SolidWorks Tutorial

[@MythicGuitarCompany]

2 years ago, i would have been so lost. This would have been so far out of my reach. But thanks to videos like this one, 2 years later, i see this same video and think "oh, super easy! cool, i like how he did that, oh, that's a new move. ok he's going to shell it... yup..." etc. what i mean is....... thanks for the video. videos like this helped me to get a career in engineering for manufacturing.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@piotergaming6533]

You took the words right outta my mouth.

[@christiancelis7832]

Muchas gracias por compartir tu conocimiento. Sin duda realizas excelentes tutoriales. Y para las personas que se quejan, es porque son tutoriales para personas que ya saben ubicar las herramientas y manejar el programa más allá de un conocimiento básico, uds deben de ver niveles básicos y aprender antes de querer realizar este tipo de modelado, en lugar de estar insultando al maestro. Me parece que no necesita explicación de forma hablada, la botella me salió a la perfección. ¡Gracias!

[@kiubiz3942]

Thank u for being a great human being and taking ti to help all of us noobs out cheers

[@zhongyisu3113]

No sounds but very clear. Thank you, I followed your steps and made the bottle in one hour!

[@2minutetech899]

you can see this video kzbin.info/www/bejne/qn6QdJawfbembsk

[@scobius1]

Dan Lavoi's Lamborghini Galardo tutorial series is the go to for solid works learning!

[@iamcomputerfixer]

Clever Annette. Thanks Derek & happy Christmas.

[@priyanshurai5939]

beauty of design reflexes through your art

[@BeWithWasif101]

Congratulations for 300k subscribers sir

[@OtodidakSolidWorks]

Wooow .. I tried to make the design, but I couldn't do it as well as you. Simply put, it would be excellent if your film included an explanation with sound and subtitles. In any case, it's a terrific practice for aspiring designers. Thank you for sharing, friends. I will be waiting for feedback from anyone who would like to, thank you.

[@silasgoma1686]

My geometry does not twist all the way around the helix like yours does @24:00

[@I-TingYen]

That's bc the starting point for the helix curve is not same as the trapezoid he drew on 22:57, you can try write the degree to 0 or 90 at 22:36(when you are creating the helix curve)

[@michaelzajac5284]

Dear Solidworks Tutorial Use to set the image display quality options: Click Options or Tools > Options > Document Properties > Image Quality. It made smooth circle.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@michaelzajac5284]

Dear@@CADCAMER , This is fascinating. I'm surprised you are here. I didn't hear music, I am deaf.

[@superfreshbiltz]

Now I feel like I have no clue how to use solidworks anymore.... after seeing this.

[@kushagraroy5081]

Checkout kzbin.info/aero/PLms4SjOtNO2OUZ8k_TF7wpBCPQJiwKYVy

[@CADCAMER]

Watch my video also of same topic uploaded today. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@leo-yw9ok]

I use SolidWorks to complete the modeling, the rendering effect in the video is really good, I hope to learn the skills of model rendering. I come from China, English is not good, with the help of automatic translation software to communicate with friends

[@daemonsecrest1655]

Whenever I try to do that 8mm fillet at 25:12 it removes the swept surface

[@cadcaetutorial2039]

cola bottle explain very nice sir

[@cadcaetutorial2039]

this tutorial is very nice sir

[@bambambooyaaj6239]

If you just play with 3DSolidWorks on a daily basis for like 1 hour a day then you would understand everything he does. Had to learn this software by myself and I can comprehend his steps well.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@a.4ziz455]

sangat membantu utk yg msh pemula tapi saran saya alangkah baiknya gambarnya di perjernih lg sehingga text kecil bisa lebih jelas terbacanya... trimakasih

[@anlduzgunsvac5146]

Any tips? I’m a newbie learning

[@quangnhatle2512]

Even with no sound but a nice tutorial, I learned a lot. Thanks

[@boscocq8188]

Could somebody tell me what do you do to see the pieces shine like that? my pieces are always opaque, I want some pieces to shine but without rendering them

[@silasgoma1686]

How did the material color change @12:45?

[@quantumfreeze257]

I'll get back to this after I catch up on all those network engineering video's

[@jon4571]

why i can't fillet like in 25:10 ? Error Fillet33 Failed to create fillet. Please check the input geometry and radius values or try using the "Face fillet" option.

[@piessika]

+dani ren Me too mate, in my case, it's possible though. But I get this thread around neck empty from side faces (yes, it sounds funny).

[@piessika]

+Majkelson Small solution! Decrease the radius of fillet to 6 mm.

[@semihaksoy8182]

Sir, What is the differences between solid modeling, surface modeling and sheet modeling? Please answer. Thanks in advance

[@micanicaadel9511]

je te remerci sur la qualité du travail, moi aussi j'ai une chaine youtube pour debutant sur solidworks, merci encore une fois. I thank you on the quality of work, I also have a youtube channel for beginners on solidworks, thank you again. أشكركم على جودة العمل ، ولدي أيضًا قناة youtube للمبتدئين في Solidworks ، شكرًا لك مرة أخرى

[@2minutetech899]

see this videos kzbin.info/www/bejne/gn6nqGWCh6x4gpo kzbin.info/www/bejne/qn6QdJawfbembsk

[@rackball8487]

Awesome video and great skills! Thank you very much for the tutorial!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@karimgadelrab7027]

Work of art!!! very well done.

[@over-playyt9123]

sen fou

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@al-aminislam7854]

the fillet at 18:30 is not working, if u have any explanation or solution plz

[@huanganda1128]

Thank you very much, I learned a lot of knowledge from your video, this video is very valuable, I fully recommend.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@usuariosolidworks4509]

Excellent video tutorial. Thank you so much for sharing it!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@colbster12302]

right at 23:47 couldn't you have added a intersection relation instead of re- dimensioning like a n00b

[@Itz_str4wb3rry]

I am amazed! wonderful job and use of skills.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@cebe-kv]

It works just perfect after your help. Thanks a lot

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@FrenchieYang12]

At 14:55 when you created a plane for the bottom cut of the bottle... for some reason every time I created that same plans... the coordinate system flipped and isn't set the same as yours? I'm a little confuse... yes I can find ways to flip the extrude cut other direction but just to be precise on the same step as yours... please give feedback

[@iTHeo1]

Same problem... and I can't change the directions of axis

[@islamicchanneltv1088]

bro i your work is awesome but ur add is so awesome i watched your full add

[@ahh59823]

were is a program i need >> link dawnlode a pregram were is ?

[@ambedkarkumar9045]

at 2.24 ....what is the shortcut key for "make tangent" option? can anyone help?

[@junjizhu6294]

May I know how come all of a sudden your "Fillet 1" feature is gone at 13:43 ?

[@neoseeker02]

Yeah, it was questioning, but I think they probably did another recording or something while editing this tutorial video, which is why they had to redo the fillets at 13:43 even though they did it earlier in the video.

[@pateldevang6198]

Great work.

[@atakanugur1780]

How did you make polish surface ?

[@mrs.marys.travelers5962]

Thanks for showing.

[@haftir]

Hi, I was wondering ; how do make the surface always shine like that. In my solidworks, every extruded part is dull, not shiny like yours.

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@ZohaibAli-oo6bh]

good tutorial, one question about soft recording. How do you do it? lol

[@the-tribe5921]

Great tutorial. Thank you

[@darkopecanac1807]

Sine hvala puno, olaksao si mi.

[@HaseebGlobalTV]

very good, this is amazing creation

[@anajlineve4437]

Every time when selecting guiding curves for lofted boss base, it says "guide curve is invalid. It does not intersect with section." How to solve this problem?

[@Sabertooth93]

Check if the guide curve intersects with the sketch or not. If not, then use the pierce function to make the guide curve intersect with the sketch.

[@xl000]

How does this help to manufacture an actual pop bottle ?

[@romeoxlove]

where I’d record one track of the soft and than use a second Edison to record scrubbing through the soft to mimic a wave table.

[@PieroStuff]

Are you following some sort of blueprint? If yes, where can I find it? It would help to give more sense to some of your moves. Thanks :)

[@DarkWhisperer13]

This is very good and thanks to you. This is a great skill and very good video. Awesome, again thank you.

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@mustafaalhusaini8342]

Impressive ! great work

[@Huy-ed2re]

Holy crab! this is how it's done! *all thumbs are up*

[@shehzadkhan7570]

using thread function directly will make it easy in last part

[@cokedupnormies2651]

Can you make an assembly where there is a bottle.cap that can be rotated off?

[@Sw-tcNet]

exactly what you want is here: kzbin.info/www/bejne/mWKvkHauZcypjpI

[@danielasirianni1426]

My opinion again: wonderful for us! Again: wonderful!

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@dipanjanpal9305]

why dont you guys add audio and maybe just slow it down a little. its difficult for beginners like me to understand without a guiding audio specially when the steps are so fast

[@munnimann]

+dipanjan pal You can slow it down by setting the speed to 0.5 in the video settings.

[@brandonSaintVIItaul]

yeah where is the sound? explanation of tool usage?

[@dapoopta]

I just started doing some tutorials with voice overs on solidworks. Trying to go slow... but it't challenging sometimes :-)

[@francisco_meza54]

to draw fast you need to do, you can not copy ... you must do and think yourself, to draw well?

[@pakan357]

Start by learning easier objects... Common sense.

[@Qwerty_c]

Esto seria nivel DIOS 😎 impresionante manejo de SW cuantas horas le dedicas para manerjarlo asi?

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@mosta7050]

you're awesome man keep goin'

[@ctm8k45]

hi STC, pls guide me how to make the extrude block look sparkle like stainless steel (like the surface of the coca bottle that you are drawing)???

[@annaveselova]

Great tutorial! Thank you!

[@Sw-tcNet]

Anna Veselova Many thanks to you Anna!

[@spencerferguson6227]

***** you are mean

[@spencerferguson6227]

***** k

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@BASHACADEMY]

What is the software?

[@alfredomartinez6645]

Hey, man.. How do you change from line to arc like in 0:45?

[@SuperShisto]

Same thing i want to know

[@febabhi]

Just press A when u click for endpoint in line command, you will automatically switch to Tangent-Arc command. Ain't this super easy!!?? :)

[@demetreyoung8044]

I'm not sure about the "A", but notice when going back to the previous end point the yellow dot appears, that does it.

[@2minutetech899]

see this videos kzbin.info/www/bejne/gn6nqGWCh6x4gpo kzbin.info/www/bejne/qn6QdJawfbembsk

[@4jAWorship]

My GMS (app) softs different. Why?

[@РешитовРенат]

Очень круто, спасибо за переданный опыт

[@LynDalesChannel]

what version of solid works is this?

[@kopo9499]

Awesome video thanks

[@tds_FrankOfficiel]

my bottle doesn't work, my sketch do not want come in the blue, but the pire want come in the pink, i dont understand

[@guilhermekripka]

at 14.48 the axis are inverted and I do not know how to invert them, the plane seems to be upside down, can anybody help me?

[@danielasirianni1426]

Sensacional! Imagine um trabalho sem defeitos!!! Wonderful!!!!! Can you imagine one work without problems and without strakes? It's this work. Perfect. Thanks to show me another development of the best technology of the world: a technology of the UNITES STATES OF AMERICA!!!!! With no problems and only success.

[@mxozone]

KKKKK mamador de americano

[@usuariosolidworks4509]

Nice job!

[@tomseim]

The links www.sw-tc.net/ and www.sw-tc.net/#181 (which should contain the SW part file) go to a site that have a banner, but nothing else. Is this site under maintenance or is it broken?

[@lhermine9256]

Never realized fillets had such UNLIMITED POWER

[@AnONYmouS-my3sl]

Lhermine kzbin.info/www/bejne/rIWlo4KerZiopJo

[@lhermine9256]

@@AnONYmouS-my3sl noice

[@AnONYmouS-my3sl]

Lhermine kindly subscribe

[@SuperdaMachine]

Perfect design

[@alisan-school]

❤❤❤❤Excellent ❤❤❤❤

[@kentaro1340]

Nice work. Thanks a lot

[@Sw-tcNet]

Bảo Nguyễn Thanks Bao!

[@2minutetech899]

you can see this video For more experience kzbin.info/www/bejne/qn6QdJawfbembsk

[@moisessosa8112]

Ayuda, ¿como puedo colocar la punta del arco en la tangente del circulo? Helpe please, How I can put the tip of the arc tangent of the circle?

[@cadcaetutorial2039]

next lecture is comming soon sir

[@12345LUU]

Nice video! Thank

[@ossamahareedy562]

damn you dude XD i thought my speakers were out of power and i was f*** made then discover this

[@CADCAMER]

Watch my video also of same topic uploaded today with added music and subtitles. kzbin.info/www/bejne/eIrNnnd7jLhqqLM

[@DanielAndradaCDI]

Excelente demostración!! Felicitaciones y muchas gracias!

[@leangengaleadsit7299]

Thank you!

[@WahidFayumzadah]

How to do the chamfer when you make a swept cut ?

[@EatmaKnuts]

I know after 4 years it’s irrelevant to you, but to anyone looking for the answer like I was, do not forget about the angle that is at 10 degrees. Mine was default 45

[@victortung7286]

Great Video!!!!!!!

[@gustavos5269]

what did you do in 12:45?

[@Li-it8rw]

so good!

[@asiyeincekara8443]

Why is an environment like a kitchen reflected on the mirroring material?

[@karbanatek99]

Great job!

[@kaduussie]

Which music? Who is the performer/artist?

[@Rasyonel_Pisces]

Very good tutorial! thanX bro

[@cd2012rom]

Why it is silent????

[@nazikmohamed]

Hello sir,This video very helpful for our Design Study.Thank yo

[@kumarshubham2571]

how did you make the body hollow

[@AnONYmouS-my3sl]

kumar shubham kzbin.info/www/bejne/rIWlo4KerZiopJo

[@Hirudin]

Wow, nice! Thanks!

[@unodernier]

Hirudin

[@miz249whbbeo]

this is pretty cool! gonna try it out , hope it works! thank you

[@francisco_meza54]

This Video is Great? What is the video that you like the most?

[@adicohen1763]

what was the function of the split line at minute 8-9? could someone please explain. very helpful video thanks

[@tomwebb3016]

I know this is late, but it might help other people too. This is used to trace the circle drawn at the top over the uneven surface of the cut underneath.

[@erikponce2829]

haces simulacion de flujo de aire? Si conoces a alguien, recomiendalo, me urge.

[@indaywarayvlogtv5092]

Kaya tayo lumolusog sis lagi tayo sa kusina😁