Solved Problems on Z - Parameters

In this video, the examples on the Z-parameter has been solved.
The timestamps for the different examples:
0:00 Introduction
0:21 Example 1
6:29 Example 2
11:15 Example 3 (Two-port Network with dependent source)
13:54 Example 4 (Two-port Network with dependent source)
The other useful videos related to Two-Port Network:
1) Introduction to Two-Port Network
• Introduction to Two-Po...
2) Z-Parameters
• Z Parameters Explained...
This video will be helpful to all the students of science and engineering in solving the problems on Z-parameters.
#TwoPortNetwork
#ZParameters
Follow my second channel:
/ @allaboutelectronics-quiz
Follow me on Facebook:
/ allaboutelecronics
Follow me on Instagram:
/ all_about.electronics
Music Credit:
www.bensound.com/

[@ALLABOUTELECTRONICS]

The timestamps for the different solved examples: 0:21 Example 1 6:29 Example 2 11:15 Example 3 (Two-port Network with dependent source) 13:54 Example 4 (Two-port Network with dependent source)

[@sureshyamoji3851]

Ur teaching skills r amazing sir.But my request is plz try to explain whole problem on a single screen. Its making us to rewind and see the previous steps for further substitutions and understanding purpose sir.

[@priyapandey3959]

Prfect for Z parameter example 🙂

[@ritwiktiwari6517]

Thank You So Much!

[@newbie8051]

Great explanation, thank you sir !!!

[@santhoshiatkuri6884]

Thanks alot.... For giving a excellent explanation.... 👌👌😊

[@raghut720]

Thank You!!!

[@mayurshah9131]

Excellent 👍👌

[@gpmahendra7129]

Nice explanation. Would you please upload the remaining Two Port Parameters related video as early as possible?

[@ALLABOUTELECTRONICS]

Yes, will upload very soon.

[@dipikathakur8216]

@@ALLABOUTELECTRONICS have you uploaded the other parameter.?or not

[@narendrakumarguruvu9041]

thanks for the help bro

[@mnada72]

Your video is very impressive, nicely explained. but I would suggest you to make one example of transistor circuit to show the role played by input impedance and output impedance in the real world

[@electricalisfuture5008]

👍

[@dungaajay6085]

cant we use nodal analysis in the first problem but i am getting v2 different from what u got?

[@usamazahid1]

keep it up the nice work....short and brief video

[@newhope5729]

Hey please tell me what is Z11, Z22, Z21 and Z12???

[@schurup2994]

thank you sir

[@soul2197]

Have you made a video on first order circuits for initial conditions of RL and RC

[@ALLABOUTELECTRONICS]

Yes, please check this video: kzbin.info/www/bejne/garPe2WsZsSWY9E

[@RAHUL-xy1ds]

How's the direction of current -I in example 2?is it because of directions chosen in first equation? Also,is it a fact we can learn by heart that lattice network is symmetric and reciprocal? How did you reach at that conclusion?

[@ALLABOUTELECTRONICS]

Yes, the direction of the current is as per the earlier equation. Because during the calculation, Port 2 is considered as open. So, no current will flow in that direction. Yes, the given lattice network is symmetrical and reciprocal. And in fact, that is also evident, if you just look at the network. But when in doubt, you can also find the remaining two parameters to check the conditions. I hope it will clear your doubt.

[@RAHUL-xy1ds]

@@ALLABOUTELECTRONICS thank you bro

[@shashidhar5204]

It would be very much helpful if u share whatever u written as on ppt to us

[@dhirajkumarsahu999]

thank you for the video sir...please make a video on phase-locked loop. No other has uploaded a proper video on it. Its a request sir.

[@ALLABOUTELECTRONICS]

Yes, I will definitely upload it. But as I have just started the series on Two- Port Network, so will upload it once it gets over.

[@dhirajkumarsahu999]

@@ALLABOUTELECTRONICS will be waiting for it sir..

[@ohenebagyimahgyimah7057]

Please what can you use this circuit for??

[@ALLABOUTELECTRONICS]

As I mentioned in the introductory video of the two port network, for the analysis of many practical network, the two port parameters are very useful. For example, transmission line, small signal model of BJT etc. I hope it will give clear your doubt.

[@gaganpandey7765]

In example 2 how you know this network is symmetrical and reciprocal

[@pavanboda-f7s]

which book from this problem can u send me book pdf

[@RAHUL-xy1ds]

How's the direction of current -I in example 2?

[@vigneshbhaktha7]

same doubt

[@venkyvenkatesh7462]

Same doubt.. it's absolutely wrong in ex:-2 . There is Zb-Za/2

[@12jodyt29]

Sir please provide any method to solve lattice circuits of h parameters. 🙏

[@ALLABOUTELECTRONICS]

Will cover such example on the second channel

[@12jodyt29]

Please remind us.

[@kaursingh637]

thank u sir for excellent lecture =please suggest a book

[@ALLABOUTELECTRONICS]

You can refer Network analysis by van Valkenburg and fundamental of electrical circuit by Matthew Sadiku.

[@shamaparveen2000]

Sir...how did I2 become positive in the mesh 1 (example-3)

[@ALLABOUTELECTRONICS]

Both I1 and I2 are flowing in the same direction through 1 ohm resistor. That's why voltage drop across 1 ohm resistor is (1ohm)* (I1 + I2). I hope it will clear your doubt. If you still have any doubt then let me know here.

[@shamaparveen2000]

@@ALLABOUTELECTRONICS oh...now I understand sir..... thank you soo much sir 😊...

[@Mr_Jagadeesh77]

❤❤❤❤❤❤❤❤❤

[@venkatalokesh1117]

Sir. In the last example.. We can apply kvl aslo.. Isn't it true sir?

[@ALLABOUTELECTRONICS]

Yes, there are many ways to solve one example. So, you can choose whatever method you are comfortable with.

[@vimushalan]

9:14 sir in that time why you put negative sign ..."ZaI-ZbI"...?

[@ALLABOUTELECTRONICS]

Because in the Zb, the direction of current I is opposite to the direction in which we have applied KVL.

[@narasimanarasimarao9898]

No homework problem this time ah

[@its_radhakant]

At the last example, i got stuck!! When to apply KVL and when to KCL??

[@ALLABOUTELECTRONICS]

It depends on the circuit. You can also find the parameters using KVL. But here, since there is a dependent current source in between, so you will encounter the supermesh. That's why here KCL is used.

[@its_radhakant]

@@ALLABOUTELECTRONICS Now clear. Thank you

[@ralph7193]

Why in example 2 I=I/2 + I/2

[@ALLABOUTELECTRONICS]

Current I1 = I + I = 2*I. Therefore, I = I1/ 2.

[@fardeenbaig0013]

Sir your last example problem was wrong.

[@ALLABOUTELECTRONICS]

I have already mentioned the correction in the video.

[@ramankesale9812]

17:35 teaching skill hats off but your I and z looks same bro it is confusing for some people like me 🥲

[@ALLABOUTELECTRONICS]

Yes, will take care of it in the future videos.

[@ramankesale9812]

@@ALLABOUTELECTRONICS thank u....🙏🙏

[@ritwiktiwari6517]

Thank You So Much!

[@electricalisfuture5008]

👍