SolidWorks Tutorial # 310: Robotic arm (layout design, mate controller)

sw-tc.net/#310 solidworks tutorial robotic arm (layout design, mate controller): additional used parts in this tutorial:
-Gripper2 Tutorial #308: • SolidWorks Tutorial #3...
-Servo Motor Tutorial #302: • SolidWorks G Tutorial ...
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
SolidWorks Beginners Tutorials
SolidWorks Sketching
SolidWorks Surface
SolidWorks Weldments
SolidWorks Assembly
SolidWorks Drawing
SolidWorks Sheet Metal
SolidWorks Mold Design
SolidWorks Simulation
SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

[@jonasaskenobis]

The servo motors here are SG90, in case anyone needs the exact model

[@eggalatarun6061]

I need

[@makelmaktas9554]

It will be amazing if you can share jpg or pdf of techical drawings all that kind of projects so we can try to do ourselves first and after we can check with you

[@3dcommercialkitchens771]

Me following every single step, even when he makes a mistake...

[@lucarutigliano6539]

Same bro ahah

[@abdurrehman2179]

can you tell what he did in between 2:40 to 3:00 min???

[@manabbera2244]

@@abdurrehman2179 he perpendicular the rectangle with the center of the circle.

[@diegoorellana2170]

Nice tutorial. I would suggest, inside the layout environment, to convert (to project) joint points of the linkage to the respective sketch of each part in order to reduce the risk of rebuilding problems when moving the layout at a different position. Bear in mind that you have to select the points belonging to the layout sketch, not those belonging to the other parts within the assembly. My reggards.

[@OpenFOAMbasic]

What an amazingly elaborate task. I think it's great to make a video like this. That's awesome.

[@youssefsellami2707]

kzbin.info/door/YnB_2NaqPhzgHeO0tP12Ng&fbclid=IwAR0d1lfzFE2lPSkFQOR8UcmHJy7yWm0ubuppCVq1z19rBObNxDIJeQo6g3Y

[@Mechanical.Design]

Welcome to our channel, let's learn Solidworks & Catia v5 through complete tutorials !!

[@Ashutoshkumarchaubey]

AMAZING "I SALUTE YOU FOR THIS PROJECT" ,THIS IS VERY IMPORTANT FOR ME.

[@vithlanibhargav9643]

sir thanks for your great efforts to bring best for us. One small request, sir can please make more videos on solidworks simulation. Thanks once gain for such an amazing work.

[@RangavittalaSR]

Hats off Sir, Finally I got solution here

[@vietanh4369]

this video amazed me so much

[@roger72715]

Extraordinary effort! Keep going..please!

Amazing good job

[@ct8463]

i thought it was only 4 hours... why did you do this to me man. I am dying now rip. my friend is crying

[@cybermascot]

Excellent video:)

[@LovePaPa93]

Amazing

[@TutorialSolidworks91]

very nice tut, thanks so much

[@muammarfaruq9054]

very good video , thanks for your tutorial ,

[@bishansinghrawat6756]

How is part [T310ex servo(1)] is made at timing 50 min.... Need some video.......

[@marioc39]

i believe this is tutorial number 302. might be scaled differently for anyone else wondering this like myself. I am still going through the tutorial.

[@yashojitbhaumik6012]

Can you share a link for the drawing

[@alvarogarciamartinez8507]

Excellent Content!! But there is a missing mate not shown in the video at 58:22. But still excellent work

[@asharharoon6899]

is it the one between the servo top and the bottom ring type?

[@mohammedalmujtaba7079]

@@asharharoon6899 yes bro. How can i do it

[@SamsAziz_NilTheBluefish]

Amazing work. If you don't mind Would you please share the blueprints?

[@lolTeos]

Awesome. It's a great project

[@duongnguyen7874]

thank you so much, so helpful

[@thanhthuyennguyen2997]

Thank you so much !

[@joshuachan2097]

Great Video, but it is not completed with all the screw in place right? I can see a few hole did not match with any screw and some of the screw is not connected with nuts right?

[@praveenchaurasia1823]

very useful video but at 31:25 you have made a mistake in dimensioning.

[@user-yj7tj4mf2tv]

The base moter must be tough，for its bears need hold the up arms of robot arm

[@manabbera2244]

please try to mention material used for every part.

[@jq7087]

You are the best! I Love you!

[@mohamedsadokboudhraa7964]

Good brother keep going

[@usmanganimeghreji2551]

Plz share me with...pdf file of all parts with dimensions

[@jimenezvaldinjesusangel4687]

Exelente video!!! Sigue asi

[@ricardodarwin168]

*olá amigão, você sabe brilhar a peça no solidworks?? valeu!!*

[@jeanfrancoislentillon4239]

J'ai commencé à suivre le tuto en pensant que vous étiez sur Solidworks Student mais apparemment non car dans ce dernier il n'y a pas la toolbox pour incruster un roulement a bille, dommage la robotique m'intéresse beaucoup. A bientôt peut être

[@matteopaiano7434]

That's great, amazing, exactly what I needed! Just a question: I've been told screws, nuts, bolts used for the tutorial may not be included in the student version. Is that true?

[@o3024]

matteo paiano yes. Students version do not come along with toolbox feature.

[@thaisonngo9799]

Can you share me 2D drawing ?, thank you

[@KBhushan619]

Amazing work! would you mind sharing the blueprints?

[@lorvistrejo2753]

Do you get them??

[@jagatutor]

Good amazin skill for tutorial I like this one 😎😎

[@kl7421]

Did somebody done it ?

[@manschebani8586]

Merci beaucoup frère ❤️❤️

[@nirotchannel4945]

awesome video...Thanks

[@dimitrispindoglou570]

Excellent work! do you by any chance have the dimensions from the whole layout in dpf form or similar?

[@AKSHET-hh8dh]

Can you please Tell me.. How many Degree of Freedom are there..??

[@Sw-tcNet]

5

[@AKSHET-hh8dh]

@@Sw-tcNet Thank you So Much

[@TranTran-ko7bl]

fantastic!thankyou br! but i can't draw the t310ex servo, please share file cad t310ex servo.thks!

[@abhijithnandakumar2071]

You are amazing....❤️

[@jagsproduction]

Quite helpful ❤

[@Water-Melon162]

hey!man,i really want to know how do you get T310ex servo in solidworks? you got it in website or another ways? let's me know about it? Thanks

[@emirhanguney3885]

hey bro did you find anything about how to get T310ex servo?

[@alirezaasakereh3720]

thank you for helping us and shareig your amazing works...I"ve done and imitate all movements,but my servo motors don"t work together,I mean two servo motors which are on the arm don"t move.I even disslove"em but they didn"t moved....HELP...please

[@ahmedyasir626]

i feel you brother, in the same situation

[@galaxyshop9802]

Dear solid work kindly teach how this animation works in real robot aurdino or plc robot

[@halita.4021]

Hello from TR. Thanks for sharing this amazing project. I have a trouble here. Where can I find T310ex servo motor's cad model. I couldn't find it on 3d cad websites. If you still active on your channel, please help me. Thank you.

[@eggalatarun6061]

can you share me the print

[@jatanlimbasiya3018]

You are GREAT !!!

[@tatkonerez]

Anyone know how he pans the camera so smoothly? Mine is super choppy when I use the arrow keys in Solidworks.

[@mohit-tx9kh]

Could u please share the types of servo that u r using

[@lukeha4462]

Good job

[@NabilZouhir]

Amazing project. Would you mind sharing the blueprints? Thank you in advance

[@elayda93]

how many parts does this have?? i need 35+ parts for my project

[@vatsalmandlesara71]

this is not fully understandable ........ while making there are so many things which are not shown properly

[@omararab6995]

please sir I need a pdf book or a page on the internet that has dimensional mechanisms so that I draw the mechanism and practice assembly and motion analysis Thanks in advance 💙🌹

[@nazmeke2429]

Can you calculate the degree of freedom of the design? I would be glad if you write as a comment.

[@sandeshathreya1854]

Its a good video, can you please share the dimensions of all parts

[@mohsenabdelaziz9476]

Thanks alot

[@omkarkumbhar5765]

Also provide part drawing so we should try

[@sumilsood8081]

Can we download these parts?

[@fahadsa7761]

Thank you Kindly i need the blueprint

[@lombarekbenflis585]

Please make formation for CAO

[@umairsaeed6501]

Which version of Solid-work used?

[@aldohernandez6724]

Hola no tienes tutoriales en inventor para este tipo de brazos¡¡¡ saludos

[@xaieuanhhung4249]

thank you

[@Yorgojadam]

From where did he got the gripper

[@rongweiliang8704]

Can I get this？Thank you very much！

[@slash_8519]

where can i find the servo motor? pls

[@Sw-tcNet]

kzbin.info/www/bejne/rpaYZ6RvgZeZrLc

[@brn6876]

HI ser ! i would have drawings of parts to practice Modelaysing this robot if it's possible

[@subhamkumarshah6664]

Without sound it's difficult। Please add your voice of steps you use। Then make videos। This is very difficult to see cursor moving

[@loganmartin5494]

pleas reply so i can finish this tutorial but how did you do the stuff at 2:59:06 because I cannot create the circles on the face using the circles from a previous sketch

[@vineethguda7562]

Sir , my scaling for dc motor is getting 1 by default , but as you had value 4 , how should I proceed for scaling sir ?

[@el_xZx]

hello, can you share the dimensional drawings?

[@pritinarwade4393]

Can you please share drawings of each part

[@antonioortiz3421]

Exelente tutorial xD ☺☺

[@CoreySmith-ph3fj]

I'm going to be closing factories and making everything free asap

[@Solidworks_Tutorials]

So great robotic industrial. Thank for sharing

[@anilciftlik2413]

awesome

[@dharaparekh2905]

can I get the dimensions file. so i dont have to replay the video everytime i miss the dimensioning.

[@oswaldojose790]

Do you Have This project completed in 3D?

[@Илья-о3е9е]

Hello! Playlist sounds please!

[@jamypad5251]

how many pieces does this model have?

[@piyushthapar7217]

please can you tell me on what basis you have used these dimensions ?????

[@Yorgojadam]

Help where is the gripper file

[@maximecrouvizier9871]

Hi y have a student edition and I can't use toolbox have you solution for this??

[@3D-Typist]

do you know somthing? I Love You!!! u help me vary much!!!

[@batuhankaraduman7622]

Vary ? 🤣

[@brahmiamine8609]

how can the servo body turn ?

[@Greco1114]

Which graphics card are you using?

[@carlos.madrid]

kzbin.info/www/bejne/e5-4faWXrN9rfq8

[@krafjr]

Excuse me, do you have the project plans that you can pass me? Please

[@ericfabian553]

Nice video. Do you mind sharing the orthographic projection of the robotic arm?

[@otuahbekoe8625]

how many parts in total please

[@nivansYedragon]

Will anyone have the plans?

[@MrYFM2]

what's the title of the track used in the very beginning of the video?

[@ohmaros]

C'était long, mais on a réussi 🙃🤖🦾

[@kaveeshjayasuriya4296]

is there a dimension file for this project? if there please let me know the way to access it.. thank u!

[@gsailenin1760]

Update solidworks files link

[@aliseylani3221]

Where can I download it? or buy it?