videos

[@homeandmorefurniture2394]

Why would anyone give thumbs down.. that’s freaking awesome 👏

[@ThisTall]

Man I’ve been pondering if I can replace my 1/2 ton short box with a gen4 4Runner to fit my cabinet installer tool kit. This is encouraging.

[@denahom]

Nice and modular, great use of space!

[@egsmachine]

my favorite so far. good stuff

[@johnhaberstro8165]

Idea overload... true craftsman! Cheers mate!!

[@bellanova435]

I definitely want to do this when I get my 4runner!!!

[@carelscompanys1]

I like your work really nice. I build stuff on the weekend here San Gabriel Valley for fun. One thing my wife grandpa who was a cabinet make showed me that really finishes of the cabinets use the router to bullnose/round over all the sharp edges/corners that little touch will really impresses the customers when they bump against them, they will thank you later.

[@mohammadajmalahmadi1764]

Top 👍👍👍👍👍the 3 and the 4 better. I appreciate the bigger Space underneath particularly by the back passenger door

[@RoccoSilingo]

I REALLY REALLY need this in my life! Please don't forget about me when you are back to doing custom installs again! please!

[@alwindsouza633]

Your design is the best 👍🙏🙏

[@ceratonia04]

the table for the stove is a great ideea! well done

[@explorethebush]

Man that’s quality and tidy work

[@loverainodie]

Love the table top/extra platform. Details and movable slats on point

[@robgindc1]

More modular magic you've performed. Nice! Stay safe & well.

[@PetrS]

So minimalist setup and two great ideas I never saw before! 👍

[@fernandoanguiano3181]

Hey Brian how are you this is Fernando from Los Angeles California I just like to say I love you show you give me a Lotta good ideas I am building my my truck a lot of spaces for my tools I do construction and believe me I relate to this so simple and nice on all the the the furniture’s just congratulations man keep doing that thank you

[@jimflanagan6029]

You did a great job, nice setup. The 4 Runner is next on my list , I’ll hit you up lol .

[@danmanx2]

Bro, you are sick with wood!!!

[@lonelyman6192]

nice design and building. thank you for sharing.

[@timbior]

Wow! nice clever build!

[@FraserImageTV]

Can you do one for a 2009-2013 Subaru Forester please and thank you !?!?! I’ll buy a blueprint too !!! Pretty please ! Love your builds !!

[@rachmuch5226]

good custom car for camping.

[@joyramospacilan900]

Beautifully done! Great work.

[@gevorgnazaryan8720]

Well done. I am in the process of designing one just like this for my fj cruiser

[@AnnieGill7]

Genius! Very special build!

[@colewalliser]

So sick dude!!

[@jorges2000]

Awesome set up. I would love something similar for my 17 Honda Pilot.

[@deanflet973]

Thanks for this Awesome video content. I have 4Runner I'm looking into adding almost the same setup but not that intricate as what you have built for this 4Runner.👊😎👍

[@Som3thingClever]

Wow awesome. I just stumbled onto this and I happen to be in Huntington Beach!

[@richardsnation4609]

Beautiful work!! I the custom ideas that you have. Totally what I've been looking for. Awesome!!!

[@johnrichards3666]

You're the best ... hands down.

[@kevinjhonson5925]

That is such a good idea and the workmanship is so good. I think I’ll build one for the back of my CRV Just the size of my back area. It would save so much room for my work tools. Now mine will not look anything like that I most certainly do not have the skills to do it like this.

[@PatrickDanforth]

Great setup!

[@HugoGarcia-mm2uy]

Great work again and again 👏

[@davemartin7227]

Amazing work as always! Nice job!

[@Espinal_424]

I commented on another video of yours and continuing on this one. See like in this video, you have one locking slide on the left and none locking on the right of each drawer.

[@SolidWoodWorx]

I replied to your comment

[@claytongross5657]

This guy seems like a pretty cool guy, seems honest too. I wonder if he has any ideas for other suvs other than Toyota? I have a 2002 Mercedes ml500 suv and I already pulled the back seats. Its just a different area to work with because it steps down on the frame. So if you get a chance to look a one of suvs and have some ideas please let me know.

[@timgosney9949]

Best one yet!

[@ffield12]

Also might want to add drop down adjustable support legs once the rear drawers are pulled out

[@SolidWoodWorx]

The slides can hold up to 500lbs and are bolted to the vehicle

[@ru4reel2014]

Hey mate nice project

[@beautifuldream108]

Good work.

[@nohabloemojislosiento4930]

TRD pro 4runner? That is just pure flexing considering the TRD pro is 10k more for fox struts and the same performance as the TRD off-road. Lol. I love your builds though. You've got gen5 4runners down to a science, man.

[@sandtracks]

Great work looks good, how about bolting the stove upside down to table than when you open the lid the stove comes with it an no more fiddling to get stove out?

[@SolidWoodWorx]

Could work ya

[@willkidd12]

How in the world do you install those coffee table hinges

[@djcasper69]

that's what I need.

[@michaelmichael3533]

How do you secure the platforms/drawers down? Trying to start a build soon and it’d be great if you maybe show how you go about securing/where depending on the vehicle.

[@J.Young808]

Hey an Overland Bound member

[@gomrko]

Well done. I like it, a lot. I may do something similar in my land cruiser. Could you put the drawers all the way forward to the front seats? I have that same stove. I think I would mount the stove permanently to a slide out shelf pretty much where you have it but a bit lower with room for a small bottle of propane. And maybe permanently fix the lid over the stove as another horizontal area close to the action.

[@SolidWoodWorx]

Yes you could do longer drawers, would just need to support them in a way more towards the front area.

[@mrfixer987]

Wood you be able to pull a drawer and show how its mounted to the floor?

[@SolidWoodWorx]

I dont have this vehicle anymore but you can watch this video on how my dual drawer system gets mounted. kzbin.info/www/bejne/iKS1lJyvfK-Wi80

[@sokunvat9474]

great

[@kennyb214]

Any chance you could do a how to video on how to install those coffee table hinges

[@SolidWoodWorx]

I can try yes

[@happycamper1687]

Beautiful job! Are you able to build one with half of the seats removed and the remaining ones in place?

[@SolidWoodWorx]

I have never done that.

[@nicholecooperonline]

Love

[@katiedodge1273]

tbh i love brian

[@lovemind8466]

Have you ever done something to a Toyota Sequoia? Like I would love to add solar & LED & just about this same set up done to mine with a added camp kitchen to the back & Awning to the side..🤔..This would be amazing 👏

[@SolidWoodWorx]

I have built a drawer system but never electrical before.

[@bradthomas1988]

You're so good

[@joshfynbos]

legendary, thank you

[@lmac3229]

I love this!! Your work is very neat too. Any chance I can work with you and learn more woodworking skills while at it??? I want to do a build in my '17 Suburban. Have you done anything like this for a newer Suburban? I built a temp deck/bed for my last 2004 Suburban but now realizing I need to do more modifications to this newer rig before I can even start on a build.

[@moraheem8292]

How much does this cost just an estimate if you just want it to stop behind the back seat? Neat work 👍🏾

[@roadboogie]

Very inspiring your chanel! I d like to know about where and why to place that „coffee-mechanic“ exactly? i def will work with that in my van too. thx for sharing knowledge and concepts! stay well and happy thou.

[@SolidWoodWorx]

Sorry but i dont have any dimensions for that unfortunately.

[@twodogsdave66]

Hi Brian, been watching your vids and you do really nice work. Would you show how exactly you build a drawer? Specifically, like how do you connect the sides together and to the bottom. Your drawers look super tight and was just wondering about your technique. Have a great day!

[@خالدالمعلا-م5ل]

good job Is there a clip for how to implement it

[@thethoughtchapter]

My head is bursting with ideas after watching this 💡 the removable dividers are such a good idea!

[@toasterbear]

Awesome

[@iranpediusa]

Hi again buddy, could you please tell us what kind of paint you use on the wood because all the paint has smell specially inside the car and it’s always close . Thanks buddy

[@SolidWoodWorx]

No paint was used. Just a polyurethane clear coat.

[@iranpediusa]

@@SolidWoodWorx Thank you so much again 🙏🙏

[@maycoramirez188]

I really like this ? bro what’s the price for this one I’m interested I live in San Francisco ca ?

[@SolidWoodWorx]

You can find all information on our website www.solidwoodworx.com

[@ML-mx1py]

I wonder how much extra weight is added to the car with just the drawer system.

[@SolidWoodWorx]

150lbs or so

[@NairbianVenturer]

So good. What kind of plywood do you use?

[@SolidWoodWorx]

Luan

[@orestino6212]

You are a master carpenter

[@ChristianeMarshall]

Is the stove table stable? Seems it might not hold with water in a pan?

[@johnkassay7064]

I really like your design, and the quality looks good too! How do you attach the drawer slides to the drawers and cabinet sides? It looks like some sort of thru bolt??

[@SolidWoodWorx]

Yes a furniture bolt or sex bolt.they call it

[@BrianHuynh1]

love the build, did you use a non locking drawer slide on the right side of both drawers? awesome work!

[@SolidWoodWorx]

Ya thats all i could get to my supplier at the moment.

[@sunilsharma-ew5cz]

This is really neat. Would you build something similar for my OB?

[@mohammadajmalahmadi1764]

Hello just an idea for what it’s worth . A split say 2rd/1rd to accomodate a similar bedding would afford use of thèse drawers on rainy or stealth mode. That would make it just perfect ! Would very mu hui l’île to see

[@SolidWoodWorx]

Im sorry but that was hard to understand

[@365AdventureCo.]

How much does a set up like that cost?

[@SolidWoodWorx]

Thanks for the interest. Unfortunately I dont do any custom builds like this anymore. But on my website you can find my basic drawer systems for sale. www.solidwoodworx.com

[@ecruz2987]

He I like it 👍 , how much is 2021 4Runner ?

[@SolidWoodWorx]

Can find more info on Solidwoodworx.com

[@ecruz2987]

Ok thank you.

[@mesittingduck]

Nice idea but I can see that tail light cooking

[@outnaboutusa1705]

🔥 dude

[@Aquatic_Amigo]

How much something like cost ..guessitmen

[@MonkeySpecs301]

how much weight can that coffee table hinge hold? thanks

[@SolidWoodWorx]

The drawer slides can hold around 200. As for the table hinge im not sure to be honest. It was designed to have food or things your prepping up there.

[@carlosdelasierra909]

awesome work, did you use 18mm ply?

[@SolidWoodWorx]

Yes .75”

[@donaldlawan9013]

How much it cost everything including the labor?

[@SolidWoodWorx]

Please email for any build inquiries. Thanks

[@ssuejhong603]

What can I do contact? I need sprinter van like that

[@SolidWoodWorx]

[e-mail]

[@adityabharatvraman6859]

What is the thickness of the plywood

[@SolidWoodWorx]

¾"

[@ru4reel2014]

Where are u based

[@ojbarberena7090]

What type of wood do you use? Cheers from Colombia south America

[@SolidWoodWorx]

Luan its a lite weight ply

[@gavinpage7237]

What length were the drawer slides that you used?

[@SolidWoodWorx]

36" i sell them on my website www.solidwoodworx.com

[@Matthew_Stegall]

Little extra length on the stove area for the propane extension, without it is it just hanging?

[@chiebert290]

I'd be tempted to relocate it. I'd hate to melt one of my tail lights.

[@craigmicek1016]

Brian, Great looking build! I never see chip out! Do you ease the edges at all?

[@SolidWoodWorx]

I do my best to sand everything always ease the edges yes.

[@MsClever26]

can the stove top hold the weight when pots etc are added? does the platform for the bed flip at any of the sections to make the under bed storage more accessible?

[@SolidWoodWorx]

No flipping in the bed area. Yes platform can hold the pots

[@emmaferrer6417]

cool!

[@thisoldman5386]

What length mattress fits in the back of that build?

[@SolidWoodWorx]

I think it was around 6' long.