Excellent . Please make more tutorial on plastic part design and mould flow analysis . Best Regards
@diegomora1294 Жыл бұрын
Hello, very nice video. I have a question: does this program makes the runner the minimun necesary for filling the cavity? I mean, lets say that at the initial step of assigning dimensions I used a cross section too high, will the program correct that cross section so that the runner will be as small as possible, or it is a manual process and I have to use results parameters to see that ?
@salahhasan13657 жыл бұрын
Great Tutorial !
@rashidusman34173 жыл бұрын
Please making for more video mold flow analysis in solidworks 2020 version...
@MinhDangcraft4 жыл бұрын
Awesome video! I wonder if the same theory can be applied to casting with risers for home use.
@goengineer4 жыл бұрын
SOLIDWORKS Plastics is best used with plastics/polymers, and isn’t recommended for accurate predictions of the casting process. GoEngineer offers another product, Altair Inspire Cast, if you’re looking to analyze the casting process. Please check out our website for more information! www.goengineer.com/products/solidthinking-click2cast/
@monsterjesse4 жыл бұрын
Most excellent
@talgtalga37673 жыл бұрын
Hi great video...which format better to run from Rhino5 to solidplastics? i did exported from rhino to solidworks pladtic step format and am trying simulation but no chance there are some toolbars switch off some buttons cant click and activate to create runner and other required toolbars ....any help will be greatly appreciated.
@goengineer3 жыл бұрын
First check the license you have access to - runner design comes with Plastics Professional, the middle license. www.goengineer.com/solidworks/simulation/plastics#matrix. It’s possible that you have Plastics Standard where runner design wouldn’t be allowed. Secondly, check if that STEP file has imported as a SOLIDWORKS assembly (.sldasm file extension). SOLIDWORKS Plastics doesn’t work with assembly files, and only Plastics Professional and higher work with multi-body parts. If your STEP has imported as an .sldasm, do a Save As to get that into a part form. If you are using Plastics Standard, then use the Combine feature to merge disparate parts together. If this doesn’t help, it is likely too difficult for us to troubleshoot through comments. I recommend you reach out to your local reseller’s technical support line for a screen share.
@talgtalga37673 жыл бұрын
@@goengineer Thanks for clarification i sorted out but i have other question.. i set runner system and simulated looks like the injection simulation was ok smoothly and covered everywhere in plastic part..and i tried to use balancing runner it canculated automaticlly and run as normal simulation ..i saw some video which balancing runner it corrected runner size each detail automarically od of runner changed aoutomatically.. iny case i have two parts and no working balancing what i should do or what i did wrong...your help really needs and appreciated