Solidworks Mold tools tutorial | Introduction of Mold tools in Solidworks

[@T.jeffeson3524]

Great man....The best of us "human", is those who share their knowledge. Please continue.

[@Nuguineatru]

Very clear instruction for mold steps. Thank You

[@HaIPeHaOP]

A very nice introductory tutorial, thanks mate.

[@_diazz9215]

Thank you sir for the tutorial. Hoping for more complex design tutorials from you next.

[@meilin_]

Verrrrrrry helpful for me!!! Thanks a lot!!!! I'm a student who just get in touch with mould in solidworks, ur video is very clear, easy undersantable and I can follow it step by step. Absolute describe

[@marcnelis9048]

Very good presentation of a specific function, thank you very much. Very easy to understand if we have a basic knowledge. Great.

[@SilverSibeMetals]

Thank you for the mold tools tutorial.

[@lucideification]

i appreciate all your work, you've helped me out a lot.

[@nikhilrsuvarna_]

good work CCT :) Need advanced molding tutorials.

[@fw4568]

very good video. short and simple explenation.

[@SohilShah_Melodyman]

Very well explained and very helpful! Thanks for sharing!

[@dcsev]

Excellent tutorial video. Thank you for posting. Question: At time 5:53, when you did a draft analysis, there appears to be yellow (requiring draft) also at the eventual location of the parting line. Should that have draft too, and if not, why does it appear yellow? Thanks!

[@JashvinderRawat-t2u]

Very good and helpful information video for us ❤❤

[@Andrewatnanz]

Thank you. very good video.

[@kaushikraval5898]

it's really helping me out while designing moulds... right now we have purchased solid works so your videos are helping us a lot.... before that we were using delcam

[@anandg2457]

Very nicely explained....keep it up

[@maeezshaikh642]

Excellent video thanks a lot sir and please keep it up

[@goodwilldnd9789]

very good sir nice videos of moulding, you teach us about moulding with simplification and simple language. really super..bbb

[@grazynadarowna9642]

Your explanations are very helpful, thank you and best wishes

[@tayebmsatra2960]

you are the best thanks a lot .. please do more video mold design and solidworks plastics .. thanks a lot bro

[@CADCAMTUTORIALBYMAHTABALAM]

sure i will do more tutorial in future regarding molds & try to cover plastic parts,

[@tayebmsatra2960]

you are the best

[@kandasamyrajan]

Thank you very much for the tutorial. It is a new topic for me introduce by you.

[@CADCAMTUTORIALBYMAHTABALAM]

welcome, please share our videos which is help us to do more and more in Solidworks thanks,

[@marcnelis6923]

Nice video, very clear and efficient presentation, thanks.

[@NetzaulRios]

Useful video thanks

[@anandvishwakarma1375]

Great sir

[@ehsankhajeh729]

very good please more example mold design

[@CADCAMTUTORIALBYMAHTABALAM]

sure i will do more tutorial in future regarding molds,

[@youzheng5543]

Hello, I am a plastic mold designer, need your help, you can make a friend thing? Thank you

[@BerkinB]

Very educative, thx for the effort

[@Nuguineatru]

Very nice instructions

[@leadeeeeer]

Thanks so much ,,,you saved me a lot of time

[@abdulrahmanfahad1403]

You are a STAR 🌟

[@rishabhmittal7895]

very helpful sir

[@mddanielaraphatpromise4357]

this is the best video

[@linasan9582]

very good thanks for the tutorial.

[@rezaasgarilou6095]

That was very good.Thank you.

[@yapeshbaulraj3146]

Very clear instructions

[@samsoumoussama3259]

Thank you for the help

[@MrAlex71192]

It was really helpful

[@adm2765]

Hello, thanks for this video. was very informational! i am trying to learn how to make a compression mold for a ptfe part 👍

[@BerkinB]

Thx for that awesome video

[@panchalmitesh8088]

super and thank you

[@NatureIsLove1]

Love you bro

[@ggupta126]

sir your video is superb and it is helping us very much. sir I have a request can make a video on making a proper mold for injection molding machine. thank you :-)

[@isabelosaavedra]

Have learned much from your tutorial videos. Can you draw a pump impeller and make the inner core for metal casting ? thanks

[@CADCAMTUTORIALBYMAHTABALAM]

i will try,

[@isabelosaavedra]

Thanks. I am looking forward.

[@rodrigocryptic]

Thank you very much

[@Aftab_Baloch.]

do you have any complete training course for solidwork cam ?

[@akankshagoatfarm6874]

Excellent

[@vinaydamodharan4674]

Excellent video can u upload more videos about flow simulation in solid works.

[@MrJefferson105]

thank you this has help me alot

[@fredtorres1703]

THANK YOU THIS WAS GREAT

[@suharsh96]

can you make another video showing how to add the gates and ejection pins and all that ? Thanks

[@princessebelin]

Thank you so much. I'm eternally grateful.

[@everydayexploration4290]

Sir kindly is ka baad ka process b btaen Power Mill sa related i mean please design a product from scratch . Make a mold Do power Milling operating sequence and then produce G Code and finally fabricate it on cnc.

[@jiraiyasensei5436]

sir your videos are very helpful sir can you please make full mold tutorial video

[@gowthamanp616]

thanks, Sir it's very helpful.. how to analyze casting and how make runner riser then how to simulate molten metal flow?

[@moreiranexstar]

Is it possible to automatically paint the coincident surface of the part and core?

[@jevishvencatasamy3479]

what type of casting is it? sand or investment?

[@dheerajgavali2360]

please sir more mold tutorials.....

[@CADCAMTUTORIALBYMAHTABALAM]

soon i will make some more examples,

[@xinruhan8543]

Is there suppose to be a hole to fill? For example if I were to send this to a machinist for injection molding, how do they fill it without a port?

[@veerbhati82]

Sir, I make this button but yellow hole not convert to green hole after command use draft?

[@whatsappstatuslove5755]

Sir please put video of core split

[@studywithsherry684]

Hi if we need insect the blocks into the bottom. how can we make it

[@phillipmaser132]

How do you inject the Plastic into the mold. What temp does this process run at?

[@CADCAMTUTORIALBYMAHTABALAM]

soon i will do a complete mold tutorial, here you will see only about mold without cavity,

[@souravbhuniacreation]

good explanation of mould design...but the adds interrupt the consistency

[@MonerKothaXYZ]

Thanks

[@yuvrajsingh7742]

thanks sir ji

[@rahulnayak8856]

i think analysis has been done in this i want softcopy for it can u plz provide it

[@kaushikraval5898]

I just want to know as u made moulds for 1 button what to do for 5 button together in 1 moulds... plz make multiple parts mould video if possible

[@KasunSiriwardena]

Do you have any video here about gating and runner sprue drawing/designing for a mould? Better of with tha flow simulation

[@anitanikam7989]

Thank you sir

[@zyadhaji9838]

Thank you very much for this valuable tutorial. Just a question; why did you choose 1-degree draft, not zero degree draft? thanks again

[@CADCAMTUTORIALBYMAHTABALAM]

for the success of any mold you need minimum draft otherwise how your product comes out of the mold,

[@vinaygaur9958]

sir , kindly make 3 plate mold design in solidworks .

[@akhileshprajapati8843]

I have a jali basket model but i have no idea for creating punch please help me

[@gadeer8707]

Anyone know if I can do the opposite? I mean making the mold to create the form

[@ArunKumar-vh2jk]

+CAD CAM TUTORIAL - Sir, Please Let us know after the Mold Designing process, how we make it in real-stick like machine process after designing , Thanks

[@sudhirk5186]

In mold design.. How we need to give runner and riser..

[@vuvu6024]

Can you help me answer the solidcam no need to install or be available in solidworks??

[@CADCAMTUTORIALBYMAHTABALAM]

Dear friend still i am not using Solidcam but i have future plan,

[@markobog800]

Is it possible to model and animate 3D machine for the production of rivets (for example)? So, I draw all the key parts of the machine (press) as well as the wire (working piece), then let the machine "work" and make the rivets. So, I play animation, and let the 3D machine made rivets from the wire by itself?

[@sengundharbalakumar445]

Thank you sir.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks & please Share our Videos,

[@ACota-dk9qw]

Great tutorial, still needs a sprue tho and if you're going to make more than 1 button at a time in one mold then you'd also have to make some runners and do some fluid flow analysis to ensure the fill rate is even for all cavities given the mold layout. Anyway, I'd be interested in more advanced tutorials :)

[@bablusharma2728]

What's the difference between parting surface and a parting line?

[@Traveldhaba]

plz more example for mold designing.

[@poyyamozhiankiruttinan5107]

best

[@hiteshram3375]

Good videos but plz creat material inject tube....

[@maheshmaahi9944]

Sir iam asking how break core and cavity mate relation because we have saparet core and cavity

[@maheshmaahi9944]

Please reply

[@sohan2510]

Isn't the melted plastic runner automatically generated by SOLIDWORKS ? Or it needs to be manually done ?

[@tajammalnawaz5552]

what would we select the parting line of unsymmetric part?

[@madhavrale2518]

Why does my part(core) disappear when I draw sketch for the mold (cavity) dimensions and exit? The tooling split menu appears but I am unable to select core & cavity? What could be the issue?

[@yunusemregok9863]

hi, I'm using solidworks 2018. At draft command The program doesnt accept the 2 degree , but 3 degree is okey. What is the difference between 2 and 3 :D?

[@lagdance]

how come there is no spruce or gate in the mold design?

[@vdope1520]

how to make pump casing in solid works?

[@CADCAMTUTORIALBYMAHTABALAM]

i will make tutorial on pump,

[@vdope1520]

ok ty i m waiting for it...,!!!

[@ryancameron1610]

The draftxpert didn't work -- I followed the instructions, but the yellow holes remained yellow after clicking ok. How do I resolve this?

[@OmotayoAyodele-pw2zf]

hello, I experienced the same issue too but now I have been able to resolved it. the problem is when you open the draft analysis, the draft angle was not 1°, mine was in 3°, but when I change it to 1° ... it works

[@blockhd]

Hello, what do you do for living? Would you be willing to move to Europe to work here as a mould designer for Rubber part producing company?

[@blockhd]

Also you are a great teacher but your "indian" English is hilarious :)

[@ketan247]

How to add for multiple cavities in one single plae

[@bapasitaramvejagam]

How to eject the components from mould????

[@cadcamshikhsha8149]

thx sir

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks bro i hope you enjoyed, please share our videos,

[@mixmasala8072]

👍

[@Jono.]

Doesn't work for me. When I draw my center rectangle before the tooling split, the rectangle simply floats above the button

[@fischermann5279]

just for once I would like to see a tutorial like this and be able to understand what they are saying...

[@HaIPeHaOP]

lol, he speaks very clearly, nothing to complain about

[@mayurbandal5965]

how to fill molten metal into mold

I have a problem, when I apply this the colors disappear, does anyone has the same problem?

[@YogeshKumar-xq6ze]

Sir mere software ma cavity option on nahi ho raha