SOLVED! How to login on Far Driver App with iOS & back on the Raptor Conversion (Electric ATV Build)

We noticed recently access to the advanced settings on the Far Driver app for iPhone was not working. After contacting Far Driver we have been made aware they are currently in the process of updating the APP and that access via iPhone may only be possible by this rather interesting hack. You need to log into the controller, and keep pressing log in until asked to enter a phone number. Exit from the app log back in and press Log in . This is only a temporary issue and will probably be fixed in the coming days. In the meantime this cool work around allows you to still setup and program your controller with an iPhone.
We also take a look at the Raptor ATV conversion project. We will be teaming up with RSR workshop ATV & MX specialists for a range of projects this raptor will be one of them.
We'll get the battery charged up for the next video

[@renegarcia1807]

Thanks for the tip about connecting the controller to the phone

[@callyourhits3963]

i just got my electric pitbike done today and noteced i couldn't change te parameters anymore. thank you for solving my problem!

[@-TheRealChris]

Thank you so much for covering this! Iphone user here too, do you think if/when they do fix it you guys could give us an update? Too scared to update the app at this point in case it gets locked further.

[@kazmirzleszno]

I welcome you. I have a problem with fardriver. Do you have a way. To reset or re-upload the firmware when there is no Bluetooth connection?

[@douglasblaedow5841]

Hi wondering if you might know would cause my fardriver to vibration on acceleration

[@MrDeceptacon88]

Hi what is the self learning lrocess is interrupted? Will there be any damage or can u just try self learn again??

[@BuildItTuneItEV]

Ever used the FD with the CT-22 Display?

[@shimbofpv6224]

thanks for the video. I want to buy a fardriver 72530 controller for my surron but I'm scared that I don't know how to configure it and that it's stuck in its box. Could you please make a video on how to configure a fardriver controller from keto? It would be of great help to everyone. Thanks a lot

[@lucianalu3708]

Ola,tenho uma fardriver Nd72680 ele nao salva as configurações feitas no app (Android) ,voce tem uma ideia pra me ajudar

[@user-zk7wt9bx9z]

My dongle says FOC311 and doesn't allow me to change many settings. Says Expert OLD on the app. Is there any updates or firmware I can get? Where to download new updates and firmware?

[@RichieRich-ug2wr]

I have everything wired up and my controller is not beeping anymore . Im Trying to pair my controller but the Bluetooth dongle is not lighting up nor is it pairing . What do it do ?

[@electricbike2062]

Where to connect the wiring harness for the ND96680 driver, you can show in more detail, otherwise I did not figure out half of the wires, how to connect them, for example, I found a regenerative brake wire, one wire, but where to get the second wire, how to connect them to the brake handle

[@mehmetalbay308]

Is there a .hex file for 72240 or 72260

[@freddywrx3338]

How an I get the app

[@douglasblaedow5841]

It won't let me but I have 2 yellow wires one with a red strip and the other has a brown strip and gray wire and a purple one and a blue one and a orange one all singles

[@douglasblaedow5841]

Hi just wondering if you might be able to help me again, when I go in to auto set up it is giving me a error hall sensors. I have a brand new wheel is it a problem with the wheel. Thank you

[@douglasblaedow5841]

Thank you

[@douglasblaedow5841]

Hi love your video just wondering if you can help me I have a fsrdriver 72 450 I can't find any wiring dai. I just need to know witch wire is for key I will add photo if I can thank you

[@KiloVoltBikes]

Single orange wire goes to battery +

[@douglasblaedow5841]

@@KiloVoltBikes thank you

[@KiloVoltBikes]

@@douglasblaedow5841 further more , send me your email il send you full wiring diagram

[@christianwagner6244]

Awesome controllers, terrible software...atleast for now :D Will hopefully get my 96530 soon.

[@armenvegas]

DAYUMMM THATS 30% ??? That's gonna do flips with no ramps

[@MrDeceptacon88]

Android for the win!! Apple likes to limit and block what we can do on oir phones ffs

[@Bastens]

You said the motor is overheating. I am betting that your motor is overheating because you have the gearing too tall. I am guessing that sprocket combo is 12:38 which means it will do 110mph at 6000 RPM ... but it will never reach that because that motor doesn't have the horsepower (NM) to overcome the wind resistance & weight at that speeds so essentially you are wasting a bunch of torque. With my Polaris Outlaw and a Zero 75-7R motor it uses 400Amps @ 100V (40kW) at 60mph so in reality you will never reach more than 50mph with the motor you have. If you gear it for a top speed of 50mph with either a gear box or jackshaft to increase torque you will not have overheating problems and you will bet better performance.

[@KiloVoltBikes]

Hi thanks for the comment / the motor wasn’t overheating it got to a normal operating temperature but it’s a water cooled motor running without coolant , we wanted to get an idea of the cooling requirements first so we ran it without any coolant to get a sample of motor temperature. Now we have an idea of what kind of radiator and cooling setup we need for the motor . The Polaris Outlaw sounds awesome do you have any videos of it running ? Thanks

[@Bastens]

@@KiloVoltBikes That is great, sounds like I misunderstood. I just made a video and posted it yesterday ... kzbin.info/www/bejne/eXqxd5iEptCehpY

[@devsmailbox1016]

Hey, you must have an old version of the App software. I've got v2.2.3 on IOS and it works fine no need to do anything special. It'd be useful to know about how to find the firmware version and how to update that using the App...

[@KiloVoltBikes]

Hi thanks for the message . This was filmed 5 months ago and was an older version of the software . We decided to keep the video up as it shows that fardriver are constantly updating and improving

[@HardcoreHokage-cw4uq]

I don't have pair of shitty ass sunglasses. Do I need some to make the app work?

[@KiloVoltBikes]

lol great way of getting someone to help you just chuck a few insults . best of luck homie

[@HardcoreHokage-cw4uq]

@@KiloVoltBikes lol just jesting with you. I've built a six wheel vehicle with pickup back driven by four hub motors on the rear. I've custom designed welded, cnc, and turned most of the parts. Full independent suspension traction control and abs braking. I've had it up to 66mph but my main issue now is making cat tracks for the rear so I don't have register it as a motor vehicle.

[@KiloVoltBikes]

@@HardcoreHokage-cw4uq best thing to do is make sure you’ve “binded” with the controller . On the connect page you will see a button which says bind , you’ll need to enter your email address and you will receive a code which you need to enter , once it says controller is bound app should work flawlessly

[@HardcoreHokage-cw4uq]

@@KiloVoltBikes ye I've using asi bac855 controller but I've burnt out two of them and there expensive as fuck. I'm probably gonna get a fardriver and reverse engineer it and make my own sinewave generator and programme the software to make it more durable and user friendly.

[@KiloVoltBikes]

@@HardcoreHokage-cw4uq the FarDrivers are already sine wave and I think you’ll find one of the most durable and user friendly controller out there ! I’ve put them thru hell and back . They seriously perform .