Sondors LCD Settings

[@graemewilson5459]

Very helpful thanks you are the only one who bothered to show us all what the settings are. Top Man !!!

[@SuperSport1966]

Thank you!

[@Funa559]

This helped me alot with my Sondors E bike, Thank You!

[@DeadlyDanDaMan]

This was incredibly helpful. Thank you:)

[@SuperSport1966]

DeadlyDanDaMan Awesome! Thank you for letting me know. 😉

[@nicholaschastain2060]

Thanks this helped even found manual that matches my display for the hack cause its just a little different for mine i have the new step i just have to push the buttons again once i have gotten into the next screen

[@jimmidan59]

Is there a way to adjust the battery level indicator? Mine shows nothing even with a fully charged battery.

[@SuperSport1966]

I will admit, I’m not positive. But I would check the below item as I believe it is related to the battery levels. P5=12 (Power Monitoring Mode) Also, if you watch the updated version of this video, I have the parameters of a stock bike listed on the screen so you can verify if yours is set similarly. Updated video: Sondors LCD P and C Settings kzbin.info/www/bejne/g5SohXRpgryghLc

[@jimmidan59]

@@SuperSport1966 Nothing about the battery level indicator. I have a brand new, fully charged battery installed.

[@SuperSport1966]

Which bike do you have? Is it the same original SONDORS as in this video?

[@jimmidan59]

@@SuperSport1966 Yes.

[@SuperSport1966]

Did you verify all the settings match the video? You can also try a full reset using the C10 option as shown in the video. If that does not work, I would wonder if the battery isn’t sending the data to the controller. Is it a SONDORS original battery, or aftermarket?

[@drusafa8602]

Thanks for the great video.

[@ninjaunknown1093]

Good video very helpful,I had a problem with my cruise locking on and now I can sort it thanks too you

[@SuperSport1966]

That's great, thank you for letting me know. Glad to help when I can.

[@davidrossmiller8349]

If someone's looking to upgrade to that it's called a ktlcd-3 screen....FYI if a newer Sondors like my fold X, you have to replace throttle, controller and LCD for it to work as well as the Juliet connecters.....worth it.

[@LauryDepp]

I have a different LDC screen mine is Crouse bike 1 step? 2019 I guess. Where did u get the manual from . How do you know what model is your E-bike ? ( I have a Sondors too )

[@SuperSport1966]

Is this your LCD? Or is it color instead? sondorsforum.com/topic/2051-2018-sondors-ebike-kd51c-lcd-setup-manual/

[@kennygoss4442]

Thanks.I have an upgraded (12.8) battery. Do you know if any settings should reflect that?

[@SuperSport1966]

Kenny Goss None that I'm aware of. I'm using the same battery, and it appears to register correctly.

[@chrismays6509]

How do I turn backlight on and off thanks

[@SuperSport1966]

I don't have this bike anymore, but I believe you hold the UP button until it switches on or off.

[@chrismays6509]

Good memory thanks for the reply

[@kid45620]

Thank you. I'm waiting for the MXS will this also work for the new display. Great info.

[@SuperSport1966]

Frank Thomas I’m not really sure. I’ve never been able to get my hands on one. Congratulations! I’m sure you’ll love it!

[@kid45620]

@@SuperSport1966 I figured it's going to 2,000 might as well get it for 1500. When u take off the governor the top speed is 40 you think.

[@kid45620]

@@SuperSport1966 Thank you watched yall owners of this brand n yall reviews n said I'm gonna get one. I been riding fix gear all my life time to have more fun. Thank you for you time n info.

[@SuperSport1966]

Frank Thomas - unfortunately, I had to sell mine a while back, but I do plan to get one of these newer models at some point. It’s such a fun bike to ride, and I actually got great exercise with the ability to travel further.

[@kid45620]

@@SuperSport1966 That's cool.

[@antlovesmel]

Is there a way to do throttle in assist level zero?

[@SuperSport1966]

I don't believe so. I think when it's in level zero, even the thumb throttle is inactive. Unfortunately, I do not have this bicycle anymore to test it right now.

[@antlovesmel]

SuperSport1966 Thank you for the reply. I think you are right unfortunately.

[@keildouglas]

Hi. Thanks for the detailed video. Is there an easy way to turn the LCD display light on and off? My LCD screen did not come with instructions and I haven't found out how to do so or found info online. I ride at night so any help would be appreciated. Thx!

[@SuperSport1966]

I don’t have my bike anymore, so I cannot test this, but if I remember correctly, you press and hold the UP Button when the LCD is on to turn the light on and off.

[@marieeggebroten5410]

thanks yes, that just worked for me

[@imagine3D.official_channel]

Thank you!!!!!!!

[@ksingleton101]

Awesome Video! Thank You

[@SuperSport1966]

K Simpson Thank You!

[@marieeggebroten5410]

very helpful, thanks!

[@tna2me197]

is there a way to clear the trip odometer?

[@SuperSport1966]

TNA2Me This image shows how. Let me know if you have trouble viewing it. photos.app.goo.gl/gTREs9z7xgygeauN2

[@tna2me197]

AH! Got it! Thank you! I figured it was some simple combination or button hold thing but didn't want to start experimenting for concern of messing things up. Thank you!

[@slipinn]

Nice video. Where can we get a list of "C". Settings and P settings or learn more on parameters?

[@SuperSport1966]

My updated video here shows the C and P settings. I don't know yet of a full list of what they do, but on the Sondors Owners Group on Facebook, there are a few people that probably know. kzbin.info/www/bejne/g5SohXRpgryghLc

[@MattMurton]

Great vid, by raising the max speed in the settings does it then override the 20mph governor on the bike?

[@SuperSport1966]

Matt Murton Yes it does. There are still limitations in the battery and motor, so you will actually get around 23 mph Throttle only. But if you pedal real hard, you can get up to around 28 mph and still get some assist.

[@MattMurton]

Cool, I am looking at getting a Thin, but didn't know if I should just order the controller and LCD from Luna, I would guess running the stock battery there are limitations on top speed anyway.

[@SuperSport1966]

That is correct. I would order the LCD and Controller from Luna or one of the other vendors. It's about the same price as the Original LCD alone, and if you ever want to upgrade the Controller later, you have to purchase another LCD. If you do the Controller now, you may get more speed and power from even the stock battery, but it will shorten the distance it will travel. But, at that point, you will be ready for an L48 Battery. That's what I wanted to do with mine. The L48 for me was the perfect upgrade. I didn't need crazy speed, just more distance and a slight power increase. PS: I sold my second Sondors just the other day. I'll get another in time, but for now, I'm without a Sondors. I didn't sell because I didn't like the bike, I LOVED it, I sold for medical bills reasons. But I'll be back! ;)

[@SuperSport1966]

EDIT: You are looking at thin, so you'd be looking at the LT48 battery. electrobikeworld.com/products/lt48-48v-14ah-lithium-ion-battery IF you are going to update your battery, then buy the cheapest stock battery.

[@MattMurton]

SuperSport1966 thanks, great advice. Are you still happy with your Sondors? Them seem to have a cult like following.

[@eyeonart6865]

What I want to know is I know the bike goes 20 miles an hour but when I start up bike to go is pedal assist mode 1 like 5 miles an hour 2 -10 3-15 4-20 ect?

[@SuperSport1966]

I apologize, as I don't have this bike anymore, but from memory, I think your estimates are pretty close. It does of course depend on how much peddle you add in, but I think you are pretty close.

[@GeorgeDeliaAdventureChannel]

I received my e Bike Sondors yesterday.,very nice bike. My LCD looks like does not working the battery correctly appears as if it had no charge. You have some experience with that. I charge the battery .. and I run for the first time and everything works except.

[@SuperSport1966]

If you have a stock bike, and if you get a chance, please verify all your settings are set the same as in the video. I believe there is one setting that causes that, but I don't remember which one. You should also join the Sondors Storm Owners Group on Facebook. LOTS of good help and info on there. If checking settings does not help, then that group will for sure be able to tell you what's wrong. facebook.com/groups/StormOwnersGroup/

[@outcast566]

Very helpful thank you.

[@SuperSport1966]

outcast566 Glad it helped, thank you for watching.

[@jamiemoffatt50]

My screen doesn’t display battery or speed?

[@SuperSport1966]

Screw You! I don’t have my Somdors anymore to check the computer, but maybe see this other video as it has the default settings shown in the upper left of the screen. I would think that maybe one of your settings got turned off. Or, you have physical mechanical issues like broken wire, loose speed sensor, etc... kzbin.info/www/bejne/g5SohXRpgryghLc

[@blackfox-rs6781]

Thanks understood very clearly

[@SuperSport1966]

Thank you, I wasn't sure if it would come through correctly.

[@Munzer1977]

No info on how to factory reset the thing. I have 555 screen flashing and no option to go anywhere from there or to leave the page.

[@SuperSport1966]

Munther G-mail Unfortunately, I’m not aware of any way to factory reset it, other than flashing new firmware back to it again. And for that, I believe you have to have another LCD to get the firmware from. That’s if I remember correctly.

[@slipinn]

Thank you.

[@GeorgeDeliaAdventureChannel]

My Battery is Panasonic cell 12.8 Ah

[@LauryDepp]

All you guys are explaining technical useless things. Why don't try to be more simple ! I just want to know how to put the miles in 0 so Everytime I took a ride I will know how many miles I did in that particular ride. ( Instead my bike is set up to see the total of the miles I ever did ! Something useless for me except I want to sell it. ( Like a car ) same thing .

[@SuperSport1966]

This video was specifically meant for those that wanted advanced information about this LCD. There's already a lot of info out there for the basic controls. To clear your trip Odometer; After powering on, wait 5 seconds. Then press and hold the UP and DOWN buttons simultaneously for about 2 seconds. The Trip Time and Trip Distance will flash, then press and hold the Power Button until they both reset to Zero. If you still have issues, please feel free to get back to me. ;)