SolidWorks Tutorial

[@plinsavi]

You have to change the dimension of the bigger hole from 76.2 to 63.5. There is an editing cut in the video that doesn't show that he changed the dimension. In 1:51 you can kind of see that the new dimension is 63.5. Like this comment for people to see it.

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@ivanarais5266]

You should not change dimensions without warning, Rectangle on 4:00 doesn't fit.

[@Niels_f2704]

I get stuck at this part all the time..

[@automatix09]

@@Niels_f2704 watch the second arc at 1.53min..he changed the dimensions to 63,5mm from 76,2mm

[@amigohermanoful]

@@automatix09 thanks bro, i thought any other solution :)

[@VAB1990]

the second arc Dia is 63.50 mm, you can see it at 1:53 If you look close enough. And the (intentional) mistake propagates in piston rod cap which you can see at 7:17. If you miss them the first time, the assembly will not match and then you'll know it either way.

[@automatix09]

thank you man. Made my day :)

[@shrutishgadakh2889]

Thank you so much. That really helped

[@I-TingYen]

Thank you so much!!:))))

[@kruger1932]

Has anyone figured out the fix for the rectangle cutout not fitting at 4:00?

[@capitaocavernadobras]

Parabéns. Ótimo Trabalho. Obrigado por compartilhar.

[@yancasanova3226]

thank you for existing man, I appreciate this quality content!

[@manikandans9326]

dimensions details want to draw alone sir

[@eldarm28]

Hello friend, do you have a 2D technical drawing of theese parts with all dimensioning, I would like to practice on my own and use your video as a backup help :)

[@shikunchen8523]

Hi, First of all thank you for this excellent video. But I found on 4:00 the Rectangle doesn't fit. Did you change the dimensions? Please share it! Thank you very much

[@shravan2926]

n

[@brianillsley4376]

Shikun C

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@simatmakina2963]

BRO... YOUR USE'ING SOLIDWORKS EXCELLED WORKS.. VERY. VERY NİCE HEAT. THİNK....

[@djbram]

there are quite some mistakes in this relatively easy assembly, the maker tried to correct some of these (in this video allready) but it does not make it much better. So pay attention while drawing the part where the pistonrod and cap meet. They should be exactly the same (if done correctly, the fault with the rectangle should also resolve itself automaticly). also some fillets do not realy add up in the final assembly. then again, nice toturial!

[@XxechelonxX]

Hello I am a Mechanical Engineer currently practicing in my free time with Solidworks, I did my Senior Design Project with this software and I love it, great videos you have here. I was wondering if you had plans (or blueprints) to share so I can practice 3D drafting. Thanks a lot

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@omarisaachernandezpatino4804]

@@kushagraroy5081hi, please, could you send me those 2D drawings?

[@suteal]

Fabulous Tutorial easy to follow what more could you ask for, there is only one question what is the reflection map that you are using. Thankyou Alan

[@alexbeachy942]

hey dude, awsome videos, oh and by the way instead of clicking normal to all the time you could just ctrl 8

[@TitovIgorBro]

Holy crap thank you dude

[@javierespinosa1643]

impresionante como manejas el software! felicidades y gracias....

[@MrKreker95]

on 1:25 diameter 76.2 It is not right , there is 63.5

[@Sw-tcNet]

Jhon Kreker 63.5mm is the original! But one them can be right depending on how crankshaft pattering direction was chosen.

[@MrKreker95]

SolidWorks Tutorial ☺ Ok. Thank you for reply.

[@43eburashka]

SolidWorks Tutorial ☺ But, if you make a radius equal to 76.2, the sidecut will go beyond this circle, and we can not do it. I mean sidecut, which we copy at 4:30

[@francismanalon]

+SolidWorks Tutorial ☺ sir all of your videos are great!! btw, can I ask if the dimensions in all videos here in Engine Project is exact? If I follow all of these dimensions, will it perfectly fit in the Assembly part? If not, can I ask how to get the blueprint copy of this project? Hoping for the reply soon as possible cause I badly need one and I found these videos super helpful, thank you in advance sir!

[@sojanprajapati5217]

Bravo man!! Thanks for your comment!!

[@matthewalger8380]

I get this is probably for advanced users. This is a great tutorial however I find some of it to be quite jumpy and i have had to figure out, based on experience, what you are doing. A tutorial slightly slower with some written text/or at least some audio over the top would be beneficial to a lot of users it seems. Nice job though.

[@emanu1674]

1:25 Do "63.5". "76.2" will NOT FIT

[@mohamedsultan99]

thanks bud, ur a life saver !

[@abdulrehmanraja8638]

Love you dude. Thanks sir you saved my grade almost

[@supercartech5885]

Thank you dude.

[@solaaar3]

Thanks, i have completed the tutorial.

[@mikebarbera254]

i was doing this tutorial when 8:27 i realized i had been using inches instead of millimeters and that messed the hole* thing up. *see what i did there?

[@thebrownmamba7707]

lmao

[@rinkumahawar3699]

sir,what is the dimension of long side of centre point Rectangle?

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@simatmakina2963]

07.25 - 08:18 BETWEEN HEATSHOT.... VERY NİCE.....

[@waquarkhan5180]

Hey sir Can u please send me 2d drawing of each parts of v12 engine please

[@sairocadiz9571]

Greetings, all your videos are so usefull thanks for all of them, I just want to give you an opinion about do a little slower parts where you pick an option to make any operation , because Im learning this software and i dont know all the commands, in all the left is everything ok, Bessings

[@jaekib]

I'll use your comment to help others. For anyone struggling with which commands are being invoked, pause the video, back up a bit and look just at the top of the browser-like command history on the left. The command will be shown there when active and recorded there lower down when the command is finished... For example, Fillet is picked repeatedly to finish the part. That will allow the user to come back and edit each fillet separately later if modifications are needed. Cheers.

[@muhameduzunalic1058]

One question sir,how can the center line be 150.40 in length,and the longer line of the rectangle is 176,and yet the center line is longer than the lenght of the rectangle.This appears in the beginning of the video.

[@leopinto8714]

Muhamed Uzunalić tienes razón no coincide diferentes dimensiones

[@xBlackThoughts]

interesting video. But there are too many cuts that do NOT show some things. That's too bad!

[@nguyentung5440]

The color is so beautyful!!!Can u help me how to make color similar it?

[@marreddyvamsi9063]

Activate real graphics view it may help(if u r graphic card supports)

[@omkarnikam1143]

Sir will you please provide the 2d drawings of the same for our practice? Please reply...

[@kylewelch1927]

I can't get the extrude cut at 8:15 to work right. It's like the Extrusion isn't long enough

[@mariopizzarelli8184]

8:32...is anyone know the dimension of the hole wizard?? thx

[@marcusaurelius3439]

Just select "cylindrical head screw" in the type voice

[@cramemichael2023]

The video is confusing. You change the dimension without any notice. Very unproffessional.

[@yasenzahar6178]

What is the dimensions of the first rectangle at the beginning of the video?

[@amyjack3853]

hi, do you have a document of this? can you give us? please,

[@rohanangne1977]

If you get the document send me on [e-mail]..please

[@diegogabrielmega9220]

have file pdf of the detailing and measures

[@pinakshukla5632]

can you share pdf of all the 2d drawings?

[@nargasliman961]

Can you please provide us with the 2d sketch

[@GuilhermeOliveira-ly1fq]

How did u do that command at 0:14 that shows a lot of others commands? im a beginner at SW. thanks

[@TheXShOcKwAvEz]

Simplesmente ressiona o botao "S", e aparece-te o menu. Podes modificar esse menu ao teu gosto em opcões.

[@adnansafat7010]

Please try to do in noob speed for guys like us, ur lightening speed is quite hard for us to catch up

[@pliskind]

The piston is an ellipse due to thermal expansion, so it can't be drawn as a circle!!!

[@adricat59]

Hi, I'm new and I was wondering if the technical drawings of this projects are maybe available? I would love to try first by myself and use the videos just as a reference when having trouble.

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@emreersan2524]

@@kushagraroy5081 Hi! May I also get the technical drawings?

[@rodrigochiozzini]

Very Nice !!!!! LIKE LIKE

[@mohammdheydari7051]

RCSW - TUTORIAIS DE SOLIDWORKS & IMPRESSÃO 3D hi can you geive me some information about color in solidwork who it shining

[@dannydemaat4668]

Is the hole of the piston rod bigger than the hole of the piston itself?

[@D0m1n4t0r]

But this isnt possible in real life

[@hussamkhalil1339]

Rectangle at 4:00 dimension?

[@SergoxGTA]

that sizes dont work when you put 76.2 that is not the correct size

[@anwarkallel6006]

*where can i find the dimensions please*

[@EPC-ue2ci]

the connection rod diameter is too large for the pin even at 63.5 the arm and pin need to be flush so there is no impact.

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@devansharora2719]

anybody facing any issues in the fillet part??

[@ugurokumus2892]

Hello guys after i saw some wrong dimensions in this video i checked grabcad whether this engine exist in there and i found it. Here is the link you can draw it by yourself! grabcad.com/library/v6-engine-137

[@ManikandanBalu]

i checked it .it was good, just a sign in requires

[@tapan4253]

that only model where is 2d diagram for practice.

[@utsavpatel398]

Blueprint please if you can share

[@ahtishamkhan442]

what is diminsion of first rectangle

[@plinsavi]

The length of the first rectangle is not important. The important thing is that the centers of the circunferences are 152,40 apart.

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@psychoboyjack285]

rectangle at 4:00 with no dimension and doesn't fit. People here have been asking the same question for 4 years and no answer.

[@plinsavi]

You have to change the dimension of the bigger hole from 76.2 to 63.5. There is an editing cut in the video that doesn't show that he changed the dimension. In 1:51 you can kind of see that the new dimension is 63.5.

[@prakk28]

where can I get detailed sketch please help me

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@julienmarielrakotoarison6012]

I like to fix your creo

[@JOSEGUZMAN-eb7rj]

el bulon mas pequeño que la biela....

[@markobenko6110]

6:30 When I put 1.25 radius it sends me a mistake

[@jimhunt1270]

I have the same problem on Solidworks 2016

[@bhaveshjadhav5330]

Same Problem in SW13

[@vladimirpotanin3258]

Hello, I don't use my SOLIDWORKS program much because I have another project at the moment! If anyone has a desire I can give the program for trainings or exercises.

[@marcusaurelius3439]

i want exercises pls :)

[@ammarboud6960]

Svp 3andi pesto Rani 7asal faih

[@reasoningquiz247]

bhai shahb exercise ki pdf hi providde krwado

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@leandrodamario4810]

Cual es el largo del cuadrado del minuto 4:23 ????

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@bhardwajkamal1112]

Also provide the drawing

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@vinayverma2120]

how to get sound????

[@alrawahikhalood8893]

where can i find the 2D sketch

[@kushagraroy5081]

Contact me for V6 Engine drawing Email- [e-mail]

[@GlaubenBestt]

9:31

[@Johan4014]

like si vienes de la upq

[@andreslazo9945]

your piston is really bad, a lot of dimensions no match in the assembly and you chance the dimensions of any diameters in the sketch and didnt mentions in the video

[@imrulkayes8083]

Cant u talk -_-

[@brouslikandor584]

Hello pls can u send me this designe by email

[@guilhermepaes2244]

Hi, First of all thank you for this excellent video. But I found on 4:00 the Rectangle doesn't fit. Did you change the dimensions? Please share it! Thank you very much