SOLVED 2005-2010 Chrysler 300c hemi Stalling, misfire, hesitation

2005-2010 Chrysler 300c 5.7 hemi
Stalling, misfire, hesitation problem solved

[@gregorykavasnika3175]

My 2005 300 c starting stalling, no error codes, even bought the expensive $400.00 analyzer, still no clue. this video stuck in my mind, bought the MOPAR Crank and Cam sensors, replaced both myself, car runs great again!

[@Godoyjr.]

Thank youuu im trying this for my chrysler , im basically thinking about changing alot of things but did not think about these sensors , my car have hard time starting and rpm jump up n down

[@baileyharston1476]

THANK YOU FOR THAT BECAUSE I HAVE CHANGED MY COIL PACK SPARK PLUGS COOLING FAN THERMOSTAT TEMPERATURE SENSOR ALL 4 02OXYGEN SENSOR AND I HAVE ANOTHER FUEL PUMP TO PUT IN A NEW POSt BATTERY CABLE AND I HAVE A 2007 CHRY 300C HEMI CHANGE MY PLUGS TO NTK ANYWAY I AM GOING TO CHANGE THE CRANK SENSOR AND CAM SENSOR BECAUSE I HAVE CHANGED A LOT THANK YOU FOR THE INFORMATION ON CHRY 300C HEMI AND MAY GOD BLESS YOU AMEN

[@ProbyJay]

My cars been running and then stalling like you say and it just randomly will turn off at a stop sign or light. I changed my passenger pump because a leak I had taken it up to the dealership for a multipoint inspection as well and they didn’t find anything. Do you think my car could be turning off because of these issues ?

[@user-fd6ry6ye6w]

I just ordered both waiting on them but guys make sure it’s mopar. Chrysler are picky when it comes to sensors

[@user-dr7xf9tj2q]

Mine has misfire on cylinder 2 an injector 2 code came up swapped it an still have that code light comes an goes … I’m stuck

[@arnoldhernandez7091]

Mine is doing the misfire on cylinder 7 I changed spark plugs if inignition coil and even the wires and it still does it. Why could it be? Spark plug on cylinder 7 was wet with oil

[@TRAVI_901]

I’m having the same issue I have changed coil pack, the spark plugs, spark plug wires. I have change the EGR valve, and when I pulled the plug it had some oil on the spark plugs in cylinder seven and I’m still having a misfire

[@fijitears]

There’s one for $1000 near me that occasionally stalls…. Kinda want it. Blue w 170k

[@dieselmechanic9824]

Thank you

[@MeSince1989]

You’re welcome anytime

[@kadams9148]

I have an 06 300c with the 5.7 hemi. Recently it idles roughly, not terrible but enough I can feel it. I'm so paranoid about this motor, it seems to have a lot of problems, valve seats, lifters , overheating, even the mds is rumored to cause problems.

[@MeSince1989]

well if you vibration then check into the motor mounts but honestly i got rid of my 300c because of the amount of problems that keep coming up. if it is at all possible, id get another car. but thats all i can say, i really not to sure what your issue could be, id have to have it in front of me to check it out.

[@lololucero1]

I just bought a 2005 Chrysler 300C for a commuter car and I’ve had it 2 weeks. Yesterday I stopped at a stop sign and it stalled out on me out of nowhere. The oil light came on for a min but went off. It started right back up and drove fine. I’m getting it oil change today but I’ve been surfing KZbin and I’ve noticed a lot of these cars have had this issue so I’m trying to identify the problem now so I can nip it in the bud. Does this sound like the exact same thing your car was doing?

[@MeSince1989]

Yes, mine did that once. Hope this helps

[@SageXteriorCleaning]

Did u find the fix because I have the same exact problem. Car stalls, red oil light pops on. Cam shaft and crank shaft sensors have been replaced. Car usually does this at higher temps around 210 and higher.

[@soulcrushrez2855]

Oil pressure sensor

[@SageXteriorCleaning]

Hey I’m having these exact problems. My mechanic said it was a bad ecu, spark plugs, oil leak, exhaust leak, and the cam shaft censor. So he replaced all those do u think I should still get the crank shaft censor fixed?

[@MeSince1989]

Well i now I went thru all of that with my car and I change the camshaft sensor and the crankshaft sensor and my car ran like a beast again.

[@SageXteriorCleaning]

Murphy Burnitt and still to this day it works perfectly fine. And have you heard about the valve seat drop problem the hemi has?

[@MeSince1989]

@@SageXteriorCleaning yeah I've heard about that. Kinda why I got rid of mine. Plus I have a lead foot so mpg was horrible for me.

[@SageXteriorCleaning]

Murphy Burnitt yea I got a heavy foot too. Mine at 114k I’m just hoping I can sell it without it dropping a valve seat cuz I know right around this amount of miles it happens. I’m gonna get a newer Chrysler around 2013-2017 cuz they don’t have that problem. The engine was changed in 09 but still hat valve seat issues until 2011/12

[@CoryLexi-ev8vu]

I've did that already

[@brendadawson5923]

Did not work on my Chrysler 300 c and I have changed just about everything I’m about to give up please help

[@MeSince1989]

What's it doing?

[@deathceller13]

om gyyaaadd sissstaaa tinkkss yaaa

[@jasondvd79]

I have these same issues however no p codes showing on the dash when I check for codes. Do you think it still be the same problem even though no codes coming up? Thanks in advance. 👍🏻

[@MeSince1989]

i didnt have any codes for it either but thats what it turned out to be.

[@jasondvd79]

@Murphy Automotive Repairs thank you, the issue seems to have disappeared strangely but I will still have it looked at.

[@Guillito306]

how did u find out it was the sensor the problem?

[@MeSince1989]

Sorry for the late response but just trial and error lol