SolidWorks FL Tutorial #282 : PC Fan with flow simulation analysis

sw-tc.net/#282 solidworks tutorial complete PC fan with flow simulation, info at start shows tutorial sections. Flex feature may make the propeller more flexible to generate many flow cases to study. Don't forget to subscribe if liked the video for more advanced tutorials.
Used Coil tutorial l: kzbin.info/www/bejne/jZPHn6t3p7-Eack
►Engine 2 will be completed on:► kzbin.info/aero/PLfP1GxQ1lPaTPusHioVJkxQD3kS0lUYWf
►Our Playlists:► kzbin.infoplaylists
►Our Website:►www.SW-TC.net
►Our channel :►kzbin.info
►Facebook:► SolidWorks.Tutorial.Page
►Tutorials Engineer Channel: ►kzbin.info/door/IAbHzXf2p8FbFCP1Q7fb4w
►Engine Project :►kzbin.info/aero/PLfP1GxQ1lPaSWOY7biDuGwAnmmQplrREZ
►For more SolidWorks Tutorials: ► kzbin.info/aero/PLfP1GxQ1lPaQ_F5UUAuF3pxbP4q6Jqpy2
►CATIA Complete Learning:► kzbin.info/aero/PLkMYhICFMsGbYCvbGrrygtqGiBGguIzbf
►Inventor Complete Learning:► kzbin.info/aero/PLkMYhICFMsGYkVrkVbX4xngskLzxTBStJ
►SolidWorks Surface Lectures: ► kzbin.info/aero/PLfP1GxQ1lPaSwJCvC0KFe7s472ZcCY4df
►Solidworks Sketch Tutorials: ► kzbin.info/aero/PLfP1GxQ1lPaTpiP_AvdjXdBtCX3CKqgkt
►SolidWorks Beginner Tutorials: ► kzbin.info/aero/PLkMYhICFMsGajeARsY7N1t1jhbtMb1poL
►SolidWorks Sheet Metal Lectures►kzbin.info/aero/PLkMYhICFMsGabiRA9g-BwA4a8okUFFO_5
►SolidWorks Weldment Lectures:► kzbin.info/aero/PLfP1GxQ1lPaQVHAY9JE6do-u5oRaf5-F6
►Available Playlists:►kzbin.infoplaylists
►Learn Engineering Playlists:► kzbin.info/door/IAbHzXf2p8FbFCP1Q7fb4w/playlists
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

[@theonolaivar2840]

This 2 hour tutorial on a fan ended up in my recommended. Great!

[@TheOnlyRaceEngineer]

Absolutely great tutorial for rotating mesh... I had been struggling for such cases since long until I found your tutorial. you are now part of my future endeavors . thanks a lot

[@pradeepr95]

Whats that Baloch in yua name.

[@vithlanibhargav9643]

sirji great work please do upload this type of videos more frequently, thank you for sharing great knowledge.

[@MJ46.91]

THANK YOU SO VERY MUCH FOR SHARING THIS EXPERIENCE WITH US, AND WISH TO SEE MORE

[@HamadBuhamad]

Thank you for your amazing videos .I suggest to upload the drawing files for the projects in the videos ,because we need to think and try by ourselves to make it and then get help by your video whenever we need . Thank you again :)

[@designwarp9117]

Best Solidworks tutorials on the internet. Good music too.

[@baronbarbaron]

That is awesome video. It helped me a lot, to figure out how to do some operations.

[@Specialeffecks]

I am making a Rotary Spark Gap for a Tesla Coil using a computer fan very similar to the one pictured in this simulation. I needed to identify the location of 5 points at the air intake of my fan with the greatest air velocity (to draw away iodized air from high voltage contacts). I have 5 copper spokes (made from a large clock gear) that is mounted to and will rotate with the fan blades - so they will be at fixed points in relation to the fan blades. These spokes will make contact 5 times per rotation to two stationary contacts mounted in front of the fan. (I cannot use the outflow of the fan as the only rotating mounting surface is at the intake side - and the fan is not reversable). As any two of my 5 spokes pass in front of my pair of contacts - the circuit is closed ('on' and 'off' 5 times per rotation). This simulation shows the greatest air speed at the INTAKE of this type of fan appears to be just AFTER the leading edge of each blade, about half-way towards the center axis of the length of each blade. Now I know how to best mount my contact spokes for my Rotary Spark Gap!

[@yuanruiwang6635]

Thank you sooooo much for this awesome flow simulation tutorial!!!!!!!!!

[@priteshrajput9778]

carry on your work.... and very very thanks for sharing this knowledgeable videos...☺

[@JuanHernandez-yc9bm]

Good job 😀👏

[@suhailp4855]

please add tutorials for each and every simulation options (including vibration,buckling, load etc),also add videos regarding how to determine stability of a part in an assembly when subjected to certain vibration

[@ramymahmoud376]

good job. Well done

[@lolTeos]

Amazing work, by the way, I was wondering if you have some tutorials related to CATIA's simulations? They will help me a lot

[@michapoterek2034]

Cool. You did amayzing work. Thank you!

[@fjexpo]

Thanks for the video. What is the appearance you apply for each part?

[@raulduran3706]

great!! excelente muito bom , aprendi muito

[@jtvivojtvivo280]

Thank you

[@xaieuanhhung4249]

thank you !!

[@jedidiahsawyer1363]

crazy

[@markiiim5188]

Wow great video

[@romlef526]

Perfect

[@lucascasavalle]

Thank you for this amazing tutorial, it became the solution i needed even with a closed enviroment fluid. I still cant make the last step in the animation in which you select a part of the assembly to make it rotate. It just doesnt appear, i can only rotate the whole assembly, but i dont now why in your case the "Part2" appears right away in the tree. I would really appreaciate a solution for that. Thank you!

[@ronenyudzinsky838]

You forgot to make the inside wall of the fan blade a rigid wall as well

[@design-studiotalevski4523]

Great video. A bit slow tho, but on point. Good job!

[@Dr.pabloschmirtz]

Estoy impresionado, muy bueno!

[@leolopezc15]

Disculpe, he tratado de seguir el mismo procedimiento pero he tenido algunos tropiezos, ¿ha podido hacerlo?

[@vishalrodrigues3294]

Thanks a bunch

[@bidonpomoew6536]

How to simulate a waterwheel rotation without prescribing it's rotational speed? Like let it start moving due to river flow. Thanks.

[@davidhernan0996]

thank you

[@harywijaya4590]

Awsome,, May I know, what your specification Laptop or pcu to do this working, because that's look fine from beginning until end (without hang or error) Thank you

[@NonCADKeys]

Cool. Thanks

[@stormy8815]

I have an error in the calculation - that the selected boundary between the solid medium and the gas medium does not intersect. I chose the same place on the cooler. Does anyone know a solution? Perhaps this is due to the fact that when setting up the flow simultion in the 2020 version on the last page of the window, I did not have the choice to match the x / y / z axis?

thank bro

[@sarthakdiddi7662]

Where are the links to videos of Motor, Coil and Ball Bearing ? Can somebody please reply with the links ?

[@samuelevatt124]

Hi there, when I change the angular velocity to negative for the rotating region the direction of flow doesn't change to -Y, only the rotation changes. Any ideas anyone?

[@edgarcarrillovazquez8576]

hey... does anybodu know waht is the coloor or the material for the first piece???

[@spacewalker_98]

Can you please tell the bluish fan material you've applied? Rest tutorial is justttttt 🔥🔥🔥 i thought i wouldn't able to make it...Rotor coil tutorial was really good n easy to understand. keep the best tutorials coming

[@jhonvargas7904]

I am making the 282 assembly and when making the cable in its third swept base execution the curve is not the same, it looks separate and I have done the swept base process three times but there are no tangents left I would like to know if you can guide me thanks

[@yugamsinghkushwaha7188]

it was very help full, but 1 error is coming when i set boundary layer for simulation it gives error its not a boundary between solid and liquid i tried many different way by selecting rotation rei=gion as face and the frame as face

[@muhammadhassanasghary495]

Nice

[@fendyrony3264]

Hello! I'm begging you, Please enlighten (from the point of view of SolidWorks analysis) in what position the airplane propeller (in flight) creates less resistance when the engine is off: 1). if the screw rotates freely or 2). if the screw is locked.

[@astorimarco2211]

Thanks for the excellent video, very informative. I ask you a courtesy, can you tell me which band is playing the background music? Thank you.

[@edgarcarrillovazquez8576]

I having problems with the CUT-REVOLVER.........what is the distance???

[@shafiqulislamsabbir7515]

It would be helpful if you provide us the Coil file or make another video for it.

[@daifun317]

nice 1

[@TheJosephStalin420]

What are the specifications of your Computer, sir?

[@eleziobatista1481]

GOSTEI DEMAIS,...!!!!

[@alisan-school]

❤❤❤❤Excellent ❤❤❤❤

[@priyamkansal]

can you tell me that from where you have taken these dimensions? It's important.

[@yapbt6579]

What is yourr workstation specification?

[@martinminhhoang8739]

Do you have a simulation of a Static Mixer tutorial?

[@ivanramirez5335]

Hola como cambias la dirección del vector adelante o atrás de los álabes? Cambiando el signo sólo cambia el sentido de giro de los álabes

[@AdityaSingh-in9lr]

Hey getting this error while running the simulation ""Warning! Unable to resolve the local rotating region". Can someone please help me to solve it?

[@mohamadikhwan4563]

Hello sir, can i know why i cannot change the direction in rotating region even i put negative in the value. Hope you help me. Thank you.

[@zagroubawalid9537]

super frer :O

[@DragonWolfHowl]

Hi, what GPU do you have

[@nardaoeletronica]

very good

[@xmenxwk]

34:30 try Shell feature next time

[@canszzz]

How did u draw rotor part? helpp

[@convencionalveranopolis7866]

good

[@eh_mamas8038]

I am interested in simulation, can you help me make a horizontal centrifugal casting simulation tutorial, using the SolidWorks application. thank you 🙏🙏🙏

[@eshabbatan9411]

how did you get that rotating regions

[@dontsubscribeb6436]

can i do the same on catia?

good job, well done and thank you for sharing but it seems like you kinda lost concentration and needed a cup of coffee after 1 hour lol

[@abdullahyurtoglu]

A Question: Could you calculate the applied force on the fan blade's shaft?

[@Gillambryce]

Yes. You should convert the rpm to a velocity (a fixed point going N m/s around an axis) there are online calculators for this. An example, 2000rpm fan times a 5cm radius has a velocity of 10 meters per second. You'll then want to calculate centripetal force (not to be confused with centrifugal force) Mass of the moving parts around the axis times velocity squared, divided by the radius of the motion. I'm not sure how much one of those weighs but say it were .05 kilos or 50 grams, there would be about 108 Newtons of outward force on the axis. Those calculators are online friend. Hope this helps!

[@leolopezc15]

@@Gillambryce Excuse me. Have you done the tutorial? Could you help me to solve some troubles?

[@Gillambryce]

@@leolopezc15 if you're asking if I can help you with cad software or simulations like these, no. I'm more of a technical guy

[@londonnight937]

@@Gillambryce I think they wanted axial force not radial force.

[@Gillambryce]

@@londonnight937 you know what I think you're probably right

[@xila8861]

whats the name of this song ?

[@danielperoni8422]

I need help. I need to calculate the power or force generated on the axis of a pelton turbine. I don't know which tools to use in Flow Simulation. If anyone can help me, I am grateful.It can be a quick video.

[@aeropeoplellc8160]

this needs to have sound with it .. its quite hard to follow the tutorial with audio. Otherwise great tutorial.

[@31rafa]

The 3D objects created in Solid Works can be used in 3DS Max or Sketchup?

i would like to know if its posible, and what kind of topology it generates when exporting to this software. I could be usefull to create shapes that in max are a pain the ass to make because of the holes or intersected parts.

[@John.Doe.2025]

Yes you can, just press Import in 3DS and select polygon quantity.

[@Obbsnja]

instructions unclear i have a fanblade in my nose

[@miguelangelmontaohuerta5021]

It appears a problem to me, at the moment of running the simulation it says "unresolved boundary condition", Does anyone know what to do to fix the problem?

[@95Addriliant]

on my computer, at the "wizard - Analysis Type" window, the rotation value didn't appear. could you explain why?

[@Estebangoku23]

Did you solve this problem?

[@junjialyu6187]

Can you have the link for us to download the file

[@pradeeppanga6611]

Where can i get all 2D drawings of this Assembly ?

[@Erksah68]

Maybe Gosho Aoyama-Sama has some?

[@phuccaoo]

35:52 How do you rotate it like that?

[@arjunkapadia1712]

It's space mouse. Worth 30,000 ₹ 😅😅

[@jagpreetism]

Sir we have same fan You have any idea to repair it

[@duynguyen598]

this flow animation is available in SW2012, mr? thanks.

[@divyamanivannan2650]

where can i find coil tutorial??

[@user-sy2xs4ne9s]

厲害

[@Matlockization]

You know from the air flow chart this fan would work better if it was put on backwards.

[@enginadil]

can you send me this part document. I want to try this airfane? Thank you. best regardsly.

[@enginadil]

[e-mail]

[@user-zu4lj2es5h]

Can I get the rotor? from 1:22:49

[@samwaymachinery]

Beauty

[@edgarcarrillovazquez8576]

why i can noy enter your website?

[@badreddineezzine1300]

which version of this solidworks ?????

[@hamid.s.zolfagari]

give me your first music name pls !

[@AuaerAuraer]

👏

[@ArtsFracture1.0]

1:32:44 where can I get this?

[@Tony_Pham690]

Awesome, dear sir, what are specs of your computer I 'm using Ryzen 7 2700, does it to good for thermal - dynamics analysis.

[@eshabbatan9411]

but how can you calculate the work done

[@juanpablozam5277]

SolidWorks Tutorial #262 : Rotor (coil wiring) 1:22:46 link : kzbin.info/www/bejne/jZPHn6t3p7-Eack

[@ArtsFracture1.0]

Thanks men. I was scared.

[@arjunkapadia1712]

Hey man will i make full motor or only rotor coil wiring made seperately?

[@felipepadao275]

I'm having an error by trying to make a circular pattern on blades... "merge error" someone knows what could be? I have combined all the parts as well

[@user-zg2kr6ph9z]

use body not faces & features

[@nithishrajank9784]

Will you give this solidworks file

[@user-lp2eq3cb5k]

can you send this cad?

[@user-yj7ci4pi2m]

do u have any link send me pls

[@shubham1e]

running the sim goes to mach speed. Is there any remedy

[@shubham1e]

its running perfectly fine but the second run goes like 'check your geometry'

[@user-yj7ci4pi2m]

i need solidwork software

[@luisrios8749]

Cuantas piezas tiene?

[@chetnaprajapati9483]

MY VERTICAL WIND MILL PROJECT DETAIL FAN BLADE 66INCH WIDTH HIGHT 144 INCH FAN 10NOS AIR DANCITY 241 WIND VELOCITY 5.5 METER PAR SECOUND TO 15 METER PAR SECOUND HOW CALCULAT RPM HOW MUCH RPM GENARATE PLZ HELP

[@solidworksnew9801]

kindly upload pdf file of project. its help us for dimenshion